All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
	Shawn Guo <shawnguo@kernel.org>, Sasha Levin <sashal@kernel.org>,
	leoyang.li@nxp.com, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shijie.qin@nxp.com,
	eagle.zhou@nxp.com, ming.qian@nxp.com,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 03/35] arm64: dts: freescale: Fix pca954x i2c-mux node names
Date: Tue, 24 Jan 2023 08:40:59 -0500	[thread overview]
Message-ID: <20230124134131.637036-3-sashal@kernel.org> (raw)
In-Reply-To: <20230124134131.637036-1-sashal@kernel.org>

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit b025b4f5c288e29bbea421613a5b4eacf9261fbb ]

"make dtbs_check":

    arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts  | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi   | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi   | 2 +-
 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +-
 arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts    | 4 ++--
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts        | 2 +-
 12 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 5a8d85a7d161..bbdf989058ff 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@ &esdhc1 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 9b726c2a4842..dda27ed7aaf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -89,7 +89,7 @@ fpga: board-control@2,0 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index b2fcbba60d3a..3b0ed9305f2b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -88,7 +88,7 @@ &duart1 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@ flash@2 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy@0 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index ef6c8967533e..d4867d6cf47c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -245,7 +245,7 @@ rx8035: rtc@32 {
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index f598669e742f..52c5a43b30a0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -103,7 +103,7 @@ mdio0_phy15: mdio-phy3@1f {
 
 &i2c0 {
 	status = "okay";
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 3d9647b3da14..537cecb13dd0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@ cpld@3,0 {
 
 &i2c0 {
 	status = "okay";
-	pca9547@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9547";
 		reg = <0x75>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@ &esdhc1 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..6357078185ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 9dda2a1554c3..8614c18b5998 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@ &i2c4 {
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pca9546: i2cmux@70 {
+	pca9546: i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 07d8dd8160f6..afa883389456 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9646", "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.39.0


WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
	Shawn Guo <shawnguo@kernel.org>, Sasha Levin <sashal@kernel.org>,
	leoyang.li@nxp.com, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shijie.qin@nxp.com,
	eagle.zhou@nxp.com, ming.qian@nxp.com,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 03/35] arm64: dts: freescale: Fix pca954x i2c-mux node names
Date: Tue, 24 Jan 2023 08:40:59 -0500	[thread overview]
Message-ID: <20230124134131.637036-3-sashal@kernel.org> (raw)
In-Reply-To: <20230124134131.637036-1-sashal@kernel.org>

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit b025b4f5c288e29bbea421613a5b4eacf9261fbb ]

"make dtbs_check":

    arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts  | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi   | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi   | 2 +-
 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +-
 arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts    | 4 ++--
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts        | 2 +-
 12 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 5a8d85a7d161..bbdf989058ff 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@ &esdhc1 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 9b726c2a4842..dda27ed7aaf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -89,7 +89,7 @@ fpga: board-control@2,0 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index b2fcbba60d3a..3b0ed9305f2b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -88,7 +88,7 @@ &duart1 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@ flash@2 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy@0 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index ef6c8967533e..d4867d6cf47c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -245,7 +245,7 @@ rx8035: rtc@32 {
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index f598669e742f..52c5a43b30a0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -103,7 +103,7 @@ mdio0_phy15: mdio-phy3@1f {
 
 &i2c0 {
 	status = "okay";
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 3d9647b3da14..537cecb13dd0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@ cpld@3,0 {
 
