From: Eric DeVolder <eric.devolder@oracle.com>
To: linux-kernel@vger.kernel.org, x86@kernel.org,
kexec@lists.infradead.org, ebiederm@xmission.com,
dyoung@redhat.com, bhe@redhat.com, vgoyal@redhat.com
Cc: tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
dave.hansen@linux.intel.com, hpa@zytor.com,
nramas@linux.microsoft.com, thomas.lendacky@amd.com,
robh@kernel.org, efault@gmx.de, rppt@kernel.org,
david@redhat.com, sourabhjain@linux.ibm.com,
konrad.wilk@oracle.com, boris.ostrovsky@oracle.com,
eric.devolder@oracle.com
Subject: [PATCH v18 7/7] x86/crash: add x86 crash hotplug support
Date: Tue, 31 Jan 2023 17:42:36 -0500 [thread overview]
Message-ID: <20230131224236.122805-8-eric.devolder@oracle.com> (raw)
In-Reply-To: <20230131224236.122805-1-eric.devolder@oracle.com>
When CPU or memory is hot un/plugged, or off/onlined, the crash
elfcorehdr, which describes the CPUs and memory in the system,
must also be updated.
The segment containing the elfcorehdr is identified at run-time
in crash_core:handle_hotplug_event(), which works for both the
kexec_load() and kexec_file_load() syscalls. A new elfcorehdr
is generated from the available CPUs and memory into a buffer,
and then installed over the top of the existing elfcorehdr.
In the patch 'kexec: exclude elfcorehdr from the segment digest'
the need to update purgatory due to the change in elfcorehdr was
eliminated. As a result, no changes to purgatory or boot_params
(as the elfcorehdr= kernel command line parameter pointer
remains unchanged and correct) are needed, just elfcorehdr.
To accommodate a growing number of resources via hotplug, the
elfcorehdr segment must be sufficiently large enough to accommodate
changes, see the CRASH_MAX_MEMORY_RANGES description. This is used
only on the kexec_file_load() syscall; for kexec_load() userspace
will need to size the segment similarly.
To accommodate kexec_load() syscall in the absence of
kexec_file_load() syscall support, and with CONFIG_CRASH_HOTPLUG
enabled, it is necessary to move prepare_elf_headers() and
dependents outside of CONFIG_KEXEC_FILE.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
---
arch/x86/Kconfig | 13 ++++
arch/x86/include/asm/kexec.h | 15 +++++
arch/x86/kernel/crash.c | 122 +++++++++++++++++++++++++++++++++--
3 files changed, 143 insertions(+), 7 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3604074a878b..2ca5e19b8f19 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2119,6 +2119,19 @@ config CRASH_DUMP
(CONFIG_RELOCATABLE=y).
For more details see Documentation/admin-guide/kdump/kdump.rst
+config CRASH_HOTPLUG
+ bool "Update the crash elfcorehdr on system configuration changes"
+ default n
+ depends on CRASH_DUMP && (HOTPLUG_CPU || MEMORY_HOTPLUG)
+ help
+ Enable direct update to the crash elfcorehdr (which contains
+ the list of CPUs and memory regions to be dumped upon a crash)
+ in response to hot plug/unplug or online/offline of CPUs or
+ memory. This is a much more advanced approach than userspace
+ attempting that.
+
+ If unsure, say Y.
+
config KEXEC_JUMP
bool "kexec jump"
depends on KEXEC && HIBERNATION
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index a3760ca796aa..1bc852ce347d 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -212,6 +212,21 @@ typedef void crash_vmclear_fn(void);
extern crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss;
extern void kdump_nmi_shootdown_cpus(void);
+#ifdef CONFIG_CRASH_HOTPLUG
+void arch_crash_handle_hotplug_event(struct kimage *image);
+#define arch_crash_handle_hotplug_event arch_crash_handle_hotplug_event
+
+#ifdef CONFIG_HOTPLUG_CPU
+static inline int crash_hotplug_cpu_support(void) { return 1; }
+#define crash_hotplug_cpu_support crash_hotplug_cpu_support
+#endif
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static inline int crash_hotplug_memory_support(void) { return 1; }
+#define crash_hotplug_memory_support crash_hotplug_memory_support
+#endif
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_KEXEC_H */
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 8a9bc9807813..5c9e01fe27f5 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -42,6 +42,21 @@
#include <asm/crash.h>
#include <asm/cmdline.h>
+/*
+ * For the kexec_file_load() syscall path, specify the maximum number of
+ * memory regions that the elfcorehdr buffer/segment can accommodate.
