From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 12/14] clk: starfive: Add StarFive JH7110 always-on clock driver
Date: Fri, 18 Nov 2022 09:06:25 +0800 [thread overview]
Message-ID: <20221118010627.70576-13-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20221118010627.70576-1-hal.feng@starfivetech.com>
From: Emil Renner Berthing <kernel@esmil.dk>
Add driver for the StarFive JH7110 always-on clock controller
and register an auxiliary device for always-on reset controller
which is named as "reset-aon".
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/clk/starfive/Kconfig | 10 ++
drivers/clk/starfive/Makefile | 1 +
.../clk/starfive/clk-starfive-jh7110-aon.c | 165 ++++++++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 7a6ff6614c74..baa602d384b7 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -30,3 +30,13 @@ config CLK_STARFIVE_JH7110_SYS
help
Say yes here to support the system clock controller on the
StarFive JH7110 SoC.
+
+config CLK_STARFIVE_JH7110_AON
+ tristate "StarFive JH7110 always-on clock support"
+ depends on CLK_STARFIVE_JH7110_SYS
+ select AUXILIARY_BUS
+ select CLK_STARFIVE_JH71X0
+ default CLK_STARFIVE_JH7110_SYS
+ help
+ Say yes here to support the always-on clock controller on the
+ StarFive JH7110 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 5ca4e887fb9c..f3df7d957b1e 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7100) += clk-starfive-jh7100.o
obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO) += clk-starfive-jh7100-audio.o
obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS) += clk-starfive-jh7110-sys.o
+obj-$(CONFIG_CLK_STARFIVE_JH7110_AON) += clk-starfive-jh7110-aon.o
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-aon.c b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
new file mode 100644
index 000000000000..643728f9904a
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH7110 Always-On Clock Driver
+ *
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/starfive-jh7110.h>
+
+#include "clk-starfive-jh71x0.h"
+
+/* external clocks */
+#define JH7110_AONCLK_OSC (JH7110_AONCLK_END + 0)
+#define JH7110_AONCLK_RTC (JH7110_AONCLK_END + 1)
+#define JH7110_AONCLK_GMAC0_RMII_REFIN (JH7110_AONCLK_END + 2)
+#define JH7110_AONCLK_GMAC0_RGMII_RXIN (JH7110_AONCLK_END + 3)
+#define JH7110_AONCLK_STG_AXIAHB (JH7110_AONCLK_END + 4)
+#define JH7110_AONCLK_APB_BUS_FUNC (JH7110_AONCLK_END + 5)
+#define JH7110_AONCLK_GMAC0_GTXCLK (JH7110_AONCLK_END + 6)
+
+static const struct jh71x0_clk_data jh7110_aonclk_data[] = {
+ /* source */
+ JH71X0__DIV(JH7110_AONCLK_OSC_DIV4, "osc_div4", 4,
+ JH7110_AONCLK_OSC),
+ JH71X0__MUX(JH7110_AONCLK_APB_FUNC, "aon_apb_func", 2,
+ JH7110_AONCLK_OSC_DIV4,
+ JH7110_AONCLK_OSC),
+ /* gmac0 */
+ JH71X0_GATE(JH7110_AONCLK_GMAC0_AHB, "gmac0_ahb", 0,
+ JH7110_AONCLK_STG_AXIAHB),
+ JH71X0_GATE(JH7110_AONCLK_GMAC0_AXI, "gmac0_axi", 0,
+ JH7110_AONCLK_STG_AXIAHB),
+ JH71X0__DIV(JH7110_AONCLK_GMAC0_RMII_RTX, "gmac0_rmii_rtx", 30,
+ JH7110_AONCLK_GMAC0_RMII_REFIN),
