All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sinthu Raja <sinthu.raja@mistralsolutions.com>
To: u-boot@lists.denx.de, Simon Glass <sjg@chromium.org>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Marek Vasut <marex@denx.de>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Sinthu Raja <sinthu.raja@ti.com>
Subject: [PATCH 08/11] arm: dts: Add initial support for AM68 Starter Kit System on Module
Date: Thu, 27 Oct 2022 16:18:43 +0530	[thread overview]
Message-ID: <20221027104846.11820-9-sinthu.raja@ti.com> (raw)
In-Reply-To: <20221027104846.11820-1-sinthu.raja@ti.com>

From: Sinthu Raja <sinthu.raja@ti.com>

AM68 Starter Kit (SK) is a low cost, small form factor board designed
for TI’s AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high
performance vision accelerators, hardware accelerators, latest C71x
DSP, high bandwidth real-time IPs for capture and display. The SoC is
power optimized to provide best in class performance for industrial
applications.

        AM68 SK supports the following interfaces:
        * 16 GB LPDDR4 RAM
        * x1 Gigabit Ethernet interface
        * x1 USB 3.1 Type-C port
        * x2 USB 3.1 Type-A ports
        * x1 PCIe M.2 M Key
        * 512 Mbit OSPI flash
        * x2 CSI2 Camera interface (RPi and TI Camera connector)
        * 40-pin Raspberry Pi GPIO header

SK's System on Module (SoM) contains the SoC, PMIC, DDR and OSPI flash.
Therefore, add support for the components present on the SoM.

Schematics: https://www.ti.com/lit/zip/SPRR463
TRM: http://www.ti.com/lit/pdf/spruj28

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
---
 arch/arm/dts/k3-am68-sk-som.dtsi | 167 +++++++++++++++++++++++++++++++
 1 file changed, 167 insertions(+)
 create mode 100644 arch/arm/dts/k3-am68-sk-som.dtsi

diff --git a/arch/arm/dts/k3-am68-sk-som.dtsi b/arch/arm/dts/k3-am68-sk-som.dtsi
new file mode 100644
index 0000000000..b8bec1f335
--- /dev/null
+++ b/arch/arm/dts/k3-am68-sk-som.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 16 GB RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x03 0x80000000>;
+	};
+
+	/* Reserving memory regions still pending */
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx0 {
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
+			J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
+			J721S2_WKUP_IOPAD(0x03c, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */
+			J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */
+		>;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "disabled";
+};
+
+&mailbox0_cluster1 {
+	status = "disabled";
+};
+
+&mailbox0_cluster2 {
+	status = "disabled";
+};
+
+&mailbox0_cluster3 {
+	status = "disabled";
+};
+
+&mailbox0_cluster4 {
+	status = "disabled";
+};
+
+&mailbox0_cluster5 {
+	status = "disabled";
+};
+
+&mailbox0_cluster6 {
+	status = "disabled";
+};
+
+&mailbox0_cluster7 {
+	status = "disabled";
+};
+
+&mailbox0_cluster8 {
+	status = "disabled";
+};
+
+&mailbox0_cluster9 {
+	status = "disabled";
+};
+
+&mailbox0_cluster10 {
+	status = "disabled";
+};
+
+&mailbox0_cluster11 {
+	status = "disabled";
+};
+
+&mailbox1_cluster0 {
+	status = "disabled";
+};
+
+&mailbox1_cluster1 {
+	status = "disabled";
+};
+
+&mailbox1_cluster2 {
+	status = "disabled";
+};
+
+&mailbox1_cluster3 {
+	status = "disabled";
+};
+
+&mailbox1_cluster4 {
+	status = "disabled";
+};
+
+&mailbox1_cluster5 {
+	status = "disabled";
+};
+
+&mailbox1_cluster6 {
+	status = "disabled";
+};
+
+&mailbox1_cluster7 {
+	status = "disabled";
+};
+
+&mailbox1_cluster8 {
+	status = "disabled";
+};
+
+&mailbox1_cluster9 {
+	status = "disabled";
+};
+
+&mailbox1_cluster10 {
+	status = "disabled";
+};
+
+&mailbox1_cluster11 {
+	status = "disabled";
+};
-- 
2.36.1


  parent reply	other threads:[~2022-10-27 11:15 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-27 10:48 [PATCH 00/11] AM68 SK: Add initial support for AM68 Starter Kit Sinthu Raja
2022-10-27 10:48 ` [PATCH 01/11] configs: j721s2_evm_r5: Enable support for building multiple dtbs into FIT Sinthu Raja
2022-10-27 10:48 ` [PATCH 02/11] configs: j721s2_evm_a72: " Sinthu Raja
2022-10-27 10:48 ` [PATCH 03/11] configs: j721s2_evm: Enable configs to store env in MMC FAT partition Sinthu Raja
2022-10-27 10:48 ` [PATCH 04/11] board: ti: j721s2: Add support to update board_name for am68-sk Sinthu Raja
2022-10-27 12:59   ` Tom Rini
2022-10-27 10:48 ` [PATCH 05/11] board: ti: j721s2: Enable support for reading EEPROM at next alternate address Sinthu Raja
2022-10-27 10:48 ` [PATCH 06/11] board: ti: j721s2: Add support for detecting multiple device trees Sinthu Raja
2022-10-27 13:02   ` Tom Rini
2022-10-27 10:48 ` [PATCH 07/11] arm: j721s2: Add support for selecting DT based on EEPROM Sinthu Raja
2022-10-27 13:04   ` Tom Rini
2022-10-27 10:48 ` Sinthu Raja [this message]
2022-10-27 13:06   ` [PATCH 08/11] arm: dts: Add initial support for AM68 Starter Kit System on Module Tom Rini
2022-10-27 10:48 ` [PATCH 09/11] arm: dts: Add support for A72 specific AM68 Starter Kit Base Board Sinthu Raja
2022-10-27 10:48 ` [PATCH 10/11] arm: dts: k3-am68-sk: Add r5 specific dt support Sinthu Raja
2022-10-27 10:48 ` [PATCH 11/11] include: configs: Update env for selecting right dtb Sinthu Raja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221027104846.11820-9-sinthu.raja@ti.com \
    --to=sinthu.raja@mistralsolutions.com \
    --cc=marcel.ziswiler@toradex.com \
    --cc=marex@denx.de \
    --cc=sinthu.raja@ti.com \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.