All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bryan Brattlof <bb@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: ARM Linux Mailing List <linux-arm-kernel@lists.infradead.org>,
	Device Tree Mailing List <devicetree@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Keerthy <j-keerthy@ti.com>, Bryan Brattlof <bb@ti.com>
Subject: [PATCH v2 6/6] arm64: dts: ti: k3-am62a-wakeup: add VTM node
Date: Thu, 19 Jan 2023 18:30:51 -0600	[thread overview]
Message-ID: <20230120003051.9100-7-bb@ti.com> (raw)
In-Reply-To: <20230120003051.9100-1-bb@ti.com>

The am62ax supports a single Voltage and Thermal Management (VTM) device
located in the wakeup domain with three associated temperature monitors
located in various hot spots of the die.

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi | 47 ++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi  |  8 ++++
 arch/arm64/boot/dts/ti/k3-am62a.dtsi         |  2 +
 3 files changed, 57 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
new file mode 100644
index 0000000000000..85ce545633ea5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main2_thermal: main2-thermal {
+	       polling-delay-passive = <250>;	/* milliSeconds */
+	       polling-delay = <500>;		/* milliSeconds */
+	       thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			main2_crit: main2-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 81d984414fd4a..9bdafead7199a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -51,4 +51,12 @@ wkup_rtc0: rtc@2b1f0000 {
 		wakeup-source;
 		status = "disabled";
 	};
+
+	wkup_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 6eb87c3f9f3ce..84e8adeeebb61 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -114,6 +114,8 @@ cbass_wakeup: bus@b00000 {
 				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
 		};
 	};
+
+	#include "k3-am62a-thermal.dtsi"
 };
 
 /* Now include the peripherals for each bus segments */
-- 
2.39.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Bryan Brattlof <bb@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: ARM Linux Mailing List <linux-arm-kernel@lists.infradead.org>,
	Device Tree Mailing List <devicetree@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Keerthy <j-keerthy@ti.com>, Bryan Brattlof <bb@ti.com>
Subject: [PATCH v2 6/6] arm64: dts: ti: k3-am62a-wakeup: add VTM node
Date: Thu, 19 Jan 2023 18:30:51 -0600	[thread overview]
Message-ID: <20230120003051.9100-7-bb@ti.com> (raw)
In-Reply-To: <20230120003051.9100-1-bb@ti.com>

The am62ax supports a single Voltage and Thermal Management (VTM) device
located in the wakeup domain with three associated temperature monitors
located in various hot spots of the die.

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi | 47 ++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi  |  8 ++++
 arch/arm64/boot/dts/ti/k3-am62a.dtsi         |  2 +
 3 files changed, 57 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
new file mode 100644
index 0000000000000..85ce545633ea5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main2_thermal: main2-thermal {
+	       polling-delay-passive = <250>;	/* milliSeconds */
+	       polling-delay = <500>;		/* milliSeconds */
+	       thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			main2_crit: main2-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 81d984414fd4a..9bdafead7199a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -51,4 +51,12 @@ wkup_rtc0: rtc@2b1f0000 {
 		wakeup-source;
 		status = "disabled";
 	};
+
+	wkup_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 6eb87c3f9f3ce..84e8adeeebb61 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -114,6 +114,8 @@ cbass_wakeup: bus@b00000 {
 				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
 		};
 	};
+
+	#include "k3-am62a-thermal.dtsi"
 };
 
 /* Now include the peripherals for each bus segments */
-- 
2.39.0


  parent reply	other threads:[~2023-01-20  0:33 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-20  0:30 [PATCH v2 0/6] add VTM nodes to TI's K3 SoCs Bryan Brattlof
2023-01-20  0:30 ` Bryan Brattlof
2023-01-20  0:30 ` [PATCH v2 1/6] arm64: dts: ti: k3-am64-main: add VTM node Bryan Brattlof
2023-01-20  0:30   ` Bryan Brattlof
2023-04-03 13:02   ` Christian Gmeiner
2023-04-03 13:02     ` Christian Gmeiner
2023-01-20  0:30 ` [PATCH v2 2/6] arm64: dts: ti: k3-am62-wakeup: " Bryan Brattlof
2023-01-20  0:30   ` Bryan Brattlof
2023-01-28  5:23   ` Raghavendra, Vignesh
2023-01-28  5:23     ` Raghavendra, Vignesh
2023-01-31  1:57     ` Bryan Brattlof
2023-01-31  1:57       ` Bryan Brattlof
2023-04-03 13:04       ` Christian Gmeiner
2023-04-03 13:04         ` Christian Gmeiner
2023-04-03 14:09         ` Bryan Brattlof
2023-04-03 14:09           ` Bryan Brattlof
2023-01-20  0:30 ` [PATCH v2 3/6] arm64: dts: ti: k3-j721e-mcu-wakeup: " Bryan Brattlof
2023-01-20  0:30   ` Bryan Brattlof
2023-01-20  0:30 ` [PATCH v2 4/6] arm64: dts: ti: k3-j721s2-mcu-wakeup: " Bryan Brattlof
2023-01-20  0:30   ` Bryan Brattlof
2023-01-20  0:30 ` [PATCH v2 5/6] arm64: dts: ti: k3-j7200-mcu-wakeup: " Bryan Brattlof
2023-01-20  0:30   ` Bryan Brattlof
2023-01-20  0:30 ` Bryan Brattlof [this message]
2023-01-20  0:30   ` [PATCH v2 6/6] arm64: dts: ti: k3-am62a-wakeup: " Bryan Brattlof
2023-06-15 10:22 ` [PATCH v2 0/6] add VTM nodes to TI's K3 SoCs Vignesh Raghavendra
2023-06-15 10:22   ` Vignesh Raghavendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230120003051.9100-7-bb@ti.com \
    --to=bb@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.