From: Arnd Bergmann <arnd@kernel.org>
To: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Alan Stern <stern@rowland.harvard.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org
Subject: [PATCH 03/27] ARM: pxa: remove unused pxa3xx-ulpi
Date: Thu, 5 Jan 2023 14:45:58 +0100 [thread overview]
Message-ID: <20230105134622.254560-4-arnd@kernel.org> (raw)
In-Reply-To: <20230105134622.254560-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
This was only used by the cm-x300 board, which is now gone.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-pxa/Makefile | 2 +-
arch/arm/mach-pxa/devices.c | 28 --
arch/arm/mach-pxa/devices.h | 1 -
arch/arm/mach-pxa/pxa3xx-ulpi.c | 385 ------------------
arch/arm/mach-pxa/regs-u2d.h | 199 ---------
drivers/usb/host/ohci-pxa27x.c | 9 -
include/linux/platform_data/usb-pxa3xx-ulpi.h | 32 --
7 files changed, 1 insertion(+), 655 deletions(-)
delete mode 100644 arch/arm/mach-pxa/pxa3xx-ulpi.c
delete mode 100644 arch/arm/mach-pxa/regs-u2d.h
delete mode 100644 include/linux/platform_data/usb-pxa3xx-ulpi.h
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 4ca8cac2e60f..9624f90d9ef6 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_PM) += pm.o sleep.o standby.o
# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
# NOTE: keep the order of boards in accordance to their order in Kconfig
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 72adaac9f332..8e3bc56d2044 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -12,7 +12,6 @@
#include <linux/soc/pxa/cpu.h>
#include "udc.h"
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "irqs.h"
@@ -130,33 +129,6 @@ struct platform_device pxa27x_device_udc = {
}
};
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_u2d_resources[] = {
- [0] = {
- .start = 0x54100000,
- .end = 0x54100fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USB2,
- .end = IRQ_USB2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa3xx_device_u2d = {
- .name = "pxa3xx-u2d",
- .id = -1,
- .resource = pxa3xx_u2d_resources,
- .num_resources = ARRAY_SIZE(pxa3xx_u2d_resources),
-};
-
-void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
-{
- pxa_register_device(&pxa3xx_device_u2d, info);
-}
-#endif /* CONFIG_PXA3xx */
-
static struct resource pxafb_resources[] = {
[0] = {
.start = 0x44000000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 2828bea76cd7..82c83939017a 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -9,7 +9,6 @@ extern struct platform_device pxa3xx_device_mci2;
extern struct platform_device pxa3xx_device_mci3;
extern struct platform_device pxa25x_device_udc;
extern struct platform_device pxa27x_device_udc;
-extern struct platform_device pxa3xx_device_u2d;
extern struct platform_device pxa_device_fb;
extern struct platform_device pxa_device_ffuart;
extern struct platform_device pxa_device_btuart;
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
deleted file mode 100644
index c29a7f0fa1b0..000000000000
diff --git a/arch/arm/mach-pxa/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h
deleted file mode 100644
index ab517ba62c9a..000000000000
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a1dad8745622..0bc7e96bcc93 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -29,7 +29,6 @@
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/signal.h>
@@ -275,7 +274,6 @@ static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
int retval;
struct pxaohci_platform_data *inf;
uint32_t uhchr;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
inf = dev_get_platdata(dev);
@@ -301,9 +299,6 @@ static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
return retval;
}
- if (cpu_is_pxa3xx())
- pxa3xx_u2d_start_hc(&hcd->self);
-
uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
__raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR);
__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, pxa_ohci->mmio_base + UHCHIE);
@@ -316,14 +311,10 @@ static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
