From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: andersson@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, arnaud.pouliquen@foss.st.com,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-remoteproc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>,
iuliana.prodan@nxp.com, daniel.baluta@nxp.com
Subject: Re: [PATCH V2 2/6] remoteproc: imx_rproc: add devtype
Date: Thu, 2 Feb 2023 14:40:54 -0700 [thread overview]
Message-ID: <20230202214054.GB1147631@p14s> (raw)
In-Reply-To: <20230127092246.1470865-3-peng.fan@oss.nxp.com>
On Fri, Jan 27, 2023 at 05:22:42PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Add i.MX8M and i.MX93 devtype which will be used when parsing the
> firmware.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 3 +++
> drivers/remoteproc/imx_rproc.h | 6 ++++++
> 2 files changed, 9 insertions(+)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 9fc978e0393c..8a282fb67a4d 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -289,6 +289,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn = {
> .att = imx_rproc_att_imx8mn,
> .att_size = ARRAY_SIZE(imx_rproc_att_imx8mn),
> .method = IMX_RPROC_SMC,
> + .devtype = IMX_RPROC_IMX8M,
> };
>
> static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
> @@ -299,6 +300,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
> .att = imx_rproc_att_imx8mq,
> .att_size = ARRAY_SIZE(imx_rproc_att_imx8mq),
> .method = IMX_RPROC_MMIO,
> + .devtype = IMX_RPROC_IMX8M,
> };
>
> static const struct imx_rproc_dcfg imx_rproc_cfg_imx8qm = {
> @@ -349,6 +351,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx93 = {
> .att = imx_rproc_att_imx93,
> .att_size = ARRAY_SIZE(imx_rproc_att_imx93),
> .method = IMX_RPROC_SMC,
> + .devtype = IMX_RPROC_IMX93,
> };
>
> static int imx_rproc_start(struct rproc *rproc)
> diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
> index 1c7e2127c758..43b105ff0175 100644
> --- a/drivers/remoteproc/imx_rproc.h
> +++ b/drivers/remoteproc/imx_rproc.h
> @@ -26,6 +26,11 @@ enum imx_rproc_method {
> IMX_RPROC_SCU_API,
> };
>
> +enum imx_rproc_devtype {
> + IMX_RPROC_IMX8M,
> + IMX_RPROC_IMX93,
> +};
> +
enum imx_rproc_devtype {
IMX_RPROC_ANY,
IMX_RPROC_IMX8M,
IMX_RPROC_IMX93,
};
That way all the other boards entries where @devtype isn't specified don't
default to IMX_RPROC_IMX8M.
> struct imx_rproc_dcfg {
> u32 src_reg;
> u32 src_mask;
> @@ -34,6 +39,7 @@ struct imx_rproc_dcfg {
> const struct imx_rproc_att *att;
> size_t att_size;
> enum imx_rproc_method method;
> + enum imx_rproc_devtype devtype;
> };
>
> #endif /* _IMX_RPROC_H */
> --
> 2.37.1
>
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: andersson@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, arnaud.pouliquen@foss.st.com,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-remoteproc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>,
iuliana.prodan@nxp.com, daniel.baluta@nxp.com
Subject: Re: [PATCH V2 2/6] remoteproc: imx_rproc: add devtype
Date: Thu, 2 Feb 2023 14:40:54 -0700 [thread overview]
Message-ID: <20230202214054.GB1147631@p14s> (raw)
In-Reply-To: <20230127092246.1470865-3-peng.fan@oss.nxp.com>
On Fri, Jan 27, 2023 at 05:22:42PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Add i.MX8M and i.MX93 devtype which will be used when parsing the
> firmware.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 3 +++
> drivers/remoteproc/imx_rproc.h | 6 ++++++
> 2 files changed, 9 insertions(+)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 9fc978e0393c..8a282fb67a4d 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -289,6 +289,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn = {
> .att = imx_rproc_att_imx8mn,
> .att_size = ARRAY_SIZE(imx_rproc_att_imx8mn),
> .method = IMX_RPROC_SMC,
> + .devtype = IMX_RPROC_IMX8M,
> };
>
> static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
> @@ -299,6 +300,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
> .att = imx_rproc_att_imx8mq,
> .att_size = ARRAY_SIZE(imx_rproc_att_imx8mq),
> .method = IMX_RPROC_MMIO,
> + .devtype = IMX_RPROC_IMX8M,
> };
>
> static const struct imx_rproc_dcfg imx_rproc_cfg_imx8qm = {
> @@ -349,6 +351,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx93 = {
> .att = imx_rproc_att_imx93,
> .att_size = ARRAY_SIZE(imx_rproc_att_imx93),
> .method = IMX_RPROC_SMC,
> + .devtype = IMX_RPROC_IMX93,
> };
>
> static int imx_rproc_start(struct rproc *rproc)
> diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
> index 1c7e2127c758..43b105ff0175 100644
> --- a/drivers/remoteproc/imx_rproc.h
> +++ b/drivers/remoteproc/imx_rproc.h
> @@ -26,6 +26,11 @@ enum imx_rproc_method {
> IMX_RPROC_SCU_API,
> };
>
> +enum imx_rproc_devtype {
> + IMX_RPROC_IMX8M,
> + IMX_RPROC_IMX93,
> +};
> +
enum imx_rproc_devtype {
IMX_RPROC_ANY,
IMX_RPROC_IMX8M,
IMX_RPROC_IMX93,
};
That way all the other boards entries where @devtype isn't specified don't
default to IMX_RPROC_IMX8M.
