From: Samuel Holland <samuel@sholland.org>
To: Kishon Vijay Abraham I <kishon@kernel.org>,
Vinod Koul <vkoul@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maxime Ripard <mripard@kernel.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Samuel Holland <samuel@sholland.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH v2 7/8] phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
Date: Sun, 13 Nov 2022 20:21:12 -0600 [thread overview]
Message-ID: <20221114022113.31694-8-samuel@sholland.org> (raw)
In-Reply-To: <20221114022113.31694-1-samuel@sholland.org>
The A100 variant uses the same values for the timing registers, and it
uses the same final power-on sequence, but it needs a different analog
register configuration in the middle. Support this by moving the
variant-specific parts to a hook provided by the variant.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v1)
drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 59 ++++++++++++---------
1 file changed, 35 insertions(+), 24 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index a2afedc399fd..ac144ee0f0a6 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -114,7 +114,10 @@ enum sun6i_dphy_direction {
SUN6I_DPHY_DIRECTION_RX,
};
+struct sun6i_dphy;
+
struct sun6i_dphy_variant {
+ void (*tx_power_on)(struct sun6i_dphy *dphy);
bool rx_supported;
};
@@ -156,33 +159,10 @@ static int sun6i_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
return 0;
}
-static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
{
u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
- regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
- SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
- SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
- SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
- SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
- SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
- SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
- SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
- SUN6I_DPHY_TX_TIME1_CLK_POST(10));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
- SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
- SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
- SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
-
regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
SUN6I_DPHY_ANA0_REG_PWS |
SUN6I_DPHY_ANA0_REG_DMPC |
@@ -214,6 +194,36 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
SUN6I_DPHY_ANA3_EN_LDOC |
SUN6I_DPHY_ANA3_EN_LDOD);
udelay(1);
+}
+
+static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+{
+ u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
+ SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
+ SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
+ SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
+ SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
+ SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
+ SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
+ SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
+ SUN6I_DPHY_TX_TIME1_CLK_POST(10));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
+ SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
+
+ dphy->variant->tx_power_on(dphy);
regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA3_REG,
SUN6I_DPHY_ANA3_EN_VTTC |
@@ -470,6 +480,7 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
}
static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
+ .tx_power_on = sun6i_a31_mipi_dphy_tx_power_on,
.rx_supported = true,
};
--
2.37.3
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Kishon Vijay Abraham I <kishon@kernel.org>,
Vinod Koul <vkoul@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maxime Ripard <mripard@kernel.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Samuel Holland <samuel@sholland.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH v2 7/8] phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
Date: Sun, 13 Nov 2022 20:21:12 -0600 [thread overview]
Message-ID: <20221114022113.31694-8-samuel@sholland.org> (raw)
In-Reply-To: <20221114022113.31694-1-samuel@sholland.org>
The A100 variant uses the same values for the timing registers, and it
uses the same final power-on sequence, but it needs a different analog
register configuration in the middle. Support this by moving the
variant-specific parts to a hook provided by the variant.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v1)
drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 59 ++++++++++++---------
1 file changed, 35 insertions(+), 24 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index a2afedc399fd..ac144ee0f0a6 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -114,7 +114,10 @@ enum sun6i_dphy_direction {
SUN6I_DPHY_DIRECTION_RX,
};
+struct sun6i_dphy;
+
struct sun6i_dphy_variant {
+ void (*tx_power_on)(struct sun6i_dphy *dphy);
bool rx_supported;
};
@@ -156,33 +159,10 @@ static int sun6i_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
return 0;
}
-static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
{
u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
- regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
- SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
- SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
- SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
- SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
- SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
- SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
- SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
- SUN6I_DPHY_TX_TIME1_CLK_POST(10));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
- SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
- SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
- SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
-
regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
SUN6I_DPHY_ANA0_REG_PWS |
SUN6I_DPHY_ANA0_REG_DMPC |
@@ -214,6 +194,36 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
SUN6I_DPHY_ANA3_EN_LDOC |
SUN6I_DPHY_ANA3_EN_LDOD);
udelay(1);
+}
+
+static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+{
+ u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
+ SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
+ SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
+ SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
+ SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
+ SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
+ SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
+ SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
+ SUN6I_DPHY_TX_TIME1_CLK_POST(10));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
+ SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
+
+ dphy->variant->tx_power_on(dphy);
regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA3_REG,
SUN6I_DPHY_ANA3_EN_VTTC |
@@ -470,6 +480,7 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
}
static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
+ .tx_power_on = sun6i_a31_mipi_dphy_tx_power_on,
.rx_supported = true,
};
--
2.37.3
WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Kishon Vijay Abraham I <kishon@kernel.org>,
Vinod Koul <vkoul@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maxime Ripard <mripard@kernel.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Samuel Holland <samuel@sholland.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH v2 7/8] phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
Date: Sun, 13 Nov 2022 20:21:12 -0600 [thread overview]
Message-ID: <20221114022113.31694-8-samuel@sholland.org> (raw)
In-Reply-To: <20221114022113.31694-1-samuel@sholland.org>
The A100 variant uses the same values for the timing registers, and it
uses the same final power-on sequence, but it needs a different analog
register configuration in the middle. Support this by moving the
variant-specific parts to a hook provided by the variant.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
(no changes since v1)
drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 59 ++++++++++++---------
1 file changed, 35 insertions(+), 24 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index a2afedc399fd..ac144ee0f0a6 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -114,7 +114,10 @@ enum sun6i_dphy_direction {
SUN6I_DPHY_DIRECTION_RX,
};
+struct sun6i_dphy;
+
struct sun6i_dphy_variant {
+ void (*tx_power_on)(struct sun6i_dphy *dphy);
bool rx_supported;
};
@@ -156,33 +159,10 @@ static int sun6i_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
return 0;
}
-static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
{
u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
- regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
- SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
- SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
- SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
- SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
- SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
- SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
- SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
- SUN6I_DPHY_TX_TIME1_CLK_POST(10));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
- SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
-
- regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
- SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
- SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
-
regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
SUN6I_DPHY_ANA0_REG_PWS |
SUN6I_DPHY_ANA0_REG_DMPC |
@@ -214,6 +194,36 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
SUN6I_DPHY_ANA3_EN_LDOC |
SUN6I_DPHY_ANA3_EN_LDOD);
udelay(1);
+}
+
+static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
+{
+ u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG,
+ SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG,
+ SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) |
+ SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) |
+ SUN6I_DPHY_TX_TIME0_HS_TRAIL(10));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG,
+ SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) |
+ SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) |
+ SUN6I_DPHY_TX_TIME1_CLK_PRE(3) |
+ SUN6I_DPHY_TX_TIME1_CLK_POST(10));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG,
+ SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30));
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG,
+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
+ SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
+
+ dphy->variant->tx_power_on(dphy);
regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA3_REG,
SUN6I_DPHY_ANA3_EN_VTTC |
@@ -470,6 +480,7 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
}
static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
+ .tx_power_on = sun6i_a31_mipi_dphy_tx_power_on,
.rx_supported = true,
};
--
2.37.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-14 2:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-14 2:21 [PATCH v2 0/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` [PATCH v2 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 8:24 ` Krzysztof Kozlowski
2022-11-14 8:24 ` Krzysztof Kozlowski
2022-11-14 8:24 ` Krzysztof Kozlowski
2022-11-14 2:21 ` [PATCH v2 2/8] ARM: dts: sun8i: a33: Add DPHY interrupt Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` [PATCH v2 3/8] arm64: dts: allwinner: a64: " Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` [PATCH v2 4/8] dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` [PATCH v2 5/8] phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` [PATCH v2 6/8] phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland [this message]
2022-11-14 2:21 ` [PATCH v2 7/8] phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` [PATCH v2 8/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-14 2:21 ` Samuel Holland
2022-11-24 17:34 ` [PATCH v2 0/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY Vinod Koul
2022-11-24 17:34 ` Vinod Koul
2022-11-24 17:34 ` Vinod Koul
2023-01-08 20:26 ` Jernej Škrabec
2023-01-08 20:26 ` Jernej Škrabec
2023-01-08 20:26 ` Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221114022113.31694-8-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mripard@kernel.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.