+ JH71X0_GMUX(JH7110_AONCLK_GMAC0_TX, "gmac0_tx", 0, 2,
+ JH7110_AONCLK_GMAC0_GTXCLK,
+ JH7110_AONCLK_GMAC0_RMII_RTX),
+ JH71X0__INV(JH7110_AONCLK_GMAC0_TX_INV, "gmac0_tx_inv",
+ JH7110_AONCLK_GMAC0_TX),
+ JH71X0__MUX(JH7110_AONCLK_GMAC0_RX, "gmac0_rx", 2,
+ JH7110_AONCLK_GMAC0_RGMII_RXIN,
+ JH7110_AONCLK_GMAC0_RMII_RTX),
+ JH71X0__INV(JH7110_AONCLK_GMAC0_RX_INV, "gmac0_rx_inv",
+ JH7110_AONCLK_GMAC0_RX),
+ /* otpc */
+ JH71X0_GATE(JH7110_AONCLK_OTPC_APB, "otpc_apb", CLK_IGNORE_UNUSED,
+ JH7110_AONCLK_APB_BUS_FUNC),
+ /* rtc */
+ JH71X0_GATE(JH7110_AONCLK_RTC_APB, "rtc_apb", CLK_IGNORE_UNUSED,
+ JH7110_AONCLK_APB_BUS_FUNC),
+ JH71X0__DIV(JH7110_AONCLK_RTC_INTERNAL, "rtc_internal", 1022,
+ JH7110_AONCLK_OSC),
+ JH71X0__MUX(JH7110_AONCLK_RTC_32K, "rtc_32k", 2,
+ JH7110_AONCLK_RTC,
+ JH7110_AONCLK_RTC_INTERNAL),
+ JH71X0_GATE(JH7110_AONCLK_RTC_CAL, "rtc_cal", 0,
+ JH7110_AONCLK_OSC),
+};
+
+static struct clk_hw *jh7110_aonclk_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct jh71x0_clk_priv *priv = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx < JH7110_AONCLK_END)
+ return &priv->reg[idx].hw;
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int jh7110_aoncrg_probe(struct platform_device *pdev)
+{
+ struct jh71x0_clk_priv *priv;
+ unsigned int idx;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev,
+ struct_size(priv, reg, JH7110_AONCLK_END),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->rmw_lock);
+ priv->dev = &pdev->dev;
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ dev_set_drvdata(priv->dev, priv->base);
+
+ for (idx = 0; idx < JH7110_AONCLK_END; idx++) {
+ u32 max = jh7110_aonclk_data[idx].max;
+ struct clk_parent_data parents[4] = {};
+ struct clk_init_data init = {
+ .name = jh7110_aonclk_data[idx].name,
+ .ops = starfive_jh71x0_clk_ops(max),
+ .parent_data = parents,
+ .num_parents = ((max & JH71X0_CLK_MUX_MASK)
+ >> JH71X0_CLK_MUX_SHIFT) + 1,
+ .flags = jh7110_aonclk_data[idx].flags,
+ };
+ struct jh71x0_clk *clk = &priv->reg[idx];
+ unsigned int i;
+
+ for (i = 0; i < init.num_parents; i++) {
+ unsigned int pidx = jh7110_aonclk_data[idx].parents[i];
+
+ if (pidx < JH7110_AONCLK_END)
+ parents[i].hw = &priv->reg[pidx].hw;
+ else if (pidx == JH7110_AONCLK_OSC)
+ parents[i].fw_name = "osc";
+ else if (pidx == JH7110_AONCLK_RTC)
+ parents[i].fw_name = "clk_rtc";
+ else if (pidx == JH7110_AONCLK_GMAC0_RMII_REFIN)
+ parents[i].fw_name = "gmac0_rmii_refin";
+ else if (pidx == JH7110_AONCLK_GMAC0_RGMII_RXIN)
+ parents[i].fw_name = "gmac0_rgmii_rxin";
+ else if (pidx == JH7110_AONCLK_STG_AXIAHB)
+ parents[i].fw_name = "stg_axiahb";
+ else if (pidx == JH7110_AONCLK_APB_BUS_FUNC)
+ parents[i].fw_name = "apb_bus_func";
+ else if (pidx == JH7110_AONCLK_GMAC0_GTXCLK)
+ parents[i].fw_name = "gmac0_gtxclk";
+ }
+
+ clk->hw.init = &init;
+ clk->idx = idx;
+ clk->max_div = max & JH71X0_CLK_DIV_MASK;
+
+ ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_of_clk_add_hw_provider(&pdev->dev, jh7110_aonclk_get, priv);
