[PATCH v1 1/1] usb: gadget: Use correct APIs and data types for UUID handling

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

We have two types for UUIDs depending on the byte ordering.
Instead of explaining how bytes should go over the wire,
use dedicated APIs and data types. This removes a confusion
over the byte ordering.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/usb/gadget/composite.c | 4 ++--
 include/linux/usb/webusb.h     | 9 +++------
 2 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 8e2603688016..fa7dd6cf014d 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -829,7 +829,7 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	if (cdev->use_webusb) {
 		struct usb_plat_dev_cap_descriptor *webusb_cap;
 		struct usb_webusb_cap_data *webusb_cap_data;
-		uuid_t webusb_uuid = WEBUSB_UUID;
+		guid_t webusb_uuid = WEBUSB_UUID;
 
 		webusb_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
 		webusb_cap_data = (struct usb_webusb_cap_data *) webusb_cap->CapabilityData;
@@ -841,7 +841,7 @@ static int bos_desc(struct usb_composite_dev *cdev)
 		webusb_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
 		webusb_cap->bDevCapabilityType = USB_PLAT_DEV_CAP_TYPE;
 		webusb_cap->bReserved = 0;
-		export_uuid(webusb_cap->UUID, &webusb_uuid);
+		export_guid(webusb_cap->UUID, &webusb_uuid);
 
 		if (cdev->bcd_webusb_version != 0)
 			webusb_cap_data->bcdVersion = cpu_to_le16(cdev->bcd_webusb_version);
diff --git a/include/linux/usb/webusb.h b/include/linux/usb/webusb.h
index b430d84357f3..fe43020b4a48 100644
--- a/include/linux/usb/webusb.h
+++ b/include/linux/usb/webusb.h
@@ -11,15 +11,12 @@
 #include "uapi/linux/usb/ch9.h"
 
 /*
- * little endian PlatformCapablityUUID for WebUSB
+ * Little Endian PlatformCapablityUUID for WebUSB
  * 3408b638-09a9-47a0-8bfd-a0768815b665
- * to identify Platform Device Capability descriptors as referring to WebUSB
- *
- * the UUID above MUST be sent over the wire as the byte sequence:
- * {0x38, 0xB6, 0x08, 0x34, 0xA9, 0x09, 0xA0, 0x47, 0x8B, 0xFD, 0xA0, 0x76, 0x88, 0x15, 0xB6, 0x65}.
+ * to identify Platform Device Capability descriptors as referring to WebUSB.
  */
 #define WEBUSB_UUID \
-	UUID_INIT(0x38b60834, 0xa909, 0xa047, 0x8b, 0xfd, 0xa0, 0x76, 0x88, 0x15, 0xb6, 0x65)
+	GUID_INIT(0x3408b638, 0x09a9, 0x47a0, 0x8b, 0xfd, 0xa0, 0x76, 0x88, 0x15, 0xb6, 0x65)
 
 /*
  * WebUSB Platform Capability data
-- 
2.39.0