From: Guenter Roeck <linux@roeck-us.net>
To: Andrej Picej <andrej.picej@norik.com>
Cc: linux-watchdog@vger.kernel.org, wim@linux-watchdog.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
Anson.Huang@nxp.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/3] dt-bindings: watchdog: fsl-imx: document suspend in wait mode
Date: Tue, 31 Jan 2023 09:42:09 -0800 [thread overview]
Message-ID: <20230131174209.GA3602823@roeck-us.net> (raw)
In-Reply-To: <20221104070358.426657-3-andrej.picej@norik.com>
On Fri, Nov 04, 2022 at 08:03:57AM +0100, Andrej Picej wrote:
> Property "fsl,suspend-in-wait" suspends watchdog in "WAIT" mode which
> corresponds to Linux's Suspend-to-Idle S0 mode. If this property is not
> set and the device is put into Suspend-to-Idle mode, the watchdog
> triggers a reset after 128 seconds.
>
> Signed-off-by: Andrej Picej <andrej.picej@norik.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> Changes in v4:
> - combine allOf, reorder allOf so it follows example-schema, drop the
> quotes around 'watchdog.yaml'.
>
> Changes in v3:
> - disallow the property for devices which don't support WDW bit
> functionality with .yaml DTS allOf:if:then scheme.
>
> Changes in v2:
> - add a commit message,
> - add a list of devices which support this functionality
> ---
> .../bindings/watchdog/fsl-imx-wdt.yaml | 37 +++++++++++++++++--
> 1 file changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> index fb7695515be1..181f0cc5b5bd 100644
> --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> @@ -9,9 +9,6 @@ title: Freescale i.MX Watchdog Timer (WDT) Controller
> maintainers:
> - Anson Huang <Anson.Huang@nxp.com>
>
> -allOf:
> - - $ref: "watchdog.yaml#"
> -
> properties:
> compatible:
> oneOf:
> @@ -55,11 +52,45 @@ properties:
> If present, the watchdog device is configured to assert its
> external reset (WDOG_B) instead of issuing a software reset.
>
> + fsl,suspend-in-wait:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: |
> + If present, the watchdog device is suspended in WAIT mode
> + (Suspend-to-Idle). Only supported on certain devices.
> +
> required:
> - compatible
> - interrupts
> - reg
>
> +allOf:
> + - $ref: watchdog.yaml#
> + - if:
> + not:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx25-wdt
> + - fsl,imx35-wdt
> + - fsl,imx50-wdt
> + - fsl,imx51-wdt
> + - fsl,imx53-wdt
> + - fsl,imx6q-wdt
> + - fsl,imx6sl-wdt
> + - fsl,imx6sll-wdt
> + - fsl,imx6sx-wdt
> + - fsl,imx6ul-wdt
> + - fsl,imx7d-wdt
> + - fsl,imx8mm-wdt
> + - fsl,imx8mn-wdt
> + - fsl,imx8mp-wdt
> + - fsl,imx8mq-wdt
> + - fsl,vf610-wdt
> + then:
> + properties:
> + fsl,suspend-in-wait: false
> +
> unevaluatedProperties: false
>
> examples:
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: Andrej Picej <andrej.picej@norik.com>
Cc: linux-watchdog@vger.kernel.org, wim@linux-watchdog.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
Anson.Huang@nxp.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/3] dt-bindings: watchdog: fsl-imx: document suspend in wait mode
Date: Tue, 31 Jan 2023 09:42:09 -0800 [thread overview]
Message-ID: <20230131174209.GA3602823@roeck-us.net> (raw)
In-Reply-To: <20221104070358.426657-3-andrej.picej@norik.com>
On Fri, Nov 04, 2022 at 08:03:57AM +0100, Andrej Picej wrote:
> Property "fsl,suspend-in-wait" suspends watchdog in "WAIT" mode which
> corresponds to Linux's Suspend-to-Idle S0 mode. If this property is not
> set and the device is put into Suspend-to-Idle mode, the watchdog
> triggers a reset after 128 seconds.
>
> Signed-off-by: Andrej Picej <andrej.picej@norik.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> Changes in v4:
> - combine allOf, reorder allOf so it follows example-schema, drop the
> quotes around 'watchdog.yaml'.
>
> Changes in v3:
> - disallow the property for devices which don't support WDW bit
> functionality with .yaml DTS allOf:if:then scheme.
>
> Changes in v2:
> - add a commit message,
> - add a list of devices which support this functionality
> ---
> .../bindings/watchdog/fsl-imx-wdt.yaml | 37 +++++++++++++++++--
> 1 file changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> index fb7695515be1..181f0cc5b5bd 100644
> --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
> @@ -9,9 +9,6 @@ title: Freescale i.MX Watchdog Timer (WDT) Controller
> maintainers:
> - Anson Huang <Anson.Huang@nxp.com>
>
> -allOf:
> - - $ref: "watchdog.yaml#"
> -
> properties:
> compatible:
> oneOf:
> @@ -55,11 +52,45 @@ properties:
> If present, the watchdog device is configured to assert its
> external reset (WDOG_B) instead of issuing a software reset.
>
> + fsl,suspend-in-wait:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: |
> + If present, the watchdog device is suspended in WAIT mode
> + (Suspend-to-Idle). Only supported on certain devices.
> +
> required:
> - compatible
> - interrupts
> - reg
>
> +allOf:
> + - $ref: watchdog.yaml#
> + - if:
> + not:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx25-wdt
> + - fsl,imx35-wdt
> + - fsl,imx50-wdt
> + - fsl,imx51-wdt
> + - fsl,imx53-wdt
> + - fsl,imx6q-wdt
> + - fsl,imx6sl-wdt
> + - fsl,imx6sll-wdt
> + - fsl,imx6sx-wdt
> + - fsl,imx6ul-wdt
> + - fsl,imx7d-wdt
> + - fsl,imx8mm-wdt
> + - fsl,imx8mn-wdt
> + - fsl,imx8mp-wdt
> + - fsl,imx8mq-wdt
> + - fsl,vf610-wdt
> + then:
> + properties:
> + fsl,suspend-in-wait: false
> +
> unevaluatedProperties: false
>
> examples:
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-31 17:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-04 7:03 [PATCH v4 0/3] Suspending i.MX watchdog in WAIT mode Andrej Picej
2022-11-04 7:03 ` Andrej Picej
2022-11-04 7:03 ` [PATCH v4 1/3] watchdog: imx2_wdg: suspend " Andrej Picej
2022-11-04 7:03 ` Andrej Picej
2022-11-04 7:03 ` [PATCH v4 2/3] dt-bindings: watchdog: fsl-imx: document suspend in wait mode Andrej Picej
2022-11-04 7:03 ` Andrej Picej
2022-11-08 10:59 ` Krzysztof Kozlowski
2022-11-08 10:59 ` Krzysztof Kozlowski
2023-01-31 17:42 ` Guenter Roeck [this message]
2023-01-31 17:42 ` Guenter Roeck
2022-11-04 7:03 ` [PATCH v4 3/3] ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog " Andrej Picej
2022-11-04 7:03 ` Andrej Picej
2022-11-11 6:45 ` Shawn Guo
2022-11-11 6:45 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230131174209.GA3602823@roeck-us.net \
--to=linux@roeck-us.net \
--cc=Anson.Huang@nxp.com \
--cc=andrej.picej@norik.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.