+ if (ret)
+ return ret;
+
+ return jh7110_reset_controller_register(priv, "reset-aon", 1);
+}
+
+static const struct of_device_id jh7110_aoncrg_match[] = {
+ { .compatible = "starfive,jh7110-aoncrg" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh7110_aoncrg_match);
+
+static struct platform_driver jh7110_aoncrg_driver = {
+ .probe = jh7110_aoncrg_probe,
+ .driver = {
+ .name = "clk-starfive-jh7110-aon",
+ .of_match_table = jh7110_aoncrg_match,
+ },
+};
+module_platform_driver(jh7110_aoncrg_driver);
+
+MODULE_AUTHOR("Emil Renner Berthing");
+MODULE_DESCRIPTION("StarFive JH7110 always-on clock driver");
+MODULE_LICENSE("GPL v2");
--
2.38.1
WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 12/14] clk: starfive: Add StarFive JH7110 always-on clock driver
Date: Fri, 18 Nov 2022 09:06:25 +0800 [thread overview]
Message-ID: <20221118010627.70576-13-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20221118010627.70576-1-hal.feng@starfivetech.com>
From: Emil Renner Berthing <kernel@esmil.dk>
Add driver for the StarFive JH7110 always-on clock controller
and register an auxiliary device for always-on reset controller
which is named as "reset-aon".
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/clk/starfive/Kconfig | 10 ++
drivers/clk/starfive/Makefile | 1 +
.../clk/starfive/clk-starfive-jh7110-aon.c | 165 ++++++++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 7a6ff6614c74..baa602d384b7 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -30,3 +30,13 @@ config CLK_STARFIVE_JH7110_SYS
help
Say yes here to support the system clock controller on the
StarFive JH7110 SoC.
+
+config CLK_STARFIVE_JH7110_AON
+ tristate "StarFive JH7110 always-on clock support"
+ depends on CLK_STARFIVE_JH7110_SYS
+ select AUXILIARY_BUS
+ select CLK_STARFIVE_JH71X0
+ default CLK_STARFIVE_JH7110_SYS
+ help
+ Say yes here to support the always-on clock controller on the
+ StarFive JH7110 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 5ca4e887fb9c..f3df7d957b1e 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7100) += clk-starfive-jh7100.o
obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO) += clk-starfive-jh7100-audio.o
obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS) += clk-starfive-jh7110-sys.o
+obj-$(CONFIG_CLK_STARFIVE_JH7110_AON) += clk-starfive-jh7110-aon.o
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-aon.c b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
new file mode 100644
index 000000000000..643728f9904a
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH7110 Always-On Clock Driver
+ *
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/starfive-jh7110.h>
+
+#include "clk-starfive-jh71x0.h"
+
+/* external clocks */
+#define JH7110_AONCLK_OSC (JH7110_AONCLK_END + 0)
+#define JH7110_AONCLK_RTC (JH7110_AONCLK_END + 1)
+#define JH7110_AONCLK_GMAC0_RMII_REFIN (JH7110_AONCLK_END + 2)
+#define JH7110_AONCLK_GMAC0_RGMII_RXIN (JH7110_AONCLK_END + 3)
+#define JH7110_AONCLK_STG_AXIAHB (JH7110_AONCLK_END + 4)