static void pxa27x_stop_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
{
struct pxaohci_platform_data *inf;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
uint32_t uhccoms;
inf = dev_get_platdata(dev);
- if (cpu_is_pxa3xx())
- pxa3xx_u2d_stop_hc(&hcd->self);
-
if (inf->exit)
inf->exit(dev);
diff --git a/include/linux/platform_data/usb-pxa3xx-ulpi.h b/include/linux/platform_data/usb-pxa3xx-ulpi.h
deleted file mode 100644
index 4d31a5cbdeb1..000000000000
--
2.39.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Alan Stern <stern@rowland.harvard.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org
Subject: [PATCH 03/27] ARM: pxa: remove unused pxa3xx-ulpi
Date: Thu, 5 Jan 2023 14:45:58 +0100 [thread overview]
Message-ID: <20230105134622.254560-4-arnd@kernel.org> (raw)
In-Reply-To: <20230105134622.254560-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
This was only used by the cm-x300 board, which is now gone.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-pxa/Makefile | 2 +-
arch/arm/mach-pxa/devices.c | 28 --
arch/arm/mach-pxa/devices.h | 1 -
arch/arm/mach-pxa/pxa3xx-ulpi.c | 385 ------------------
arch/arm/mach-pxa/regs-u2d.h | 199 ---------
drivers/usb/host/ohci-pxa27x.c | 9 -
include/linux/platform_data/usb-pxa3xx-ulpi.h | 32 --
7 files changed, 1 insertion(+), 655 deletions(-)
delete mode 100644 arch/arm/mach-pxa/pxa3xx-ulpi.c
delete mode 100644 arch/arm/mach-pxa/regs-u2d.h
delete mode 100644 include/linux/platform_data/usb-pxa3xx-ulpi.h
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 4ca8cac2e60f..9624f90d9ef6 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_PM) += pm.o sleep.o standby.o
# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
# NOTE: keep the order of boards in accordance to their order in Kconfig
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 72adaac9f332..8e3bc56d2044 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -12,7 +12,6 @@
#include <linux/soc/pxa/cpu.h>
#include "udc.h"
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "irqs.h"
@@ -130,33 +129,6 @@ struct platform_device pxa27x_device_udc = {
}
};
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_u2d_resources[] = {
- [0] = {
- .start = 0x54100000,
- .end = 0x54100fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USB2,
- .end = IRQ_USB2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa3xx_device_u2d = {
- .name = "pxa3xx-u2d",
- .id = -1,
- .resource = pxa3xx_u2d_resources,
- .num_resources = ARRAY_SIZE(pxa3xx_u2d_resources),
-};
-
-void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
-{
- pxa_register_device(&pxa3xx_device_u2d, info);
-}
-#endif /* CONFIG_PXA3xx */
-
static struct resource pxafb_resources[] = {
[0] = {
.start = 0x44000000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 2828bea76cd7..82c83939017a 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -9,7 +9,6 @@ extern struct platform_device pxa3xx_device_mci2;
extern struct platform_device pxa3xx_device_mci3;
extern struct platform_device pxa25x_device_udc;
extern struct platform_device pxa27x_device_udc;
-extern struct platform_device pxa3xx_device_u2d;
extern struct platform_device pxa_device_fb;
extern struct platform_device pxa_device_ffuart;
extern struct platform_device pxa_device_btuart;
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
deleted file mode 100644
index c29a7f0fa1b0..000000000000
diff --git a/arch/arm/mach-pxa/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h
deleted file mode 100644
index ab517ba62c9a..000000000000
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a1dad8745622..0bc7e96bcc93 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -29,7 +29,6 @@
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/signal.h>
@@ -275,7 +274,6 @@ static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