+ * These regions are obtained via walk_system_ram_res(); eg. the
+ * 'System RAM' entries in /proc/iomem.
+ * This value is combined with NR_CPUS_DEFAULT and multiplied by
+ * sizeof(Elf64_Phdr) to determine the final elfcorehdr memory buffer/
+ * segment size.
+ * The value 8192, for example, covers a (sparsely populated) 1TiB system
+ * consisting of 128MiB memblocks, while resulting in an elfcorehdr
+ * memory buffer/segment size under 1MiB. This represents a sane choice
+ * to accommodate both baremetal and virtual machine configurations.
+ */
+#define CRASH_MAX_MEMORY_RANGES 8192
+
/* Used while preparing memory map entries for second kernel */
struct crash_memmap_data {
struct boot_params *params;
@@ -173,8 +188,6 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
crash_save_cpu(regs, safe_smp_processor_id());
}
-#ifdef CONFIG_KEXEC_FILE
-
static int get_nr_ram_ranges_callback(struct resource *res, void *arg)
{
unsigned int *nr_ranges = arg;
@@ -246,7 +259,7 @@ static int prepare_elf64_ram_headers_callback(struct resource *res, void *arg)
/* Prepare elf headers. Return addr and size */
static int prepare_elf_headers(struct kimage *image, void **addr,
- unsigned long *sz)
+ unsigned long *sz, unsigned long *nr_mem_ranges)
{
struct crash_mem *cmem;
int ret;
@@ -264,6 +277,9 @@ static int prepare_elf_headers(struct kimage *image, void **addr,
if (ret)
goto out;
+ /* Return the computed number of memory ranges, for hotplug usage */
+ *nr_mem_ranges = cmem->nr_ranges;
+
/* By default prepare 64bit headers */
ret = crash_prepare_elf64_headers(image, cmem, IS_ENABLED(CONFIG_X86_64), addr, sz);
@@ -272,6 +288,7 @@ static int prepare_elf_headers(struct kimage *image, void **addr,
return ret;
}
+#ifdef CONFIG_KEXEC_FILE
static int add_e820_entry(struct boot_params *params, struct e820_entry *entry)
{
unsigned int nr_e820_entries;
@@ -386,18 +403,45 @@ int crash_setup_memmap_entries(struct kimage *image, struct boot_params *params)
int crash_load_segments(struct kimage *image)
{
int ret;
+ unsigned long nr_mem_ranges;
struct kexec_buf kbuf = { .image = image, .buf_min = 0,
.buf_max = ULONG_MAX, .top_down = false };
/* Prepare elf headers and add a segment */
- ret = prepare_elf_headers(image, &kbuf.buffer, &kbuf.bufsz);
+ ret = prepare_elf_headers(image, &kbuf.buffer, &kbuf.bufsz, &nr_mem_ranges);
if (ret)
return ret;
- image->elf_headers = kbuf.buffer;
- image->elf_headers_sz = kbuf.bufsz;
+ image->elf_headers = kbuf.buffer;
+ image->elf_headers_sz = kbuf.bufsz;
+ kbuf.memsz = kbuf.bufsz;
+
+ if (IS_ENABLED(CONFIG_CRASH_HOTPLUG)) {
+ /*
+ * Ensure the elfcorehdr segment large enough for hotplug changes.
+ * Start with VMCOREINFO and kernel_map and maximum CPUs.