 &i2c0 {
 	status = "okay";
-	pca9547@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9547";
 		reg = <0x75>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@ &esdhc1 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..6357078185ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 9dda2a1554c3..8614c18b5998 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@ &i2c4 {
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pca9546: i2cmux@70 {
+	pca9546: i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 07d8dd8160f6..afa883389456 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9646", "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.39.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-01-24 13:41 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-24 13:40 [PATCH AUTOSEL 6.1 01/35] ARM: dts: imx: Fix pca9547 i2c-mux node name Sasha Levin
2023-01-24 13:40 ` Sasha Levin
2023-01-24 13:40 ` [PATCH AUTOSEL 6.1 02/35] ARM: dts: vf610: Fix pca9548 i2c-mux node names Sasha Levin
2023-01-24 13:40   ` Sasha Levin
2023-01-24 13:40 ` Sasha Levin [this message]
2023-01-24 13:40   ` [PATCH AUTOSEL 6.1 03/35] arm64: dts: freescale: Fix pca954x " Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 04/35] arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI Sasha Levin
2023-01-24 13:41   ` Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 05/35] firmware: arm_scmi: Clear stale xfer->hdr.status Sasha Levin
2023-01-24 13:41   ` Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 06/35] bpf: Skip task with pid=1 in send_signal_common() Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 07/35] erofs/zmap.c: Fix incorrect offset calculation Sasha Levin
2023-01-24 13:41   ` Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 08/35] mac80211: Fix MLO address translation for multiple bss case Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 09/35] arm64: dts: msm8994-angler: fix the memory map Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 10/35] ARM: omap1: fix building gpio15xx Sasha Levin
2023-01-24 13:41   ` Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 11/35] init/Kconfig: fix LOCALVERSION_AUTO help text Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 12/35] kselftest: Fix error message for unconfigured LLVM builds Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 13/35] erofs: clean up parsing of fscache related options Sasha Levin
2023-01-24 13:41   ` Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 14/35] btrfs: factor out scratching of one regular super block Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 15/35] btrfs: stop using write_one_page in btrfs_scratch_superblock Sasha Levin
2023-01-24 16:57   ` David Sterba
2023-02-01 15:21     ` Sasha Levin
     [not found] ` <20230124134131.637036-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2023-01-24 13:41   ` [PATCH AUTOSEL 6.1 16/35] blk-cgroup: fix missing pd_online_fn() while activating policy Sasha Levin
2023-01-24 13:41     ` Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 17/35] LoongArch: Get frame info in unwind_start() when regs is not available Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 18/35] ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 19/35] block: fix hctx checks for batch allocation Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 20/35] s390: workaround invalid gcc-11 out of bounds read warning Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 21/35] HID: uclogic: Add support for XP-PEN Deco 01 V2 Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 22/35] HID: playstation: sanity check DualSense calibration data Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 23/35] dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init Sasha Levin
2023-01-24 13:41   ` Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 24/35] gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 25/35] cifs: fix return of uninitialized rc in dfs_cache_update_tgthint() Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 26/35] nvme-apple: only reset the controller when RTKit is running Sasha Levin
2023-01-24 13:41   ` Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 27/35] octeontx2-af: recover CPT engine when it gets fault Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 28/35] octeontx2-af: add mbox for CPT LF reset Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 29/35] octeontx2-af: modify FLR sequence for CPT Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 30/35] octeontx2-af: optimize cpt pf identification Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 31/35] octeontx2-af: restore rxc conf after teardown sequence Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 32/35] octeontx2-af: update cpt lf alloc mailbox Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 33/35] octeontx2-af: add mbox to return CPT_AF_FLT_INT info Sasha Levin
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 34/35] prlimit: do_prlimit needs to have a speculation check Sasha Levin
2023-01-24 15:28   ` Greg Kroah-Hartman
2023-01-24 13:41 ` [PATCH AUTOSEL 6.1 35/35] ext4: deal with legacy signed xattr name hash values Sasha Levin
2023-01-24 16:50   ` Linus Torvalds
2023-01-24 17:23     ` Linus Torvalds
2023-01-25 16:01       ` Theodore Ts'o
2023-01-26 14:12         ` Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230124134131.637036-3-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eagle.zhou@nxp.com \
    --cc=geert+renesas@glider.be \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ming.qian@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=shijie.qin@nxp.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.