> struct imx_rproc_dcfg {
> u32 src_reg;
> u32 src_mask;
> @@ -34,6 +39,7 @@ struct imx_rproc_dcfg {
> const struct imx_rproc_att *att;
> size_t att_size;
> enum imx_rproc_method method;
> + enum imx_rproc_devtype devtype;
> };
>
> #endif /* _IMX_RPROC_H */
> --
> 2.37.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-02-02 21:41 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-27 9:22 [PATCH V2 0/6] remoteproc: imx_rproc: support firmware in DDR Peng Fan (OSS)
2023-01-27 9:22 ` Peng Fan (OSS)
2023-01-27 9:22 ` [PATCH V2 1/6] remoteproc: elf_loader: introduce rproc_elf_find_shdr Peng Fan (OSS)
2023-01-27 9:22 ` Peng Fan (OSS)
2023-01-27 9:22 ` [PATCH V2 2/6] remoteproc: imx_rproc: add devtype Peng Fan (OSS)
2023-01-27 9:22 ` Peng Fan (OSS)
2023-02-02 21:40 ` Mathieu Poirier [this message]
2023-02-02 21:40 ` Mathieu Poirier
2023-01-27 9:22 ` [PATCH V2 3/6] remoteproc: imx_rproc: correct i.MX8MQ DDR Code alias mapping Peng Fan (OSS)
2023-01-27 9:22 ` Peng Fan (OSS)
2023-01-27 9:22 ` [PATCH V2 4/6] remoteproc: imx_rproc: force pointer type Peng Fan (OSS)
2023-01-27 9:22 ` Peng Fan (OSS)
2023-01-27 9:22 ` [PATCH V2 5/6] remoteproc: imx_rproc: set Cortex-M stack/pc to TCML Peng Fan (OSS)
2023-01-27 9:22 ` Peng Fan (OSS)
2023-02-02 21:56 ` Mathieu Poirier
2023-02-02 21:56 ` Mathieu Poirier
2023-02-03 0:04 ` Peng Fan
2023-02-03 0:04 ` Peng Fan
2023-02-13 18:04 ` Mathieu Poirier
2023-02-13 18:04 ` Mathieu Poirier
2023-02-03 12:47 ` Daniel Baluta
2023-02-03 12:47 ` Daniel Baluta
2023-02-03 12:50 ` Peng Fan
2023-02-03 12:50 ` Peng Fan
2023-01-27 9:22 ` [PATCH V2 6/6] remoteproc: imx_rproc: set address of .interrupts section as bootaddr Peng Fan (OSS)
2023-01-27 9:22 ` Peng Fan (OSS)
2023-02-02 22:05 ` Mathieu Poirier
2023-02-02 22:05 ` Mathieu Poirier
2023-02-03 0:12 ` Peng Fan
2023-02-03 0:12 ` Peng Fan
2023-02-03 12:49 ` [PATCH V2 0/6] remoteproc: imx_rproc: support firmware in DDR Daniel Baluta
2023-02-03 12:49 ` Daniel Baluta
2023-02-03 12:55 ` Peng Fan
2023-02-03 12:55 ` Peng Fan
2023-02-03 13:03 ` Daniel Baluta
2023-02-03 13:03 ` Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230202214054.GB1147631@p14s \
--to=mathieu.poirier@linaro.org \
--cc=andersson@kernel.org \
--cc=arnaud.pouliquen@foss.st.com \
--cc=daniel.baluta@nxp.com \
--cc=festevam@gmail.com \
--cc=iuliana.prodan@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.