+ */
+ unsigned long pnum = 2 + CONFIG_NR_CPUS_DEFAULT;
+
+ if (IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
+ pnum += CRASH_MAX_MEMORY_RANGES;
+ else
+ pnum += nr_mem_ranges;
+
+ if (pnum < (unsigned long)PN_XNUM) {
+ kbuf.memsz = pnum * sizeof(Elf64_Phdr);
+ kbuf.memsz += sizeof(Elf64_Ehdr);
+
+ image->elfcorehdr_index = image->nr_segments;
+ image->elfcorehdr_index_valid = true;
+
+ /* Mark as usable to crash kernel, else crash kernel fails on boot */
+ image->elf_headers_sz = kbuf.memsz;
+ } else {
+ pr_err("number of Phdrs %lu exceeds max\n", pnum);
+ }
+ }
- kbuf.memsz = kbuf.bufsz;
kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
ret = kexec_add_buffer(&kbuf);
@@ -410,3 +454,67 @@ int crash_load_segments(struct kimage *image)
return ret;
}
#endif /* CONFIG_KEXEC_FILE */
+
+#ifdef CONFIG_CRASH_HOTPLUG
+
+#undef pr_fmt
+#define pr_fmt(fmt) "crash hp: " fmt
+
+/**
+ * arch_crash_handle_hotplug_event() - Handle hotplug elfcorehdr changes
+ * @image: the active struct kimage
+ *
+ * The new elfcorehdr is prepared in a kernel buffer, and then it is
+ * written on top of the existing/old elfcorehdr.
+ */
+void arch_crash_handle_hotplug_event(struct kimage *image)
+{
+ void *elfbuf = NULL, *old_elfcorehdr;
+ unsigned long nr_mem_ranges;
+ unsigned long mem, memsz;
+ unsigned long elfsz = 0;
+
+ /*
+ * Create the new elfcorehdr reflecting the changes to CPU and/or
+ * memory resources.
+ */
+ if (prepare_elf_headers(image, &elfbuf, &elfsz, &nr_mem_ranges)) {
+ pr_err("unable to prepare elfcore headers");
+ goto out;
+ }
+
+ /*
+ * Obtain address and size of the elfcorehdr segment, and
+ * check it against the new elfcorehdr buffer.
+ */
+ mem = image->segment[image->elfcorehdr_index].mem;
+ memsz = image->segment[image->elfcorehdr_index].memsz;
+ if (elfsz > memsz) {
+ pr_err("update elfcorehdr elfsz %lu > memsz %lu",
+ elfsz, memsz);
+ goto out;
+ }
+
+ /*
+ * Copy new elfcorehdr over the old elfcorehdr at destination.
+ */
+ old_elfcorehdr = kmap_local_page(pfn_to_page(mem >> PAGE_SHIFT));
+ if (!old_elfcorehdr) {
+ pr_err("updating elfcorehdr failed\n");
+ goto out;
+ }
+
+ /*
+ * Temporarily invalidate the crash image while the
+ * elfcorehdr is updated.
+ */
+ xchg(&kexec_crash_image, NULL);
+ memcpy_flushcache(old_elfcorehdr, elfbuf, elfsz);
+ xchg(&kexec_crash_image, image);
+ kunmap_local(old_elfcorehdr);
+ pr_debug("updated elfcorehdr\n");
+
+out:
+ vfree(elfbuf);
+}
+#endif
--
2.31.1
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
WARNING: multiple messages have this Message-ID (diff)
From: Eric DeVolder <eric.devolder@oracle.com>
To: linux-kernel@vger.kernel.org, x86@kernel.org,
kexec@lists.infradead.org, ebiederm@xmission.com,
dyoung@redhat.com, bhe@redhat.com, vgoyal@redhat.com
Cc: tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
dave.hansen@linux.intel.com, hpa@zytor.com,
nramas@linux.microsoft.com, thomas.lendacky@amd.com,
robh@kernel.org, efault@gmx.de, rppt@kernel.org,
david@redhat.com, sourabhjain@linux.ibm.com,
konrad.wilk@oracle.com, boris.ostrovsky@oracle.com,
eric.devolder@oracle.com
Subject: [PATCH v18 7/7] x86/crash: add x86 crash hotplug support
Date: Tue, 31 Jan 2023 17:42:36 -0500 [thread overview]
Message-ID: <20230131224236.122805-8-eric.devolder@oracle.com> (raw)
In-Reply-To: <20230131224236.122805-1-eric.devolder@oracle.com>
When CPU or memory is hot un/plugged, or off/onlined, the crash
elfcorehdr, which describes the CPUs and memory in the system,
must also be updated.