int retval;
struct pxaohci_platform_data *inf;
uint32_t uhchr;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
inf = dev_get_platdata(dev);
@@ -301,9 +299,6 @@ static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
return retval;
}
- if (cpu_is_pxa3xx())
- pxa3xx_u2d_start_hc(&hcd->self);
-
uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
__raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR);
__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, pxa_ohci->mmio_base + UHCHIE);
@@ -316,14 +311,10 @@ static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
static void pxa27x_stop_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
{
struct pxaohci_platform_data *inf;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
uint32_t uhccoms;
inf = dev_get_platdata(dev);
- if (cpu_is_pxa3xx())
- pxa3xx_u2d_stop_hc(&hcd->self);
-
if (inf->exit)
inf->exit(dev);
diff --git a/include/linux/platform_data/usb-pxa3xx-ulpi.h b/include/linux/platform_data/usb-pxa3xx-ulpi.h
deleted file mode 100644
index 4d31a5cbdeb1..000000000000
--
2.39.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-05 13:47 UTC|newest]
Thread overview: 158+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 13:45 [PATCH v2 00/27] ARM: pxa: remove all unused boards&drivers Arnd Bergmann
2023-01-05 13:45 ` Arnd Bergmann
2023-01-05 13:45 ` Arnd Bergmann
2023-01-05 13:45 ` [PATCH 01/27] ARM: pxa: remove unused board files Arnd Bergmann
2023-01-05 13:45 ` Arnd Bergmann
2023-01-05 15:50 ` Dmitry Baryshkov
2023-01-05 15:50 ` Dmitry Baryshkov
2023-01-05 17:05 ` Richard Purdie
2023-01-05 17:05 ` Richard Purdie
2023-01-05 22:16 ` Arnd Bergmann
2023-01-05 22:16 ` Arnd Bergmann
2023-01-05 22:45 ` Richard Purdie
2023-01-05 22:45 ` Richard Purdie
2023-01-06 9:47 ` Arnd Bergmann
2023-01-06 9:47 ` Arnd Bergmann
2023-01-06 10:06 ` Dmitry Baryshkov
2023-01-06 10:06 ` Dmitry Baryshkov
2023-01-08 9:06 ` Robert Jarzmik
2023-01-08 9:06 ` Robert Jarzmik
2023-01-08 20:36 ` Linus Walleij
2023-01-08 20:36 ` Linus Walleij
2023-01-08 21:05 ` Arnd Bergmann
2023-01-08 21:05 ` Arnd Bergmann
2023-01-08 21:12 ` Dmitry Baryshkov
2023-01-08 21:12 ` Dmitry Baryshkov
2023-01-08 21:20 ` Arnd Bergmann
2023-01-08 21:20 ` Arnd Bergmann
2023-01-05 13:45 ` [PATCH 02/27] ARM: pxa: remove irda leftover Arnd Bergmann
2023-01-05 13:45 ` Arnd Bergmann
2023-01-05 13:45 ` Arnd Bergmann [this message]
2023-01-05 13:45 ` [PATCH 03/27] ARM: pxa: remove unused pxa3xx-ulpi Arnd Bergmann
2023-01-05 14:55 ` Greg Kroah-Hartman
2023-01-05 14:55 ` Greg Kroah-Hartman
2023-01-05 13:45 ` [PATCH 04/27] ARM: pxa: drop pxa310/pxa320/pxa93x support Arnd Bergmann
2023-01-05 13:45 ` Arnd Bergmann
2023-01-05 14:59 ` Ulf Hansson
2023-01-05 14:59 ` Ulf Hansson
2023-01-06 2:19 ` Viresh Kumar
2023-01-06 2:19 ` Viresh Kumar
2023-01-08 8:49 ` Robert Jarzmik
2023-01-08 8:49 ` Robert Jarzmik
2023-01-08 13:40 ` Arnd Bergmann
2023-01-08 13:40 ` Arnd Bergmann
2023-01-09 14:18 ` Arnd Bergmann
2023-01-09 14:18 ` Arnd Bergmann
2023-01-12 17:37 ` Robert Jarzmik
2023-01-12 17:37 ` Robert Jarzmik
2023-01-05 13:46 ` [PATCH 05/27] ARM: pxa: prune unused device support Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 06/27] power: remove z2_battery driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 16:35 ` Sebastian Reichel
2023-01-05 16:35 ` Sebastian Reichel
2023-01-05 13:46 ` [PATCH 07/27] power: remove tosa_battery driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 16:42 ` Sebastian Reichel
2023-01-05 16:42 ` Sebastian Reichel
2023-01-05 17:16 ` Arnd Bergmann
2023-01-05 17:16 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 08/27] ata: remove palmld pata driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-06 6:25 ` Damien Le Moal
2023-01-06 6:25 ` Damien Le Moal
2023-01-11 17:37 ` Sergey Shtylyov
2023-01-11 17:37 ` Sergey Shtylyov
