[PATCH v3 09/12] i2c: designware: Simplify master interrupt handler nesting

[Jarkko Nikula <jarkko.nikula@linux.intel.com>]

In my opinion a few lines of spurious interrupt detection code can be
moved to the actual master interrupt handling function i2c_dw_isr()
without hurting readability.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v3: s/opinnion/opinion/. Thanks Andy for noticing.
---
 drivers/i2c/busses/i2c-designware-master.c | 33 ++++++++--------------
 1 file changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 9c2c9d002dc3..dfb499e54c05 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -711,9 +711,18 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
  * Interrupt service routine. This gets called whenever an I2C master interrupt
  * occurs.
  */
-static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 {
-	u32 stat;
+	struct dw_i2c_dev *dev = dev_id;
+	u32 stat, enabled;
+
+	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
+	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
+	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+		return IRQ_NONE;
+	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
+		return IRQ_NONE;
+	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
 
 	stat = i2c_dw_read_clear_intrbits(dev);
 
@@ -726,7 +735,7 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 		 * the HW active).
 		 */
 		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		return 0;
+		return IRQ_HANDLED;
 	}
 
 	if (stat & DW_IC_INTR_TX_ABRT) {
@@ -765,24 +774,6 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 		regmap_write(dev->map, DW_IC_INTR_MASK, stat);
 	}
 
-	return 0;
-}
-
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
-{
-	struct dw_i2c_dev *dev = dev_id;
-	u32 stat, enabled;
-
-	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
-	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
-	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
-		return IRQ_NONE;
-	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
-		return IRQ_NONE;
-	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
-
-	i2c_dw_irq_handler_master(dev);
-
 	return IRQ_HANDLED;
 }
 
-- 
2.35.1