The segment containing the elfcorehdr is identified at run-time
in crash_core:handle_hotplug_event(), which works for both the
kexec_load() and kexec_file_load() syscalls. A new elfcorehdr
is generated from the available CPUs and memory into a buffer,
and then installed over the top of the existing elfcorehdr.
In the patch 'kexec: exclude elfcorehdr from the segment digest'
the need to update purgatory due to the change in elfcorehdr was
eliminated. As a result, no changes to purgatory or boot_params
(as the elfcorehdr= kernel command line parameter pointer
remains unchanged and correct) are needed, just elfcorehdr.
To accommodate a growing number of resources via hotplug, the
elfcorehdr segment must be sufficiently large enough to accommodate
changes, see the CRASH_MAX_MEMORY_RANGES description. This is used
only on the kexec_file_load() syscall; for kexec_load() userspace
will need to size the segment similarly.
To accommodate kexec_load() syscall in the absence of
kexec_file_load() syscall support, and with CONFIG_CRASH_HOTPLUG
enabled, it is necessary to move prepare_elf_headers() and
dependents outside of CONFIG_KEXEC_FILE.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
---
arch/x86/Kconfig | 13 ++++
arch/x86/include/asm/kexec.h | 15 +++++
arch/x86/kernel/crash.c | 122 +++++++++++++++++++++++++++++++++--
3 files changed, 143 insertions(+), 7 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3604074a878b..2ca5e19b8f19 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2119,6 +2119,19 @@ config CRASH_DUMP
(CONFIG_RELOCATABLE=y).
For more details see Documentation/admin-guide/kdump/kdump.rst
+config CRASH_HOTPLUG
+ bool "Update the crash elfcorehdr on system configuration changes"
+ default n
+ depends on CRASH_DUMP && (HOTPLUG_CPU || MEMORY_HOTPLUG)
+ help
+ Enable direct update to the crash elfcorehdr (which contains
+ the list of CPUs and memory regions to be dumped upon a crash)
+ in response to hot plug/unplug or online/offline of CPUs or
+ memory. This is a much more advanced approach than userspace
+ attempting that.
+
+ If unsure, say Y.
+
config KEXEC_JUMP
bool "kexec jump"
depends on KEXEC && HIBERNATION
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index a3760ca796aa..1bc852ce347d 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -212,6 +212,21 @@ typedef void crash_vmclear_fn(void);
extern crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss;
extern void kdump_nmi_shootdown_cpus(void);
+#ifdef CONFIG_CRASH_HOTPLUG
+void arch_crash_handle_hotplug_event(struct kimage *image);
+#define arch_crash_handle_hotplug_event arch_crash_handle_hotplug_event
+
+#ifdef CONFIG_HOTPLUG_CPU
+static inline int crash_hotplug_cpu_support(void) { return 1; }
+#define crash_hotplug_cpu_support crash_hotplug_cpu_support
+#endif
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static inline int crash_hotplug_memory_support(void) { return 1; }
+#define crash_hotplug_memory_support crash_hotplug_memory_support
+#endif
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_KEXEC_H */
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 8a9bc9807813..5c9e01fe27f5 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -42,6 +42,21 @@
#include <asm/crash.h>
#include <asm/cmdline.h>
+/*
+ * For the kexec_file_load() syscall path, specify the maximum number of
+ * memory regions that the elfcorehdr buffer/segment can accommodate.
