All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: "Michael Walle" <michael@walle.cc>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Shawn Guo" <shawnguo@kernel.org>,
	linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, u-boot@lists.denx.de,
	"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH V2 2/2] nvmem: u-boot-env: reformat MAC in "ethaddr" cell when reading
Date: Mon, 28 Nov 2022 07:59:23 +0100	[thread overview]
Message-ID: <20221128065923.1180-2-zajec5@gmail.com> (raw)
In-Reply-To: <20221128065923.1180-1-zajec5@gmail.com>

From: Rafał Miłecki <rafal@milecki.pl>

NVMEM consumers expect MAC in a byte-based format (see e.g.
nvmem_get_mac_address()). U-Boot environment data stores all values in
ASCII form.

Add post processing callback detecting "ethaddr" reads and reformat data
as expected. This fixes Ethernet drivers reading MAC from NVMEM devices.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: select GENERIC_NET_UTILS & drop unused "priv" variable
---
 drivers/nvmem/Kconfig      |  1 +
 drivers/nvmem/u-boot-env.c | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 755f551426b5..34fb0ba36b80 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -326,6 +326,7 @@ config NVMEM_U_BOOT_ENV
 	tristate "U-Boot environment variables support"
 	depends on OF && MTD
 	select CRC32
+	select GENERIC_NET_UTILS
 	help
 	  U-Boot stores its setup as environment variables. This driver adds
 	  support for verifying & exporting such data. It also exposes variables
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index 2a87dda45188..e30ce4f7ea20 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -4,6 +4,8 @@
  */
 
 #include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
@@ -70,6 +72,22 @@ static int u_boot_env_read(void *context, unsigned int offset, void *val,
 	return 0;
 }
 
+static int u_boot_env_cell_post_process(void *context, struct nvmem_cell_entry *cell,
+					const char *id, void *buf, size_t *len)
+{
+	if (!strcmp(cell->name, "ethaddr")) {
+		u8 mac[ETH_ALEN];
+
+		if (mac_pton(buf, mac)) {
+			ether_addr_copy(buf, mac);
+			if (len)
+				*len = ETH_ALEN;
+		}
+	}
+
+	return 0;
+}
+
 static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
 				size_t data_offset, size_t data_len)
 {
@@ -179,6 +197,7 @@ static int u_boot_env_probe(struct platform_device *pdev)
 	struct nvmem_config config = {
 		.name = "u-boot-env",
 		.reg_read = u_boot_env_read,
+		.cell_post_process = u_boot_env_cell_post_process,
 	};
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: "Michael Walle" <michael@walle.cc>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Shawn Guo" <shawnguo@kernel.org>,
	linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, u-boot@lists.denx.de,
	"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH V2 2/2] nvmem: u-boot-env: reformat MAC in "ethaddr" cell when reading
Date: Mon, 28 Nov 2022 07:59:23 +0100	[thread overview]
Message-ID: <20221128065923.1180-2-zajec5@gmail.com> (raw)
In-Reply-To: <20221128065923.1180-1-zajec5@gmail.com>

From: Rafał Miłecki <rafal@milecki.pl>

NVMEM consumers expect MAC in a byte-based format (see e.g.
nvmem_get_mac_address()). U-Boot environment data stores all values in
ASCII form.

Add post processing callback detecting "ethaddr" reads and reformat data
as expected. This fixes Ethernet drivers reading MAC from NVMEM devices.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: select GENERIC_NET_UTILS & drop unused "priv" variable
---
 drivers/nvmem/Kconfig      |  1 +
 drivers/nvmem/u-boot-env.c | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 755f551426b5..34fb0ba36b80 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -326,6 +326,7 @@ config NVMEM_U_BOOT_ENV
 	tristate "U-Boot environment variables support"
 	depends on OF && MTD
 	select CRC32
+	select GENERIC_NET_UTILS
 	help
 	  U-Boot stores its setup as environment variables. This driver adds
 	  support for verifying & exporting such data. It also exposes variables
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index 2a87dda45188..e30ce4f7ea20 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -4,6 +4,8 @@
  */
 
 #include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
@@ -70,6 +72,22 @@ static int u_boot_env_read(void *context, unsigned int offset, void *val,
 	return 0;
 }
 