+#define JH7110_AONCLK_APB_BUS_FUNC (JH7110_AONCLK_END + 5)
+#define JH7110_AONCLK_GMAC0_GTXCLK (JH7110_AONCLK_END + 6)
+
+static const struct jh71x0_clk_data jh7110_aonclk_data[] = {
+ /* source */
+ JH71X0__DIV(JH7110_AONCLK_OSC_DIV4, "osc_div4", 4,
+ JH7110_AONCLK_OSC),
+ JH71X0__MUX(JH7110_AONCLK_APB_FUNC, "aon_apb_func", 2,
+ JH7110_AONCLK_OSC_DIV4,
+ JH7110_AONCLK_OSC),
+ /* gmac0 */
+ JH71X0_GATE(JH7110_AONCLK_GMAC0_AHB, "gmac0_ahb", 0,
+ JH7110_AONCLK_STG_AXIAHB),
+ JH71X0_GATE(JH7110_AONCLK_GMAC0_AXI, "gmac0_axi", 0,
+ JH7110_AONCLK_STG_AXIAHB),
+ JH71X0__DIV(JH7110_AONCLK_GMAC0_RMII_RTX, "gmac0_rmii_rtx", 30,
+ JH7110_AONCLK_GMAC0_RMII_REFIN),
+ JH71X0_GMUX(JH7110_AONCLK_GMAC0_TX, "gmac0_tx", 0, 2,
+ JH7110_AONCLK_GMAC0_GTXCLK,
+ JH7110_AONCLK_GMAC0_RMII_RTX),
+ JH71X0__INV(JH7110_AONCLK_GMAC0_TX_INV, "gmac0_tx_inv",
+ JH7110_AONCLK_GMAC0_TX),
+ JH71X0__MUX(JH7110_AONCLK_GMAC0_RX, "gmac0_rx", 2,
+ JH7110_AONCLK_GMAC0_RGMII_RXIN,
+ JH7110_AONCLK_GMAC0_RMII_RTX),
+ JH71X0__INV(JH7110_AONCLK_GMAC0_RX_INV, "gmac0_rx_inv",
+ JH7110_AONCLK_GMAC0_RX),
+ /* otpc */
+ JH71X0_GATE(JH7110_AONCLK_OTPC_APB, "otpc_apb", CLK_IGNORE_UNUSED,
+ JH7110_AONCLK_APB_BUS_FUNC),
+ /* rtc */
+ JH71X0_GATE(JH7110_AONCLK_RTC_APB, "rtc_apb", CLK_IGNORE_UNUSED,
+ JH7110_AONCLK_APB_BUS_FUNC),
+ JH71X0__DIV(JH7110_AONCLK_RTC_INTERNAL, "rtc_internal", 1022,
+ JH7110_AONCLK_OSC),
+ JH71X0__MUX(JH7110_AONCLK_RTC_32K, "rtc_32k", 2,
+ JH7110_AONCLK_RTC,
+ JH7110_AONCLK_RTC_INTERNAL),
+ JH71X0_GATE(JH7110_AONCLK_RTC_CAL, "rtc_cal", 0,
+ JH7110_AONCLK_OSC),
+};
+
+static struct clk_hw *jh7110_aonclk_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct jh71x0_clk_priv *priv = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx < JH7110_AONCLK_END)
+ return &priv->reg[idx].hw;
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int jh7110_aoncrg_probe(struct platform_device *pdev)
+{
+ struct jh71x0_clk_priv *priv;
+ unsigned int idx;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev,
+ struct_size(priv, reg, JH7110_AONCLK_END),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->rmw_lock);
+ priv->dev = &pdev->dev;
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ dev_set_drvdata(priv->dev, priv->base);
+
+ for (idx = 0; idx < JH7110_AONCLK_END; idx++) {
+ u32 max = jh7110_aonclk_data[idx].max;
+ struct clk_parent_data parents[4] = {};
+ struct clk_init_data init = {
+ .name = jh7110_aonclk_data[idx].name,
+ .ops = starfive_jh71x0_clk_ops(max),
+ .parent_data = parents,
+ .num_parents = ((max & JH71X0_CLK_MUX_MASK)
+ >> JH71X0_CLK_MUX_SHIFT) + 1,
+ .flags = jh7110_aonclk_data[idx].flags,
+ };
+ struct jh71x0_clk *clk = &priv->reg[idx];
+ unsigned int i;
+
+ for (i = 0; i < init.num_parents; i++) {
+ unsigned int pidx = jh7110_aonclk_data[idx].parents[i];
+
+ if (pidx < JH7110_AONCLK_END)
+ parents[i].hw = &priv->reg[pidx].hw;
+ else if (pidx == JH7110_AONCLK_OSC)
+ parents[i].fw_name = "osc";
+ else if (pidx == JH7110_AONCLK_RTC)
+ parents[i].fw_name = "clk_rtc";