+ * These regions are obtained via walk_system_ram_res(); eg. the
+ * 'System RAM' entries in /proc/iomem.
+ * This value is combined with NR_CPUS_DEFAULT and multiplied by
+ * sizeof(Elf64_Phdr) to determine the final elfcorehdr memory buffer/
+ * segment size.
+ * The value 8192, for example, covers a (sparsely populated) 1TiB system
+ * consisting of 128MiB memblocks, while resulting in an elfcorehdr
+ * memory buffer/segment size under 1MiB. This represents a sane choice
+ * to accommodate both baremetal and virtual machine configurations.
+ */
+#define CRASH_MAX_MEMORY_RANGES 8192
+
/* Used while preparing memory map entries for second kernel */
struct crash_memmap_data {
struct boot_params *params;
@@ -173,8 +188,6 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
crash_save_cpu(regs, safe_smp_processor_id());
}
-#ifdef CONFIG_KEXEC_FILE
-
static int get_nr_ram_ranges_callback(struct resource *res, void *arg)
{
unsigned int *nr_ranges = arg;
@@ -246,7 +259,7 @@ static int prepare_elf64_ram_headers_callback(struct resource *res, void *arg)
/* Prepare elf headers. Return addr and size */
static int prepare_elf_headers(struct kimage *image, void **addr,
- unsigned long *sz)
+ unsigned long *sz, unsigned long *nr_mem_ranges)
{
struct crash_mem *cmem;
int ret;
@@ -264,6 +277,9 @@ static int prepare_elf_headers(struct kimage *image, void **addr,
if (ret)
goto out;
+ /* Return the computed number of memory ranges, for hotplug usage */
+ *nr_mem_ranges = cmem->nr_ranges;
+
/* By default prepare 64bit headers */
ret = crash_prepare_elf64_headers(image, cmem, IS_ENABLED(CONFIG_X86_64), addr, sz);
@@ -272,6 +288,7 @@ static int prepare_elf_headers(struct kimage *image, void **addr,
return ret;
}
+#ifdef CONFIG_KEXEC_FILE
static int add_e820_entry(struct boot_params *params, struct e820_entry *entry)
{
unsigned int nr_e820_entries;
@@ -386,18 +403,45 @@ int crash_setup_memmap_entries(struct kimage *image, struct boot_params *params)
int crash_load_segments(struct kimage *image)
{
int ret;
+ unsigned long nr_mem_ranges;
struct kexec_buf kbuf = { .image = image, .buf_min = 0,
.buf_max = ULONG_MAX, .top_down = false };
/* Prepare elf headers and add a segment */
- ret = prepare_elf_headers(image, &kbuf.buffer, &kbuf.bufsz);
+ ret = prepare_elf_headers(image, &kbuf.buffer, &kbuf.bufsz, &nr_mem_ranges);
if (ret)
return ret;
- image->elf_headers = kbuf.buffer;
- image->elf_headers_sz = kbuf.bufsz;
+ image->elf_headers = kbuf.buffer;
+ image->elf_headers_sz = kbuf.bufsz;
+ kbuf.memsz = kbuf.bufsz;
+
+ if (IS_ENABLED(CONFIG_CRASH_HOTPLUG)) {
+ /*
+ * Ensure the elfcorehdr segment large enough for hotplug changes.
+ * Start with VMCOREINFO and kernel_map and maximum CPUs.
