* [PATCH v3 0/2] Support new features to the SPEAr600 @ 2022-11-15 13:58 ` Köry Maincent 0 siblings, 0 replies; 10+ messages in thread From: Köry Maincent @ 2022-11-15 13:58 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc From: Kory Maincent <kory.maincent@bootlin.com> This patches series adds two features of the SPEAr600 SOC: - Enable the display controller - Enable the SPI buses using the SSP controller Changes in v2: - Keep the I2C_CONFIG in the spear6xx_defconfig while enabling DRM. - Send cover letter which was not sent in v1 due to a mistake in my git mail config. The arm patches have been merged thanks to Arnd. Could you deal with the clock patches to merged them through the clock tree? Kory Maincent (2): clk: spear: Fix CLCD clock definition on SPEAr600 clk: spear: Fix SSP clock definition on SPEAr600 drivers/clk/spear/spear6xx_clock.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) -- 2.25.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 0/2] Support new features to the SPEAr600 @ 2022-11-15 13:58 ` Köry Maincent 0 siblings, 0 replies; 10+ messages in thread From: Köry Maincent @ 2022-11-15 13:58 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc From: Kory Maincent <kory.maincent@bootlin.com> This patches series adds two features of the SPEAr600 SOC: - Enable the display controller - Enable the SPI buses using the SSP controller Changes in v2: - Keep the I2C_CONFIG in the spear6xx_defconfig while enabling DRM. - Send cover letter which was not sent in v1 due to a mistake in my git mail config. The arm patches have been merged thanks to Arnd. Could you deal with the clock patches to merged them through the clock tree? Kory Maincent (2): clk: spear: Fix CLCD clock definition on SPEAr600 clk: spear: Fix SSP clock definition on SPEAr600 drivers/clk/spear/spear6xx_clock.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 1/2] clk: spear: Fix CLCD clock definition on SPEAr600 2022-11-15 13:58 ` Köry Maincent @ 2022-11-15 13:58 ` Köry Maincent -1 siblings, 0 replies; 10+ messages in thread From: Köry Maincent @ 2022-11-15 13:58 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, Viresh Kumar, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc From: Kory Maincent <kory.maincent@bootlin.com> There is no SPEAr600 device named "clcd". Instead, the description of the CLCD (color liquid crystal display controller) name is "fc200000.clcd", so we should associate the CLCD gateable clock to this device name. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/clk/spear/spear6xx_clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index c192a9141b86..ee0ed89f2954 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -207,7 +207,7 @@ void __init spear6xx_clk_init(void __iomem *misc_base) clk = clk_register_gate(NULL, "clcd_clk", "clcd_mclk", 0, PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "clcd"); + clk_register_clkdev(clk, NULL, "fc200000.clcd"); /* gpt clocks */ clk = clk_register_gpt("gpt0_1_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, -- 2.25.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3 1/2] clk: spear: Fix CLCD clock definition on SPEAr600 @ 2022-11-15 13:58 ` Köry Maincent 0 siblings, 0 replies; 10+ messages in thread From: Köry Maincent @ 2022-11-15 13:58 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, Viresh Kumar, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc From: Kory Maincent <kory.maincent@bootlin.com> There is no SPEAr600 device named "clcd". Instead, the description of the CLCD (color liquid crystal display controller) name is "fc200000.clcd", so we should associate the CLCD gateable clock to this device name. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/clk/spear/spear6xx_clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index c192a9141b86..ee0ed89f2954 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -207,7 +207,7 @@ void __init spear6xx_clk_init(void __iomem *misc_base) clk = clk_register_gate(NULL, "clcd_clk", "clcd_mclk", 0, PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "clcd"); + clk_register_clkdev(clk, NULL, "fc200000.clcd"); /* gpt clocks */ clk = clk_register_gpt("gpt0_1_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] clk: spear: Fix CLCD clock definition on SPEAr600 2022-11-15 13:58 ` Köry Maincent @ 2022-11-23 2:04 ` Stephen Boyd -1 siblings, 0 replies; 10+ messages in thread From: Stephen Boyd @ 2022-11-23 2:04 UTC (permalink / raw) To: Köry Maincent, Michael Turquette, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, Viresh Kumar, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc Quoting Köry Maincent (2022-11-15 05:58:12) > From: Kory Maincent <kory.maincent@bootlin.com> > > There is no SPEAr600 device named "clcd". Instead, the description of the > CLCD (color liquid crystal display controller) name is "fc200000.clcd", so > we should associate the CLCD gateable clock to this device name. > > Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > --- Applied to clk-next ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/2] clk: spear: Fix CLCD clock definition on SPEAr600 @ 2022-11-23 2:04 ` Stephen Boyd 0 siblings, 0 replies; 10+ messages in thread From: Stephen Boyd @ 2022-11-23 2:04 UTC (permalink / raw) To: Köry Maincent, Michael Turquette, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, Viresh Kumar, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc Quoting Köry Maincent (2022-11-15 05:58:12) > From: Kory Maincent <kory.maincent@bootlin.com> > > There is no SPEAr600 device named "clcd". Instead, the description of the > CLCD (color liquid crystal