From: Sasha Finkelstein <fnkl.kernel@gmail.com>
To: u.kleine-koenig@pengutronix.de, thierry.reding@gmail.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc: marcan@marcan.st, sven@svenpeter.dev, alyssa@rosenzweig.io,
asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sasha Finkelstein <fnkl.kernel@gmail.com>
Subject: [PATCH v7 2/5] pwm: Add Apple PWM controller
Date: Sat, 14 Jan 2023 16:25:05 +0300 [thread overview]
Message-ID: <20230114132508.96600-3-fnkl.kernel@gmail.com> (raw)
In-Reply-To: <20230114132508.96600-1-fnkl.kernel@gmail.com>
Adds the Apple PWM controller driver.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
---
drivers/pwm/Kconfig | 12 +++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-apple.c | 159 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 172 insertions(+)
create mode 100644 drivers/pwm/pwm-apple.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index dae023d783a2..8df861b1f4a3 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -51,6 +51,18 @@ config PWM_AB8500
To compile this driver as a module, choose M here: the module
will be called pwm-ab8500.
+config PWM_APPLE
+ tristate "Apple SoC PWM support"
+ depends on ARCH_APPLE || COMPILE_TEST
+ help
+ Generic PWM framework driver for PWM controller present on
+ Apple SoCs
+
+ Say Y here if you have an ARM Apple laptop, otherwise say N
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-apple.
+
config PWM_ATMEL
tristate "Atmel PWM support"
depends on ARCH_AT91 || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 7bf1a29f02b8..19899b912e00 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_PWM) += core.o
obj-$(CONFIG_PWM_SYSFS) += sysfs.o
obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
+obj-$(CONFIG_PWM_APPLE) += pwm-apple.o
obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
diff --git a/drivers/pwm/pwm-apple.c b/drivers/pwm/pwm-apple.c
new file mode 100644
index 000000000000..551e07d49bf7
--- /dev/null
+++ b/drivers/pwm/pwm-apple.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Driver for the Apple SoC PWM controller
+ *
+ * Copyright The Asahi Linux Contributors
+ *
+ * Limitations:
+ * - The writes to cycle registers are shadowed until a write to
+ * the control register.
+ * - If both OFF_CYCLES and ON_CYCLES are set to 0, the output
+ * is a constant off signal.
+ * - When APPLE_PWM_CTRL is set to 0, the output is constant low
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/math64.h>
+
+#define APPLE_PWM_CTRL 0x00
+#define APPLE_PWM_ON_CYCLES 0x1c
+#define APPLE_PWM_OFF_CYCLES 0x18
+
+#define APPLE_PWM_CTRL_ENABLE BIT(0)
+#define APPLE_PWM_CTRL_MODE BIT(2)
+#define APPLE_PWM_CTRL_UPDATE BIT(5)
+#define APPLE_PWM_CTRL_TRIGGER BIT(9)
+#define APPLE_PWM_CTRL_INVERT BIT(10)
+#define APPLE_PWM_CTRL_OUTPUT_ENABLE BIT(14)
+
+struct apple_pwm {
+ struct pwm_chip chip;
+ void __iomem *base;
+ u64 clkrate;
+};
+
+static inline struct apple_pwm *to_apple_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct apple_pwm, chip);
+}
+
+static int apple_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct apple_pwm *fpwm;
+
+ if (state->polarity == PWM_POLARITY_INVERSED)
+ return -EINVAL;
+
+ fpwm = to_apple_pwm(chip);
+ if (state->enabled) {
+ u64 on_cycles, off_cycles;
+
+ on_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
+ state->duty_cycle, NSEC_PER_SEC);
+ if (on_cycles > 0xFFFFFFFF)
+ return -ERANGE;
+
+ off_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
+ state->period, NSEC_PER_SEC) - on_cycles;
+ if (off_cycles > 0xFFFFFFFF)
+ return -ERANGE;
+
+ writel(on_cycles, fpwm->base + APPLE_PWM_ON_CYCLES);
+ writel(off_cycles, fpwm->base + APPLE_PWM_OFF_CYCLES);
+ writel(APPLE_PWM_CTRL_ENABLE | APPLE_PWM_CTRL_OUTPUT_ENABLE | APPLE_PWM_CTRL_UPDATE,
+ fpwm->base + APPLE_PWM_CTRL);
+ } else {
+ writel(0, fpwm->base + APPLE_PWM_CTRL);
+ }
+ return 0;
+}