+static int u_boot_env_cell_post_process(void *context, struct nvmem_cell_entry *cell,
+					const char *id, void *buf, size_t *len)
+{
+	if (!strcmp(cell->name, "ethaddr")) {
+		u8 mac[ETH_ALEN];
+
+		if (mac_pton(buf, mac)) {
+			ether_addr_copy(buf, mac);
+			if (len)
+				*len = ETH_ALEN;
+		}
+	}
+
+	return 0;
+}
+
 static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
 				size_t data_offset, size_t data_len)
 {
@@ -179,6 +197,7 @@ static int u_boot_env_probe(struct platform_device *pdev)
 	struct nvmem_config config = {
 		.name = "u-boot-env",
 		.reg_read = u_boot_env_read,
+		.cell_post_process = u_boot_env_cell_post_process,
 	};
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: "Michael Walle" <michael@walle.cc>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Shawn Guo" <shawnguo@kernel.org>,
	linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, u-boot@lists.denx.de,
	"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH V2 2/2] nvmem: u-boot-env: reformat MAC in "ethaddr" cell when reading
Date: Mon, 28 Nov 2022 07:59:23 +0100	[thread overview]
Message-ID: <20221128065923.1180-2-zajec5@gmail.com> (raw)
In-Reply-To: <20221128065923.1180-1-zajec5@gmail.com>

From: Rafał Miłecki <rafal@milecki.pl>

NVMEM consumers expect MAC in a byte-based format (see e.g.
nvmem_get_mac_address()). U-Boot environment data stores all values in
ASCII form.

Add post processing callback detecting "ethaddr" reads and reformat data
as expected. This fixes Ethernet drivers reading MAC from NVMEM devices.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: select GENERIC_NET_UTILS & drop unused "priv" variable
---
 drivers/nvmem/Kconfig      |  1 +
 drivers/nvmem/u-boot-env.c | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 755f551426b5..34fb0ba36b80 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -326,6 +326,7 @@ config NVMEM_U_BOOT_ENV
 	tristate "U-Boot environment variables support"
 	depends on OF && MTD
 	select CRC32
+	select GENERIC_NET_UTILS
 	help
 	  U-Boot stores its setup as environment variables. This driver adds
 	  support for verifying & exporting such data. It also exposes variables
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index 2a87dda45188..e30ce4f7ea20 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -4,6 +4,8 @@
  */
 
 #include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
@@ -70,6 +72,22 @@ static int u_boot_env_read(void *context, unsigned int offset, void *val,
 	return 0;
 }
 
+static int u_boot_env_cell_post_process(void *context, struct nvmem_cell_entry *cell,
+					const char *id, void *buf, size_t *len)
+{
+	if (!strcmp(cell->name, "ethaddr")) {
+		u8 mac[ETH_ALEN];
+
+		if (mac_pton(buf, mac)) {
+			ether_addr_copy(buf, mac);
+			if (len)
+				*len = ETH_ALEN;
+		}
+	}
+
+	return 0;
+}
+
 static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
 				size_t data_offset, size_t data_len)
 {
@@ -179,6 +197,7 @@ static int u_boot_env_probe(struct platform_device *pdev)
 	struct nvmem_config config = {
 		.name = "u-boot-env",
 		.reg_read = u_boot_env_read,
+		.cell_post_process = u_boot_env_cell_post_process,
 	};
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-11-28  7:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-28  6:59 [PATCH V2 1/2] nvmem: core: refactor .cell_post_process() CB arguments Rafał Miłecki
2022-11-28  6:59 ` Rafał Miłecki
2022-11-28  6:59 ` Rafał Miłecki
2022-11-28  6:59 ` Rafał Miłecki [this message]
2022-11-28  6:59   ` [PATCH V2 2/2] nvmem: u-boot-env: reformat MAC in "ethaddr" cell when reading Rafał Miłecki
2022-11-28  6:59   ` Rafał Miłecki
2022-11-28  7:35 ` [PATCH V2 1/2] nvmem: core: refactor .cell_post_process() CB arguments Michael Walle
2022-11-28  7:35   ` Michael Walle
2022-11-28  7:35   ` Michael Walle
2022-11-28  8:30   ` Miquel Raynal
2022-11-28  8:30     ` Miquel Raynal
2022-11-28  8:30     ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221128065923.1180-2-zajec5@gmail.com \
    --to=zajec5@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=rafal@milecki.pl \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=u-boot@lists.denx.de \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.