From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Jordan Niethe <jniethe5@gmail.com>,
Laurent Dufour <ldufour@linux.ibm.com>,
Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 13/17] powerpc/qspinlock: use spin_begin/end API
Date: Sat, 26 Nov 2022 19:59:28 +1000 [thread overview]
Message-ID: <20221126095932.1234527-14-npiggin@gmail.com> (raw)
In-Reply-To: <20221126095932.1234527-1-npiggin@gmail.com>
Use the spin_begin/spin_cpu_relax/spin_end APIs in qspinlock, which helps
to prevent threads issuing a lot of expensive priority nops which may not
have much effect due to immediately executing low then medium priority.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/lib/qspinlock.c | 39 ++++++++++++++++++++++++++++++++----
1 file changed, 35 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/lib/qspinlock.c b/arch/powerpc/lib/qspinlock.c
index 1cb47a6478a0..70f924296b36 100644
--- a/arch/powerpc/lib/qspinlock.c
+++ b/arch/powerpc/lib/qspinlock.c
@@ -184,6 +184,7 @@ static struct qnode *get_tail_qnode(struct qspinlock *lock, u32 val)
BUG();
}
+/* Called inside spin_begin() */
static __always_inline void __yield_to_locked_owner(struct qspinlock *lock, u32 val, bool paravirt, bool mustq)
{
int owner;
@@ -203,6 +204,8 @@ static __always_inline void __yield_to_locked_owner(struct qspinlock *lock, u32
if ((yield_count & 1) == 0)
goto relax; /* owner vcpu is running */
+ spin_end();
+
/*
* Read the lock word after sampling the yield count. On the other side
* there may a wmb because the yield count update is done by the
@@ -218,18 +221,22 @@ static __always_inline void __yield_to_locked_owner(struct qspinlock *lock, u32
yield_to_preempted(owner, yield_count);
if (mustq)
set_mustq(lock);
+ spin_begin();
/* Don't relax if we yielded. Maybe we should? */
return;
}
+ spin_begin();
relax:
- cpu_relax();
+ spin_cpu_relax();
}
+/* Called inside spin_begin() */
static __always_inline void yield_to_locked_owner(struct qspinlock *lock, u32 val, bool paravirt)
{
__yield_to_locked_owner(lock, val, paravirt, false);
}
+/* Called inside spin_begin() */
static __always_inline void yield_head_to_locked_owner(struct qspinlock *lock, u32 val, bool paravirt)
{
bool mustq = false;
@@ -267,6 +274,7 @@ static __always_inline void propagate_yield_cpu(struct qnode *node, u32 val, int
}
}
+/* Called inside spin_begin() */
static __always_inline void yield_to_prev(struct qspinlock *lock, struct qnode *node, u32 val, bool paravirt)
{
int prev_cpu = decode_tail_cpu(val);
@@ -291,14 +299,18 @@ static __always_inline void yield_to_prev(struct qspinlock *lock, struct qnode *
if ((yield_count & 1) == 0)
goto yield_prev; /* owner vcpu is running */
+ spin_end();
+
smp_rmb();
if (yield_cpu == node->yield_cpu) {
if (node->next && node->next->yield_cpu != yield_cpu)
node->next->yield_cpu = yield_cpu;
yield_to_preempted(yield_cpu, yield_count);
+ spin_begin();
return;
}
+ spin_begin();
yield_prev:
if (!pv_yield_prev)
@@ -308,15 +320,19 @@ static __always_inline void yield_to_prev(struct qspinlock *lock, struct qnode *
if ((yield_count & 1) == 0)
goto relax; /* owner vcpu is running */
+ spin_end();
+
smp_rmb(); /* See __yield_to_locked_owner comment */
if (!node->locked) {
yield_to_preempted(prev_cpu, yield_count);
+ spin_begin();
return;
}
+ spin_begin();
relax:
- cpu_relax();
+ spin_cpu_relax();
}
@@ -328,6 +344,8 @@ static __always_inline bool try_to_steal_lock(struct qspinlock *lock, bool parav
return false;
/* Attempt to steal the lock */
+ spin_begin();
+
do {
u32 val = READ_ONCE(lock->val);
@@ -335,8 +353,10 @@ static __always_inline bool try_to_steal_lock(struct qspinlock *lock, bool parav
break;
if (unlikely(!(val & _Q_LOCKED_VAL))) {
+ spin_end();
if (__queued_spin_trylock_steal(lock))
return true;
+ spin_begin();
} else {
yield_to_locked_owner(lock, val, paravirt);
}
@@ -344,6 +364,8 @@ static __always_inline bool try_to_steal_lock(struct qspinlock *lock, bool parav
iters++;
} while (iters < get_steal_spins(paravirt));
+ spin_end();
+
return false;