2023-01-05 13:46 ` [PATCH 09/27] backlight: remove pxa tosa support Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 14:23 ` Daniel Thompson
2023-01-05 14:23 ` Daniel Thompson
2023-01-20 14:00 ` Lee Jones
2023-01-20 14:00 ` Lee Jones
2023-01-05 13:46 ` [PATCH 10/27] input: remove pxa930_trkball driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 11/27] input: remove pxa930_rotary keyboard driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 12/27] input: remove zylonite touchscreen driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 13/27] pcmcia: remove unused pxa/sa1100 drivers Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 14/27] ASoC: PXA: make SND_PXA2XX_SOC_AC97 user-selectable Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 15/27] ASoC: pxa: remove unused board support Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-10 13:58 ` Mark Brown
2023-01-10 13:58 ` Mark Brown
2023-01-10 13:58 ` Mark Brown
2023-01-05 13:46 ` [PATCH 16/27] power: remove pda_power supply driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 16:39 ` Sebastian Reichel
2023-01-05 16:39 ` Sebastian Reichel
2023-01-05 13:46 ` [PATCH 17/27] rtc: remove v3020 driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 18/27] mfd: remove toshiba tmio drivers Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-20 14:55 ` Lee Jones
2023-01-20 14:55 ` Lee Jones
2023-01-05 13:46 ` [PATCH 19/27] mfd: remove ucb1400 support Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-20 14:18 ` Lee Jones
2023-01-20 14:18 ` Lee Jones
2023-01-20 14:18 ` Lee Jones
2023-01-20 14:27 ` Arnd Bergmann
2023-01-20 14:27 ` Arnd Bergmann
2023-01-20 14:27 ` Arnd Bergmann
2023-01-20 14:57 ` Lee Jones
2023-01-20 14:57 ` Lee Jones
2023-01-20 14:57 ` Lee Jones
2023-01-05 13:46 ` [PATCH 20/27] mtd: remove tmio_nand driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-07 15:41 ` Miquel Raynal
2023-01-07 15:41 ` Miquel Raynal
2023-01-07 15:41 ` Miquel Raynal
2023-01-05 13:46 ` [PATCH 21/27] mmc: remove tmio_mmc driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 15:01 ` Ulf Hansson
2023-01-05 15:01 ` Ulf Hansson
2023-01-05 15:44 ` Arnd Bergmann
2023-01-05 15:44 ` Arnd Bergmann
2023-01-16 10:48 ` Ulf Hansson
2023-01-16 10:48 ` Ulf Hansson
2023-01-05 15:14 ` Wolfram Sang
2023-01-05 15:14 ` Wolfram Sang
2023-01-05 13:46 ` [PATCH 22/27] fbdev: remove tmiofb driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-06 9:47 ` Helge Deller
2023-01-06 9:47 ` Helge Deller
2023-01-06 9:47 ` Helge Deller
2023-01-06 11:25 ` Arnd Bergmann
2023-01-06 11:25 ` Arnd Bergmann
2023-01-06 11:25 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 23/27] fbdev: remove w100fb driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 24/27] leds: remove asic3 driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-20 14:02 ` Lee Jones
2023-01-20 14:02 ` Lee Jones
2023-01-05 13:46 ` [PATCH 25/27] usb: remove ohci-tmio driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 14:55 ` Greg Kroah-Hartman
2023-01-05 14:55 ` Greg Kroah-Hartman
2023-01-05 15:03 ` Arnd Bergmann
2023-01-05 15:03 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 26/27] w1: remove ds1wm driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-05 13:46 ` [PATCH 27/27] mfd: remove htc-pasic3 driver Arnd Bergmann
2023-01-05 13:46 ` Arnd Bergmann
2023-01-20 14:09 ` Lee Jones
2023-01-20 14:09 ` Lee Jones
2023-01-12 20:01 ` (subset) [PATCH v2 00/27] ARM: pxa: remove all unused boards&drivers Mark Brown
2023-01-12 20:01 ` Mark Brown
2023-01-12 20:01 ` Mark Brown
2023-01-12 20:01 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230105134622.254560-4-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=daniel@zonque.org \
--cc=gregkh@linuxfoundation.org \
--cc=haojian.zhuang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robert.jarzmik@free.fr \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.