+
+static int apple_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct apple_pwm *fpwm;
+ u32 on_cycles, off_cycles, ctrl;
+
+ fpwm = to_apple_pwm(chip);
+
+ ctrl = readl(fpwm->base + APPLE_PWM_CTRL);
+ on_cycles = readl(fpwm->base + APPLE_PWM_ON_CYCLES);
+ off_cycles = readl(fpwm->base + APPLE_PWM_OFF_CYCLES);
+
+ state->enabled = (ctrl & APPLE_PWM_CTRL_ENABLE) && (ctrl & APPLE_PWM_CTRL_OUTPUT_ENABLE);
+ state->polarity = PWM_POLARITY_NORMAL;
+ // on_cycles + off_cycles is 33 bits, NSEC_PER_SEC is 30, there is no overflow
+ state->duty_cycle = DIV64_U64_ROUND_UP((u64)on_cycles * NSEC_PER_SEC, fpwm->clkrate);
+ state->period = DIV64_U64_ROUND_UP(((u64)off_cycles + (u64)on_cycles) *
+ NSEC_PER_SEC, fpwm->clkrate);
+
+ return 0;
+}
+
+static const struct pwm_ops apple_pwm_ops = {
+ .apply = apple_pwm_apply,
+ .get_state = apple_pwm_get_state,
+ .owner = THIS_MODULE,
+};
+
+static int apple_pwm_probe(struct platform_device *pdev)
+{
+ struct apple_pwm *fpwm;
+ struct clk *clk;
+ int ret;
+
+ fpwm = devm_kzalloc(&pdev->dev, sizeof(*fpwm), GFP_KERNEL);
+ if (!fpwm)
+ return -ENOMEM;
+
+ fpwm->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(fpwm->base))
+ return PTR_ERR(fpwm->base);
+
+ clk = devm_clk_get_enabled(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(clk), "unable to get the clock");
+
+ /*
+ * Uses the 24MHz system clock on all existing devices, can only
+ * happen if the device tree is broken
+ *
+ * This check is done to prevent an overflow in .apply
+ */
+ fpwm->clkrate = clk_get_rate(clk);
+ if (fpwm->clkrate > NSEC_PER_SEC)
+ return dev_err_probe(&pdev->dev, -EINVAL, "pwm clock out of range");
+
+ fpwm->chip.dev = &pdev->dev;
+ fpwm->chip.npwm = 1;
+ fpwm->chip.ops = &apple_pwm_ops;
+
+ ret = devm_pwmchip_add(&pdev->dev, &fpwm->chip);
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret, "unable to add pwm chip");
+
+ return 0;
+}
+
+static const struct of_device_id apple_pwm_of_match[] = {
+ { .compatible = "apple,s5l-fpwm" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, apple_pwm_of_match);
+
+static struct platform_driver apple_pwm_driver = {
+ .probe = apple_pwm_probe,
+ .driver = {
+ .name = "apple-pwm",
+ .of_match_table = apple_pwm_of_match,
+ },
+};
+module_platform_driver(apple_pwm_driver);
+
+MODULE_DESCRIPTION("Apple SoC PWM driver");
+MODULE_LICENSE("Dual MIT/GPL");
--
2.37.1 (Apple Git-137.1)
WARNING: multiple messages have this Message-ID (diff)
From: Sasha Finkelstein <fnkl.kernel@gmail.com>
To: u.kleine-koenig@pengutronix.de, thierry.reding@gmail.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc: marcan@marcan.st, sven@svenpeter.dev, alyssa@rosenzweig.io,
asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sasha Finkelstein <fnkl.kernel@gmail.com>
Subject: [PATCH v7 2/5] pwm: Add Apple PWM controller
Date: Sat, 14 Jan 2023 16:25:05 +0300 [thread overview]
Message-ID: <20230114132508.96600-3-fnkl.kernel@gmail.com> (raw)
In-Reply-To: <20230114132508.96600-1-fnkl.kernel@gmail.com>
Adds the Apple PWM controller driver.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
---
drivers/pwm/Kconfig | 12 +++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-apple.c | 159 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 172 insertions(+)
create mode 100644 drivers/pwm/pwm-apple.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index dae023d783a2..8df861b1f4a3 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -51,6 +51,18 @@ config PWM_AB8500
To compile this driver as a module, choose M here: the module
will be called pwm-ab8500.
+config PWM_APPLE
+ tristate "Apple SoC PWM support"
+ depends on ARCH_APPLE || COMPILE_TEST
+ help
+ Generic PWM framework driver for PWM controller present on
+ Apple SoCs
+
+ Say Y here if you have an ARM Apple laptop, otherwise say N
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-apple.
