From: Jisheng Zhang <jszhang@kernel.org>
To: "Rob Herring" <robh+dt@kernel.org>,
"Conor Dooley" <conor@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Subject: [PATCH v2 6/9] riscv: dts: bouffalolab: add the bl808 SoC base device tree
Date: Sun, 27 Nov 2022 21:24:45 +0800 [thread overview]
Message-ID: <20221127132448.4034-7-jszhang@kernel.org> (raw)
In-Reply-To: <20221127132448.4034-1-jszhang@kernel.org>
Add a baisc dtsi for the bouffalolab bl808 SoC.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
arch/riscv/boot/dts/bouffalolab/bl808.dtsi | 74 ++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808.dtsi
diff --git a/arch/riscv/boot/dts/bouffalolab/bl808.dtsi b/arch/riscv/boot/dts/bouffalolab/bl808.dtsi
new file mode 100644
index 000000000000..f4b170ccc32e
--- /dev/null
+++ b/arch/riscv/boot/dts/bouffalolab/bl808.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "bouffalolab,bl808";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ timebase-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "thead,c906", "riscv";
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <256>;
+ d-cache-size = <32768>;
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ mmu-type = "riscv,sv39";
+ riscv,isa = "rv64imafdc";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&plic>;
+ dma-noncoherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@30002000 {
+ compatible = "bouffalolab,bl808-uart";
+ reg = <0x30002000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ plic: interrupt-controller@e0000000 {
+ compatible = "thead,c900-plic";
+ reg = <0xe0000000 0x4000000>;
+ interrupts-extended = <&cpu0_intc 0xffffffff>,
+ <&cpu0_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ riscv,ndev = <64>;
+ };
+ };
+};
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org>
To: "Rob Herring" <robh+dt@kernel.org>,
"Conor Dooley" <conor@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Subject: [PATCH v2 6/9] riscv: dts: bouffalolab: add the bl808 SoC base device tree
Date: Sun, 27 Nov 2022 21:24:45 +0800 [thread overview]
Message-ID: <20221127132448.4034-7-jszhang@kernel.org> (raw)
In-Reply-To: <20221127132448.4034-1-jszhang@kernel.org>
Add a baisc dtsi for the bouffalolab bl808 SoC.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
arch/riscv/boot/dts/bouffalolab/bl808.dtsi | 74 ++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808.dtsi
diff --git a/arch/riscv/boot/dts/bouffalolab/bl808.dtsi b/arch/riscv/boot/dts/bouffalolab/bl808.dtsi
new file mode 100644
index 000000000000..f4b170ccc32e
--- /dev/null
+++ b/arch/riscv/boot/dts/bouffalolab/bl808.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "bouffalolab,bl808";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ timebase-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "thead,c906", "riscv";
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <256>;
+ d-cache-size = <32768>;
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ mmu-type = "riscv,sv39";
+ riscv,isa = "rv64imafdc";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&plic>;
+ dma-noncoherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@30002000 {
+ compatible = "bouffalolab,bl808-uart";
+ reg = <0x30002000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ plic: interrupt-controller@e0000000 {
+ compatible = "thead,c900-plic";
+ reg = <0xe0000000 0x4000000>;
+ interrupts-extended = <&cpu0_intc 0xffffffff>,
+ <&cpu0_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ riscv,ndev = <64>;
+ };
+ };
+};
--
2.38.1