+ */
+ unsigned long pnum = 2 + CONFIG_NR_CPUS_DEFAULT;
+
+ if (IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
+ pnum += CRASH_MAX_MEMORY_RANGES;
+ else
+ pnum += nr_mem_ranges;
+
+ if (pnum < (unsigned long)PN_XNUM) {
+ kbuf.memsz = pnum * sizeof(Elf64_Phdr);
+ kbuf.memsz += sizeof(Elf64_Ehdr);
+
+ image->elfcorehdr_index = image->nr_segments;
+ image->elfcorehdr_index_valid = true;
+
+ /* Mark as usable to crash kernel, else crash kernel fails on boot */
+ image->elf_headers_sz = kbuf.memsz;
+ } else {
+ pr_err("number of Phdrs %lu exceeds max\n", pnum);
+ }
+ }
- kbuf.memsz = kbuf.bufsz;
kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
ret = kexec_add_buffer(&kbuf);
@@ -410,3 +454,67 @@ int crash_load_segments(struct kimage *image)
return ret;
}
#endif /* CONFIG_KEXEC_FILE */
+
+#ifdef CONFIG_CRASH_HOTPLUG
+
+#undef pr_fmt
+#define pr_fmt(fmt) "crash hp: " fmt
+
+/**
+ * arch_crash_handle_hotplug_event() - Handle hotplug elfcorehdr changes
+ * @image: the active struct kimage
+ *
+ * The new elfcorehdr is prepared in a kernel buffer, and then it is
+ * written on top of the existing/old elfcorehdr.
+ */
+void arch_crash_handle_hotplug_event(struct kimage *image)
+{
+ void *elfbuf = NULL, *old_elfcorehdr;
+ unsigned long nr_mem_ranges;
+ unsigned long mem, memsz;
+ unsigned long elfsz = 0;
+
+ /*
+ * Create the new elfcorehdr reflecting the changes to CPU and/or
+ * memory resources.
+ */
+ if (prepare_elf_headers(image, &elfbuf, &elfsz, &nr_mem_ranges)) {
+ pr_err("unable to prepare elfcore headers");
+ goto out;
+ }
+
+ /*
+ * Obtain address and size of the elfcorehdr segment, and
+ * check it against the new elfcorehdr buffer.
+ */
+ mem = image->segment[image->elfcorehdr_index].mem;
+ memsz = image->segment[image->elfcorehdr_index].memsz;
+ if (elfsz > memsz) {
+ pr_err("update elfcorehdr elfsz %lu > memsz %lu",
+ elfsz, memsz);
+ goto out;
+ }
+
+ /*
+ * Copy new elfcorehdr over the old elfcorehdr at destination.
+ */
+ old_elfcorehdr = kmap_local_page(pfn_to_page(mem >> PAGE_SHIFT));
+ if (!old_elfcorehdr) {
+ pr_err("updating elfcorehdr failed\n");
+ goto out;
+ }
+
+ /*
+ * Temporarily invalidate the crash image while the
+ * elfcorehdr is updated.
+ */
+ xchg(&kexec_crash_image, NULL);
+ memcpy_flushcache(old_elfcorehdr, elfbuf, elfsz);
+ xchg(&kexec_crash_image, image);
+ kunmap_local(old_elfcorehdr);
+ pr_debug("updated elfcorehdr\n");
+
+out:
+ vfree(elfbuf);
+}
+#endif
--
2.31.1
next prev parent reply other threads:[~2023-01-31 22:43 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-31 22:42 [PATCH v18 0/7] crash: Kernel handling of CPU and memory hot un/plug Eric DeVolder
2023-01-31 22:42 ` Eric DeVolder
2023-01-31 22:42 ` [PATCH v18 1/7] crash: move a few code bits to setup support of crash hotplug Eric DeVolder
2023-01-31 22:42 ` Eric DeVolder
2023-01-31 22:42 ` [PATCH v18 2/7] crash: prototype change for crash_prepare_elf64_headers() Eric DeVolder
2023-01-31 22:42 ` Eric DeVolder
2023-01-31 22:42 ` [PATCH v18 3/7] crash: add generic infrastructure for crash hotplug support Eric DeVolder