+ else if (pidx == JH7110_AONCLK_GMAC0_RMII_REFIN)
+ parents[i].fw_name = "gmac0_rmii_refin";
+ else if (pidx == JH7110_AONCLK_GMAC0_RGMII_RXIN)
+ parents[i].fw_name = "gmac0_rgmii_rxin";
+ else if (pidx == JH7110_AONCLK_STG_AXIAHB)
+ parents[i].fw_name = "stg_axiahb";
+ else if (pidx == JH7110_AONCLK_APB_BUS_FUNC)
+ parents[i].fw_name = "apb_bus_func";
+ else if (pidx == JH7110_AONCLK_GMAC0_GTXCLK)
+ parents[i].fw_name = "gmac0_gtxclk";
+ }
+
+ clk->hw.init = &init;
+ clk->idx = idx;
+ clk->max_div = max & JH71X0_CLK_DIV_MASK;
+
+ ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_of_clk_add_hw_provider(&pdev->dev, jh7110_aonclk_get, priv);
+ if (ret)
+ return ret;
+
+ return jh7110_reset_controller_register(priv, "reset-aon", 1);
+}
+
+static const struct of_device_id jh7110_aoncrg_match[] = {
+ { .compatible = "starfive,jh7110-aoncrg" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh7110_aoncrg_match);
+
+static struct platform_driver jh7110_aoncrg_driver = {
+ .probe = jh7110_aoncrg_probe,
+ .driver = {
+ .name = "clk-starfive-jh7110-aon",
+ .of_match_table = jh7110_aoncrg_match,
+ },
+};
+module_platform_driver(jh7110_aoncrg_driver);
+
+MODULE_AUTHOR("Emil Renner Berthing");
+MODULE_DESCRIPTION("StarFive JH7110 always-on clock driver");
+MODULE_LICENSE("GPL v2");
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-11-18 1:44 UTC|newest]
Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 1:06 [PATCH v2 00/14] Basic clock and reset support for StarFive JH7110 RISC-V SoC Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 1:06 ` [PATCH v2 01/14] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 16:22 ` Emil Renner Berthing
2022-11-18 16:22 ` Emil Renner Berthing
2022-11-21 6:25 ` Hal Feng
2022-11-21 6:25 ` Hal Feng
2022-11-18 1:06 ` [PATCH v2 02/14] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 16:26 ` Emil Renner Berthing
2022-11-18 16:26 ` Emil Renner Berthing
2022-11-21 7:16 ` Hal Feng
2022-11-21 7:16 ` Hal Feng
2022-11-21 11:32 ` Emil Renner Berthing
2022-11-21 11:32 ` Emil Renner Berthing
2022-11-21 13:13 ` Hal Feng
2022-11-21 13:13 ` Hal Feng
2022-11-18 1:06 ` [PATCH v2 03/14] reset: Create subdirectory for StarFive drivers Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 16:29 ` Emil Renner Berthing
2022-11-18 16:29 ` Emil Renner Berthing
2022-11-18 1:06 ` [PATCH v2 04/14] reset: starfive: Factor out common JH71X0 reset code Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 16:39 ` Emil Renner Berthing
2022-11-18 16:39 ` Emil Renner Berthing
2022-11-21 9:23 ` Hal Feng
2022-11-21 9:23 ` Hal Feng
2022-11-21 11:26 ` Emil Renner Berthing
2022-11-21 11:26 ` Emil Renner Berthing
2022-11-18 1:06 ` [PATCH v2 05/14] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 1:06 ` [PATCH v2 06/14] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 1:06 ` [PATCH v2 07/14] dt-bindings: clock: Add StarFive JH7110 system and always-on clock definitions Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-21 8:45 ` Krzysztof Kozlowski