next prev parent reply other threads:[~2022-11-27 13:35 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-27 13:24 [PATCH v2 0/9] riscv: add Bouffalolab bl808 support Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-27 13:24 ` [PATCH v2 1/9] dt-bindings: serial: add documentation for Bouffalolab UART Driver Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-30 5:45 ` Samuel Holland
2022-11-30 5:45 ` Samuel Holland
2022-12-01 11:02 ` Krzysztof Kozlowski
2022-12-01 11:02 ` Krzysztof Kozlowski
2022-11-27 13:24 ` [PATCH v2 2/9] serial: bflb_uart: add " Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-28 6:10 ` Jiri Slaby
2022-11-28 6:10 ` Jiri Slaby
2022-11-28 14:21 ` Jisheng Zhang
2022-11-28 14:21 ` Jisheng Zhang
2022-11-28 16:01 ` Ilpo Järvinen
2022-11-28 16:01 ` Ilpo Järvinen
2022-11-28 23:20 ` Jisheng Zhang
2022-11-28 23:20 ` Jisheng Zhang
2022-11-29 6:32 ` Jiri Slaby
2022-11-29 6:32 ` Jiri Slaby
2022-12-05 20:03 ` kernel test robot
2022-12-05 20:03 ` kernel test robot
2022-11-27 13:24 ` [PATCH v2 3/9] riscv: add the Bouffalolab SoC family Kconfig option Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-30 6:48 ` Samuel Holland
2022-11-30 6:48 ` Samuel Holland
2022-11-27 13:24 ` [PATCH v2 4/9] dt-bindings: vendor-prefixes: add bouffalolab Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-27 17:23 ` Conor Dooley
2022-11-27 17:23 ` Conor Dooley
2022-12-01 11:03 ` Krzysztof Kozlowski
2022-12-01 11:03 ` Krzysztof Kozlowski
2022-11-27 13:24 ` [PATCH v2 5/9] dt-bindings: riscv: Add bouffalolab bl808 board compatibles Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-27 16:25 ` Rob Herring
2022-11-27 16:25 ` Rob Herring
2022-11-27 17:29 ` Conor Dooley
2022-11-27 17:29 ` Conor Dooley
2022-12-01 11:05 ` Krzysztof Kozlowski
2022-12-01 11:05 ` Krzysztof Kozlowski
2022-12-01 11:14 ` Conor Dooley
2022-12-01 11:14 ` Conor Dooley
2022-12-01 11:41 ` Krzysztof Kozlowski
2022-12-01 11:41 ` Krzysztof Kozlowski
2022-11-27 13:24 ` Jisheng Zhang [this message]
2022-11-27 13:24 ` [PATCH v2 6/9] riscv: dts: bouffalolab: add the bl808 SoC base device tree Jisheng Zhang
2022-11-27 17:21 ` Conor Dooley
2022-11-27 17:21 ` Conor Dooley
2022-11-28 9:52 ` Icenowy Zheng
2022-11-28 9:52 ` Icenowy Zheng
2022-11-28 14:52 ` Conor Dooley
2022-11-28 14:52 ` Conor Dooley
2022-11-30 7:21 ` Samuel Holland
2022-11-30 7:21 ` Samuel Holland
2022-12-05 8:17 ` Icenowy Zheng
2022-12-05 8:17 ` Icenowy Zheng
2022-12-05 10:29 ` Conor Dooley
2022-12-05 10:29 ` Conor Dooley
2023-01-04 8:32 ` Michael Walle
2023-01-04 8:32 ` Michael Walle
2022-11-27 13:24 ` [PATCH v2 7/9] riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-27 17:32 ` Conor Dooley
2022-11-27 17:32 ` Conor Dooley
2022-11-30 7:25 ` Samuel Holland
2022-11-30 7:25 ` Samuel Holland
2022-12-05 8:15 ` Icenowy Zheng
2022-12-05 8:15 ` Icenowy Zheng
2022-11-27 13:24 ` [PATCH v2 8/9] MAINTAINERS: riscv: add entry for Bouffalolab SoC Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-27 17:35 ` Conor Dooley
2022-11-27 17:35 ` Conor Dooley
2022-11-27 17:36 ` Conor Dooley
2022-11-27 17:36 ` Conor Dooley
2022-11-28 14:30 ` Jisheng Zhang
2022-11-28 14:30 ` Jisheng Zhang
2022-11-28 14:34 ` Jisheng Zhang
2022-11-28 14:34 ` Jisheng Zhang
2022-11-28 14:50 ` Conor Dooley
2022-11-28 14:50 ` Conor Dooley
2022-11-30 7:27 ` Samuel Holland
2022-11-30 7:27 ` Samuel Holland
2022-11-27 13:24 ` [PATCH v2 9/9] riscv: defconfig: enable BOUFFALOLAB SoC Jisheng Zhang
2022-11-27 13:24 ` Jisheng Zhang
2022-11-27 17:36 ` Conor Dooley
2022-11-27 17:36 ` Conor Dooley
2022-12-02 17:54 ` [PATCH v2 0/9] riscv: add Bouffalolab bl808 support Palmer Dabbelt
2022-12-02 17:54 ` Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221127132448.4034-7-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jirislaby@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.