+
config PWM_ATMEL
tristate "Atmel PWM support"
depends on ARCH_AT91 || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 7bf1a29f02b8..19899b912e00 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_PWM) += core.o
obj-$(CONFIG_PWM_SYSFS) += sysfs.o
obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
+obj-$(CONFIG_PWM_APPLE) += pwm-apple.o
obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
diff --git a/drivers/pwm/pwm-apple.c b/drivers/pwm/pwm-apple.c
new file mode 100644
index 000000000000..551e07d49bf7
--- /dev/null
+++ b/drivers/pwm/pwm-apple.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Driver for the Apple SoC PWM controller
+ *
+ * Copyright The Asahi Linux Contributors
+ *
+ * Limitations:
+ * - The writes to cycle registers are shadowed until a write to
+ * the control register.
+ * - If both OFF_CYCLES and ON_CYCLES are set to 0, the output
+ * is a constant off signal.
+ * - When APPLE_PWM_CTRL is set to 0, the output is constant low
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/math64.h>
+
+#define APPLE_PWM_CTRL 0x00
+#define APPLE_PWM_ON_CYCLES 0x1c
+#define APPLE_PWM_OFF_CYCLES 0x18
+
+#define APPLE_PWM_CTRL_ENABLE BIT(0)
+#define APPLE_PWM_CTRL_MODE BIT(2)
+#define APPLE_PWM_CTRL_UPDATE BIT(5)
+#define APPLE_PWM_CTRL_TRIGGER BIT(9)
+#define APPLE_PWM_CTRL_INVERT BIT(10)
+#define APPLE_PWM_CTRL_OUTPUT_ENABLE BIT(14)
+
+struct apple_pwm {
+ struct pwm_chip chip;
+ void __iomem *base;
+ u64 clkrate;
+};
+
+static inline struct apple_pwm *to_apple_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct apple_pwm, chip);
+}
+
+static int apple_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct apple_pwm *fpwm;
+
+ if (state->polarity == PWM_POLARITY_INVERSED)
+ return -EINVAL;
+
+ fpwm = to_apple_pwm(chip);
+ if (state->enabled) {
+ u64 on_cycles, off_cycles;
+
+ on_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
+ state->duty_cycle, NSEC_PER_SEC);
+ if (on_cycles > 0xFFFFFFFF)
+ return -ERANGE;
+
+ off_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
+ state->period, NSEC_PER_SEC) - on_cycles;
+ if (off_cycles > 0xFFFFFFFF)
+ return -ERANGE;
+
+ writel(on_cycles, fpwm->base + APPLE_PWM_ON_CYCLES);
+ writel(off_cycles, fpwm->base + APPLE_PWM_OFF_CYCLES);
+ writel(APPLE_PWM_CTRL_ENABLE | APPLE_PWM_CTRL_OUTPUT_ENABLE | APPLE_PWM_CTRL_UPDATE,
+ fpwm->base + APPLE_PWM_CTRL);
+ } else {
+ writel(0, fpwm->base + APPLE_PWM_CTRL);
+ }
+ return 0;
+}
+
+static int apple_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct apple_pwm *fpwm;
+ u32 on_cycles, off_cycles, ctrl;
+
+ fpwm = to_apple_pwm(chip);
+
+ ctrl = readl(fpwm->base + APPLE_PWM_CTRL);
+ on_cycles = readl(fpwm->base + APPLE_PWM_ON_CYCLES);
+ off_cycles = readl(fpwm->base + APPLE_PWM_OFF_CYCLES);
+
+ state->enabled = (ctrl & APPLE_PWM_CTRL_ENABLE) && (ctrl & APPLE_PWM_CTRL_OUTPUT_ENABLE);
+ state->polarity = PWM_POLARITY_NORMAL;
+ // on_cycles + off_cycles is 33 bits, NSEC_PER_SEC is 30, there is no overflow
+ state->duty_cycle = DIV64_U64_ROUND_UP((u64)on_cycles * NSEC_PER_SEC, fpwm->clkrate);
+ state->period = DIV64_U64_ROUND_UP(((u64)off_cycles + (u64)on_cycles) *
+ NSEC_PER_SEC, fpwm->clkrate);
+
+ return 0;
+}
+
+static const struct pwm_ops apple_pwm_ops = {
+ .apply = apple_pwm_apply,
+ .get_state = apple_pwm_get_state,
+ .owner = THIS_MODULE,
+};
+
+static int apple_pwm_probe(struct platform_device *pdev)