display controller) name is "fc200000.clcd", so > we should associate the CLCD gateable clock to this device name. > > Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > --- Applied to clk-next _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 2/2] clk: spear: Fix SSP clock definition on SPEAr600 2022-11-15 13:58 ` Köry Maincent @ 2022-11-15 13:58 ` Köry Maincent -1 siblings, 0 replies; 10+ messages in thread From: Köry Maincent @ 2022-11-15 13:58 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, Viresh Kumar, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc From: Kory Maincent <kory.maincent@bootlin.com> There is no SPEAr600 device named "ssp-pl022.x". Instead, the description of the SSP (Synchronous Serial Port) was recently added to the Device Tree, and the device name is "xxx.spi", so we should associate the SSP gateable clock to these device names. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/clk/spear/spear6xx_clock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index ee0ed89f2954..adfa118520c3 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -326,13 +326,13 @@ void __init spear6xx_clk_init(void __iomem *misc_base) clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB, SSP0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "ssp-pl022.0"); + clk_register_clkdev(clk, NULL, "d0100000.spi"); clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB, SSP1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "ssp-pl022.1"); + clk_register_clkdev(clk, NULL, "d0180000.spi"); clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB, SSP2_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "ssp-pl022.2"); + clk_register_clkdev(clk, NULL, "d8180000.spi"); } -- 2.25.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3 2/2] clk: spear: Fix SSP clock definition on SPEAr600 @ 2022-11-15 13:58 ` Köry Maincent 0 siblings, 0 replies; 10+ messages in thread From: Köry Maincent @ 2022-11-15 13:58 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, Viresh Kumar, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc From: Kory Maincent <kory.maincent@bootlin.com> There is no SPEAr600 device named "ssp-pl022.x". Instead, the description of the SSP (Synchronous Serial Port) was recently added to the Device Tree, and the device name is "xxx.spi", so we should associate the SSP gateable clock to these device names. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/clk/spear/spear6xx_clock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index ee0ed89f2954..adfa118520c3 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -326,13 +326,13 @@ void __init spear6xx_clk_init(void __iomem *misc_base) clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB, SSP0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "ssp-pl022.0"); + clk_register_clkdev(clk, NULL, "d0100000.spi"); clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB, SSP1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "ssp-pl022.1"); + clk_register_clkdev(clk, NULL, "d0180000.spi"); clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB, SSP2_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "ssp-pl022.2"); + clk_register_clkdev(clk, NULL, "d8180000.spi"); } -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v3 2/2] clk: spear: Fix SSP clock definition on SPEAr600 2022-11-15 13:58 ` Köry Maincent @ 2022-11-23 2:04 ` Stephen Boyd -1 siblings, 0 replies; 10+ messages in thread From: Stephen Boyd @ 2022-11-23 2:04 UTC (permalink / raw) To: Köry Maincent, Michael Turquette, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, Viresh Kumar, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc Quoting Köry Maincent (2022-11-15 05:58:13) > From: Kory Maincent <kory.maincent@bootlin.com> > > There is no SPEAr600 device named "ssp-pl022.x". Instead, the description > of the SSP (Synchronous Serial Port) was recently added to the Device Tree, > and the device name is "xxx.spi", so we should associate the SSP gateable > clock to these device names. > > Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > --- Applied to clk-next ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 2/2] clk: spear: Fix SSP clock definition on SPEAr600 @ 2022-11-23 2:04 ` Stephen Boyd 0 siblings, 0 replies; 10+ messages in thread From: Stephen Boyd @ 2022-11-23 2:04 UTC (permalink / raw) To: Köry Maincent, Michael Turquette, linux-arm-kernel, linux-clk, linux-kernel Cc: Arnd Bergmann, Kory Maincent, Viresh Kumar, thomas.petazzoni, Viresh Kumar, Shiraz Hashim, soc Quoting Köry Maincent (2022-11-15 05:58:13) > From: Kory Maincent <kory.maincent@bootlin.com> > > There is no SPEAr600 device named "ssp-pl022.x". Instead, the description > of the SSP (Synchronous Serial Port) was recently added to the Device Tree, > and the device name is "xxx.spi", so we should associate the SSP gateable > clock to these device names. > > Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > --- Applied to clk-next _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2022-11-23 2:05 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-11-15 13:58 [PATCH v3 0/2] Support new features to the SPEAr600 Köry Maincent 2022-11-15 13:58 ` Köry Maincent 2022-11-15 13:58 ` [PATCH v3 1/2] clk: spear: Fix CLCD clock definition on SPEAr600 Köry Maincent 2022-11-15 13:58 ` Köry Maincent 2022-11-23 2:04 ` Stephen Boyd 2022-11-23 2:04 ` Stephen Boyd 2022-11-15 13:58 ` [PATCH v3 2/2] clk: spear: Fix SSP " Köry Maincent 2022-11-15 13:58 ` Köry Maincent 2022-11-23 2:04 ` Stephen Boyd 2022-11-23 2:04 ` Stephen Boyd
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.