From: Tomer Maimon <tmaimon77@gmail.com>
To: <avifishman70@gmail.com>, <tali.perry1@gmail.com>,
<joel@jms.id.au>, <venture@google.com>, <yuenn@google.com>,
<benjaminfair@google.com>, <arnd@arndb.de>,
<hasegawa-hitomi@fujitsu.com>, <marcan@marcan.st>,
<nicolas.ferre@microchip.com>, <conor.dooley@microchip.com>,
<heiko@sntech.de>, <sven@svenpeter.dev>,
<briannorris@chromium.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org, openbmc@lists.ozlabs.org,
linux-kernel@vger.kernel.org, Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v1 0/2] soc: add NPCM LPC BPC driver support
Date: Tue, 22 Nov 2022 22:12:30 +0200 [thread overview]
Message-ID: <20221122201232.107065-1-tmaimon77@gmail.com> (raw)
This patch set adds LPC BIOS Post code (BPC) support for the
Nuvoton NPCM Baseboard Management Controller (BMC).
Nuvoton BMC NPCM LPC BIOS Post Code (BPC) monitoring two
configurable I/O addresses written by the host on the
Low Pin Count (LPC) bus, the capture data stored in 128-word FIFO.
NPCM BPC can support capture double words.
The NPCM LPC BPC driver tested on NPCM750 Olympus board and NPCM845 EVB.
Tomer Maimon (2):
dt-binding: soc: nuvoton: Add NPCM BPC LPC documentation
soc: nuvoton: add NPCM LPC BPC driver
.../bindings/soc/nuvoton/npcm-lpc-bpc.yaml | 112 +++++
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/nuvoton/Kconfig | 24 ++
drivers/soc/nuvoton/Makefile | 3 +
drivers/soc/nuvoton/npcm-lpc-bpc.c | 396 ++++++++++++++++++
6 files changed, 537 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/nuvoton/npcm-lpc-bpc.yaml
create mode 100644 drivers/soc/nuvoton/Kconfig
create mode 100644 drivers/soc/nuvoton/Makefile
create mode 100644 drivers/soc/nuvoton/npcm-lpc-bpc.c
--
2.33.0
WARNING: multiple messages have this Message-ID (diff)
From: Tomer Maimon <tmaimon77@gmail.com>
To: <avifishman70@gmail.com>, <tali.perry1@gmail.com>,
<joel@jms.id.au>, <venture@google.com>, <yuenn@google.com>,
<benjaminfair@google.com>, <arnd@arndb.de>,
<hasegawa-hitomi@fujitsu.com>, <marcan@marcan.st>,
<nicolas.ferre@microchip.com>, <conor.dooley@microchip.com>,
<heiko@sntech.de>, <sven@svenpeter.dev>,
<briannorris@chromium.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <openbmc@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v1 0/2] soc: add NPCM LPC BPC driver support
Date: Tue, 22 Nov 2022 22:12:30 +0200 [thread overview]
Message-ID: <20221122201232.107065-1-tmaimon77@gmail.com> (raw)
This patch set adds LPC BIOS Post code (BPC) support for the
Nuvoton NPCM Baseboard Management Controller (BMC).
Nuvoton BMC NPCM LPC BIOS Post Code (BPC) monitoring two
configurable I/O addresses written by the host on the
Low Pin Count (LPC) bus, the capture data stored in 128-word FIFO.
NPCM BPC can support capture double words.
The NPCM LPC BPC driver tested on NPCM750 Olympus board and NPCM845 EVB.
Tomer Maimon (2):
dt-binding: soc: nuvoton: Add NPCM BPC LPC documentation
soc: nuvoton: add NPCM LPC BPC driver
.../bindings/soc/nuvoton/npcm-lpc-bpc.yaml | 112 +++++
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/nuvoton/Kconfig | 24 ++
drivers/soc/nuvoton/Makefile | 3 +
drivers/soc/nuvoton/npcm-lpc-bpc.c | 396 ++++++++++++++++++
6 files changed, 537 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/nuvoton/npcm-lpc-bpc.yaml
create mode 100644 drivers/soc/nuvoton/Kconfig
create mode 100644 drivers/soc/nuvoton/Makefile
create mode 100644 drivers/soc/nuvoton/npcm-lpc-bpc.c
--
2.33.0
next reply other threads:[~2022-11-22 20:13 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-22 20:12 Tomer Maimon [this message]
2022-11-22 20:12 ` [PATCH v1 0/2] soc: add NPCM LPC BPC driver support Tomer Maimon
2022-11-22 20:12 ` [PATCH v1 1/2] dt-binding: soc: nuvoton: Add NPCM BPC LPC documentation Tomer Maimon
2022-11-22 20:12 ` Tomer Maimon
2022-11-23 10:03 ` Krzysztof Kozlowski
2022-11-24 15:38 ` Tomer Maimon
2022-11-24 15:38 ` Tomer Maimon
2022-11-24 16:18 ` Krzysztof Kozlowski
2022-11-29 16:44 ` Tomer Maimon
2022-11-29 16:44 ` Tomer Maimon
2022-11-30 8:27 ` Krzysztof Kozlowski
2022-11-30 10:31 ` Tomer Maimon
2022-11-30 10:31 ` Tomer Maimon
2022-11-30 19:30 ` Rob Herring
2022-11-30 19:30 ` Rob Herring
2022-11-22 20:12 ` [PATCH v1 2/2] soc: nuvoton: add NPCM LPC BPC driver Tomer Maimon
2022-11-22 20:12 ` Tomer Maimon
2022-11-23 10:57 ` Arnd Bergmann
2022-11-23 10:57 ` Arnd Bergmann
2022-11-23 18:01 ` Tomer Maimon
2022-11-23 18:01 ` Tomer Maimon
2022-11-25 10:25 ` Arnd Bergmann
2022-11-25 10:25 ` Arnd Bergmann
2022-11-29 18:20 ` Tomer Maimon
2022-11-29 18:20 ` Tomer Maimon
2022-11-25 2:27 ` kernel test robot
2022-11-25 2:27 ` kernel test robot
-- strict thread matches above, loose matches on Subject: below --
2019-06-10 13:32 [PATCH v1 0/2] soc: add NPCM LPC BPC driver support Tomer Maimon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221122201232.107065-1-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=briannorris@chromium.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=hasegawa-hitomi@fujitsu.com \
--cc=heiko@sntech.de \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=nicolas.ferre@microchip.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=sven@svenpeter.dev \
--cc=tali.perry1@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.