2023-01-31 22:42 ` Eric DeVolder
2023-02-09 19:10 ` Sourabh Jain
2023-02-09 19:10 ` Sourabh Jain
2023-02-10 16:51 ` Eric DeVolder
2023-02-10 16:51 ` Eric DeVolder
2023-01-31 22:42 ` [PATCH v18 4/7] kexec: exclude elfcorehdr from the segment digest Eric DeVolder
2023-01-31 22:42 ` Eric DeVolder
2023-01-31 22:42 ` [PATCH v18 5/7] kexec: exclude hot remove cpu from elfcorehdr notes Eric DeVolder
2023-01-31 22:42 ` Eric DeVolder
2023-02-01 11:33 ` Thomas Gleixner
2023-02-01 11:33 ` Thomas Gleixner
2023-02-06 8:12 ` Sourabh Jain
2023-02-06 8:12 ` Sourabh Jain
2023-02-06 13:03 ` Thomas Gleixner
2023-02-06 13:03 ` Thomas Gleixner
2023-02-07 17:23 ` Eric DeVolder
2023-02-07 17:23 ` Eric DeVolder
2023-02-08 13:44 ` Thomas Gleixner
2023-02-08 13:44 ` Thomas Gleixner
2023-02-09 17:31 ` Eric DeVolder
2023-02-09 17:31 ` Eric DeVolder
2023-02-09 18:43 ` Sourabh Jain
2023-02-09 18:43 ` Sourabh Jain
2023-02-09 19:39 ` Eric DeVolder
2023-02-09 19:39 ` Eric DeVolder
2023-02-10 6:29 ` Sourabh Jain
2023-02-10 6:29 ` Sourabh Jain
2023-02-11 0:35 ` Eric DeVolder
2023-02-11 0:35 ` Eric DeVolder
2023-02-13 4:40 ` Sourabh Jain
2023-02-13 4:40 ` Sourabh Jain
2023-02-13 12:52 ` Thomas Gleixner
2023-02-13 12:52 ` Thomas Gleixner
2023-02-15 2:53 ` Sourabh Jain
2023-02-15 2:53 ` Sourabh Jain
2023-02-28 12:44 ` Baoquan He
2023-02-28 12:44 ` Baoquan He
2023-02-28 18:52 ` Eric DeVolder
2023-02-28 18:52 ` Eric DeVolder
2023-03-01 15:48 ` Eric DeVolder
2023-03-01 15:48 ` Eric DeVolder
2023-03-02 10:51 ` Baoquan He
2023-03-02 10:51 ` Baoquan He
2023-03-02 5:23 ` Sourabh Jain
2023-03-02 5:23 ` Sourabh Jain
2023-02-23 20:34 ` Eric DeVolder
2023-02-23 20:34 ` Eric DeVolder
2023-02-24 8:34 ` Sourabh Jain
2023-02-24 8:34 ` Sourabh Jain
2023-02-24 20:16 ` Eric DeVolder
2023-02-24 20:16 ` Eric DeVolder
2023-02-27 6:11 ` Sourabh Jain
2023-02-27 6:11 ` Sourabh Jain
2023-02-28 21:50 ` Eric DeVolder
2023-02-28 21:50 ` Eric DeVolder
2023-03-01 6:22 ` Sourabh Jain
2023-03-01 6:22 ` Sourabh Jain
2023-03-01 14:16 ` Eric DeVolder
2023-03-01 14:16 ` Eric DeVolder
2023-01-31 22:42 ` [PATCH v18 6/7] crash: memory and cpu hotplug sysfs attributes Eric DeVolder
2023-01-31 22:42 ` Eric DeVolder
2023-01-31 22:42 ` Eric DeVolder [this message]
2023-01-31 22:42 ` [PATCH v18 7/7] x86/crash: add x86 crash hotplug support Eric DeVolder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230131224236.122805-8-eric.devolder@oracle.com \
--to=eric.devolder@oracle.com \
--cc=bhe@redhat.com \
--cc=boris.ostrovsky@oracle.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=david@redhat.com \
--cc=dyoung@redhat.com \
--cc=ebiederm@xmission.com \
--cc=efault@gmx.de \
--cc=hpa@zytor.com \
--cc=kexec@lists.infradead.org \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=nramas@linux.microsoft.com \
--cc=robh@kernel.org \
--cc=rppt@kernel.org \
--cc=sourabhjain@linux.ibm.com \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=vgoyal@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.