+{
+ struct apple_pwm *fpwm;
+ struct clk *clk;
+ int ret;
+
+ fpwm = devm_kzalloc(&pdev->dev, sizeof(*fpwm), GFP_KERNEL);
+ if (!fpwm)
+ return -ENOMEM;
+
+ fpwm->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(fpwm->base))
+ return PTR_ERR(fpwm->base);
+
+ clk = devm_clk_get_enabled(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(clk), "unable to get the clock");
+
+ /*
+ * Uses the 24MHz system clock on all existing devices, can only
+ * happen if the device tree is broken
+ *
+ * This check is done to prevent an overflow in .apply
+ */
+ fpwm->clkrate = clk_get_rate(clk);
+ if (fpwm->clkrate > NSEC_PER_SEC)
+ return dev_err_probe(&pdev->dev, -EINVAL, "pwm clock out of range");
+
+ fpwm->chip.dev = &pdev->dev;
+ fpwm->chip.npwm = 1;
+ fpwm->chip.ops = &apple_pwm_ops;
+
+ ret = devm_pwmchip_add(&pdev->dev, &fpwm->chip);
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret, "unable to add pwm chip");
+
+ return 0;
+}
+
+static const struct of_device_id apple_pwm_of_match[] = {
+ { .compatible = "apple,s5l-fpwm" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, apple_pwm_of_match);
+
+static struct platform_driver apple_pwm_driver = {
+ .probe = apple_pwm_probe,
+ .driver = {
+ .name = "apple-pwm",
+ .of_match_table = apple_pwm_of_match,
+ },
+};
+module_platform_driver(apple_pwm_driver);
+
+MODULE_DESCRIPTION("Apple SoC PWM driver");
+MODULE_LICENSE("Dual MIT/GPL");
--
2.37.1 (Apple Git-137.1)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-14 13:26 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-14 13:25 [PATCH v7 0/5] PWM and keyboard backlight driver for ARM Macs Sasha Finkelstein
2023-01-14 13:25 ` Sasha Finkelstein
2023-01-14 13:25 ` [PATCH v7 1/5] dt-bindings: pwm: Add Apple PWM controller Sasha Finkelstein
2023-01-14 13:25 ` Sasha Finkelstein
2023-01-14 13:25 ` Sasha Finkelstein [this message]
2023-01-14 13:25 ` [PATCH v7 2/5] " Sasha Finkelstein
2023-02-15 11:07 ` Uwe Kleine-König
2023-02-15 11:07 ` Uwe Kleine-König
2023-03-10 17:37 ` Uwe Kleine-König
2023-03-10 17:37 ` Uwe Kleine-König
2023-01-14 13:25 ` [PATCH v7 3/5] arm64: dts: apple: t8103: Add " Sasha Finkelstein
2023-01-14 13:25 ` Sasha Finkelstein
2023-02-15 11:16 ` Uwe Kleine-König
2023-02-15 11:16 ` Uwe Kleine-König
2023-02-15 16:47 ` Sasha Finkelstein
2023-02-15 16:47 ` Sasha Finkelstein
2023-02-15 18:04 ` Uwe Kleine-König
2023-02-15 18:04 ` Uwe Kleine-König
2023-02-15 18:19 ` Sasha Finkelstein
2023-02-15 18:19 ` Sasha Finkelstein
2023-02-15 18:22 ` Sven Peter
2023-02-15 18:22 ` Sven Peter
2023-01-14 13:25 ` [PATCH v7 4/5] arm64: dts: apple: t600x: " Sasha Finkelstein
2023-01-14 13:25 ` Sasha Finkelstein
2023-01-14 13:25 ` [PATCH v7 5/5] MAINTAINERS: Add entries for Apple PWM driver Sasha Finkelstein
2023-01-14 13:25 ` Sasha Finkelstein
-- strict thread matches above, loose matches on Subject: below --
2023-01-25 15:10 [PATCH v7 0/5] PWM and keyboard backlight driver for ARM Macs Sasha Finkelstein
2023-01-25 15:10 ` [PATCH v7 2/5] pwm: Add Apple PWM controller Sasha Finkelstein
2023-01-25 15:10 ` Sasha Finkelstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230114132508.96600-3-fnkl.kernel@gmail.com \
--to=fnkl.kernel@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=robh+dt@kernel.org \
--cc=sven@svenpeter.dev \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.