}
@@ -395,8 +417,10 @@ static __always_inline void queued_spin_lock_mcs_queue(struct qspinlock *lock, b
WRITE_ONCE(prev->next, node);
/* Wait for mcs node lock to be released */
+ spin_begin();
while (!node->locked)
yield_to_prev(lock, node, old, paravirt);
+ spin_end();
/* Clear out stale propagated yield_cpu */
if (paravirt && pv_yield_propagate_owner && node->yield_cpu != -1)
@@ -407,6 +431,7 @@ static __always_inline void queued_spin_lock_mcs_queue(struct qspinlock *lock, b
again:
/* We're at the head of the waitqueue, wait for the lock. */
+ spin_begin();
for (;;) {
val = READ_ONCE(lock->val);
if (!(val & _Q_LOCKED_VAL))
@@ -424,6 +449,7 @@ static __always_inline void queued_spin_lock_mcs_queue(struct qspinlock *lock, b
val |= _Q_MUST_Q_VAL;
}
}
+ spin_end();
/* If we're the last queued, must clean up the tail. */
old = trylock_clean_tail(lock, tail);
@@ -436,8 +462,13 @@ static __always_inline void queued_spin_lock_mcs_queue(struct qspinlock *lock, b
goto release; /* We were the tail, no next. */
/* There is a next, must wait for node->next != NULL (MCS protocol) */
- while (!(next = READ_ONCE(node->next)))
- cpu_relax();
+ next = READ_ONCE(node->next);
+ if (!next) {
+ spin_begin();
+ while (!(next = READ_ONCE(node->next)))
+ cpu_relax();
+ spin_end();
+ }
/*
* Unlock the next mcs waiter node. Release barrier is not required
--
2.37.2
next prev parent reply other threads:[~2022-11-26 10:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-26 9:59 [PATCH v3 00/17] powerpc: alternate queued spinlock implementation Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 01/17] powerpc/qspinlock: add mcs queueing for contended waiters Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 02/17] powerpc/qspinlock: use a half-word store to unlock to avoid larx/stcx Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 03/17] powerpc/qspinlock: convert atomic operations to assembly Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 04/17] powerpc/qspinlock: allow new waiters to steal the lock before queueing Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 05/17] powerpc/qspinlock: theft prevention to control latency Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 06/17] powerpc/qspinlock: store owner CPU in lock word Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 07/17] powerpc/qspinlock: paravirt yield to lock owner Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 08/17] powerpc/qspinlock: implement option to yield to previous node Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 09/17] powerpc/qspinlock: allow stealing when head of queue yields Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 10/17] powerpc/qspinlock: allow propagation of yield CPU down the queue Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 11/17] powerpc/qspinlock: add ability to prod new queue head CPU Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 12/17] powerpc/qspinlock: allow lock stealing in trylock and lock fastpath Nicholas Piggin
2022-11-26 9:59 ` Nicholas Piggin [this message]
2022-11-26 9:59 ` [PATCH v3 14/17] powerpc/qspinlock: reduce remote node steal spins Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 15/17] powerpc/qspinlock: allow indefinite spinning on a preempted owner Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 16/17] powerpc/qspinlock: provide accounting and options for sleepy locks Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 17/17] powerpc/qspinlock: add compile-time tuning adjustments Nicholas Piggin
2022-11-28 3:11 ` [PATCH v3 real 01/17] powerpc/qspinlock: powerpc qspinlock implementation Nicholas Piggin
2022-12-08 12:39 ` (subset) [PATCH v3 00/17] powerpc: alternate queued spinlock implementation Michael Ellerman
2023-04-13 10:58 ` Shrikanth Hegde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221126095932.1234527-14-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=jniethe5@gmail.com \
--cc=ldufour@linux.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.