2022-11-21 8:45 ` Krzysztof Kozlowski
2022-11-22 1:02 ` Hal Feng
2022-11-22 1:02 ` Hal Feng
2022-11-22 7:41 ` Krzysztof Kozlowski
2022-11-22 7:41 ` Krzysztof Kozlowski
2022-11-22 8:04 ` Hal Feng
2022-11-22 8:04 ` Hal Feng
2022-11-23 9:34 ` Krzysztof Kozlowski
2022-11-23 9:34 ` Krzysztof Kozlowski
2022-11-18 1:06 ` [PATCH v2 08/14] dt-bindings: reset: Add StarFive JH7110 system and always-on reset definitions Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 16:47 ` Emil Renner Berthing
2022-11-18 16:47 ` Emil Renner Berthing
2022-11-22 1:20 ` Hal Feng
2022-11-22 1:20 ` Hal Feng
2022-11-21 8:45 ` Krzysztof Kozlowski
2022-11-21 8:45 ` Krzysztof Kozlowski
2022-11-21 8:50 ` Krzysztof Kozlowski
2022-11-21 8:50 ` Krzysztof Kozlowski
2022-11-22 1:26 ` Hal Feng
2022-11-22 1:26 ` Hal Feng
2022-11-18 1:06 ` [PATCH v2 09/14] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 16:50 ` Emil Renner Berthing
2022-11-18 16:50 ` Emil Renner Berthing
2022-11-21 8:47 ` Krzysztof Kozlowski
2022-11-21 8:47 ` Krzysztof Kozlowski
2022-11-22 1:45 ` Hal Feng
2022-11-22 1:45 ` Hal Feng
2022-11-21 8:47 ` Krzysztof Kozlowski
2022-11-21 8:47 ` Krzysztof Kozlowski
2022-11-25 6:41 ` Hal Feng
2022-11-25 6:41 ` Hal Feng
2022-11-30 9:47 ` Hal Feng
2022-11-30 9:47 ` Hal Feng
2022-11-30 11:48 ` Krzysztof Kozlowski
2022-11-30 11:48 ` Krzysztof Kozlowski
2022-11-30 15:12 ` Hal Feng
2022-11-30 15:12 ` Hal Feng
2022-11-30 15:19 ` Krzysztof Kozlowski
2022-11-30 15:19 ` Krzysztof Kozlowski
2022-11-30 18:05 ` Hal Feng
2022-11-30 18:05 ` Hal Feng
2022-12-01 10:21 ` Krzysztof Kozlowski
2022-12-01 10:21 ` Krzysztof Kozlowski
2022-12-02 2:06 ` Hal Feng
2022-12-02 2:06 ` Hal Feng
2022-11-18 1:06 ` [PATCH v2 10/14] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-21 8:49 ` Krzysztof Kozlowski
2022-11-21 8:49 ` Krzysztof Kozlowski
2022-11-21 11:38 ` Emil Renner Berthing
2022-11-21 11:38 ` Emil Renner Berthing
2022-11-21 13:24 ` Krzysztof Kozlowski
2022-11-21 13:24 ` Krzysztof Kozlowski
2022-11-18 1:06 ` [PATCH v2 11/14] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 17:03 ` Emil Renner Berthing
2022-11-18 17:03 ` Emil Renner Berthing
2022-11-25 2:33 ` Hal Feng
2022-11-25 2:33 ` Hal Feng
2022-11-18 1:06 ` Hal Feng [this message]
2022-11-18 1:06 ` [PATCH v2 12/14] clk: starfive: Add StarFive JH7110 always-on " Hal Feng
2022-11-18 1:06 ` [PATCH v2 13/14] reset: starfive: Add StarFive JH7110 reset driver Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 17:14 ` Emil Renner Berthing
2022-11-18 17:14 ` Emil Renner Berthing
2022-11-22 5:55 ` Hal Feng
2022-11-22 5:55 ` Hal Feng
2022-11-18 1:06 ` [PATCH v2 14/14] clk: starfive: jh71x0: Don't register aux devices if JH7110 reset is disabled Hal Feng
2022-11-18 1:06 ` Hal Feng
2022-11-18 17:18 ` Emil Renner Berthing
2022-11-18 17:18 ` Emil Renner Berthing
2022-11-22 6:12 ` Hal Feng
2022-11-22 6:12 ` Hal Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221118010627.70576-13-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.