From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-gpio@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Andreas Schwab <schwab@suse.de>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
Jianlong Huang <jianlong.huang@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 0/4] Basic pinctrl support for StarFive JH7110 RISC-V SoC
Date: Fri, 3 Feb 2023 22:17:57 +0800 [thread overview]
Message-ID: <20230203141801.59083-1-hal.feng@starfivetech.com> (raw)
This patch series adds basic pinctrl support for StarFive JH7110 SoC.
Changes since v3:
- Rebased on Linus's "devel" branch of linux-pinctrl repo, which was based on
on tag v6.2-rc1.
- Dropped patch 1.
Patch 2 & 3:
- Added a reference for '-pins$' patternProperties.
- Put "additionalProperties: false" before properties section. (by Rob)
- Improved the description.
- Changed the node name in examples from "gpio" to "pinctrl".
Patch 4:
- Added some missing headers. (by Andreas)
v3: https://lore.kernel.org/all/20221220005529.34744-1-hal.feng@starfivetech.com/
Changes since v2:
- Rebased on tag v6.1.
Patch 1:
- Renamed pinctrl-starfive-jh7110.h to
starfive,jh7110-pinctrl.h. (by Krzysztof)
- Separated the register values in the binding header and stored them in
a new file arch/riscv/boot/dts/starfive/jh7110-pinfunc.h. (by Krzysztof)
- Split patch 1 into sys part and aon part. Merged them into patch 2
and patch 3 respectively.
Patch 2 & 3:
- Dropped "reg-names" and the description of "interrupts". Dropped quotes
behind "$ref" and kept consisitent quotes. (by Krzysztof)
- Moved gpio properties behind interrupt properties.
- Moved "required" behind "patternProperties". (by Krzysztof)
- Rewrote the examples of bindings. (by Krzysztof and Emil)
- Added Co-developed-by tag for Emil.
- Dropped unused "clocks" property in patch 3.
Patch 4 & 5:
- Renamed "pinctrl-starfive.*" to "pinctrl-starfive-jh7110.*" and replaced
all "starfive_" prefix with "jh7110_" in these files. (by Emil)
- Dropped macro GPIO_NUM_PER_WORD. (by Emil)
- Dropped unused flag member in starfive_pinctrl_soc_info structure. (by Emil)
- Renamed "pinctrl-jh7110-sys.c" to "pinctrl-starfive-jh7110-sys.c".
Renamed "pinctrl-jh7110-aon.c" to "pinctrl-starfive-jh7110-aon.c". (by Emil)
- Added individual Kconfig options for sys and aon pinctrl drivers. (by Emil)
- Made the sys and aon pinctrl drivers be modules. (by Emil)
- Added "JH7110_" prefix for macro SYS_GPO_PDA_0_74_CFG,
SYS_GPO_PDA_89_94_CFG and AON_GPO_PDA_0_5_CFG. (by Emil)
- Dropped jh7110_sys_pinctrl_probe() and jh7110_aon_pinctrl_probe().
Got the match data in the common jh7110_pinctrl_probe() and used it
to probe. (by Emil)
- Dropped the of_match_ptr macro(). (by Emil)
- Set the MODULE_LICENSE as "GPL" according to commit bf7fbeeae6db.
v2: https://lore.kernel.org/all/20221118011108.70715-1-hal.feng@starfivetech.com/
Changes since v1:
- Rebased on tag v6.1-rc5.
- Dropped patch 22 and 23 since they were merged in v6.1-rc1.
- Removed some unused macros and register values which do not belong to
bindings. Simplified pinctrl definitions in patch 24. (by Krzysztof)
- Split the bindings into sys pinctrl bindings and aon pinctrl bindings,
and split patch 25 into two patches.
- Made the bindings follow generic pinctrl bindings. (by Krzysztof)
- Fixed some wrong indentation in bindings, and checked it with
`make dt_binding_check`.
- Split the patch 26 into two patches which added sys and aon pinctrl
driver respectively.
- Restructured the pinctrl drivers so made them follow generic pinctrl
bindings. Rewrote `dt_node_to_map` and extracted the public code to make
it clearer.
v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/
Jianlong Huang (4):
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
pinctrl: starfive: Add StarFive JH7110 sys controller driver
pinctrl: starfive: Add StarFive JH7110 aon controller driver
.../pinctrl/starfive,jh7110-aon-pinctrl.yaml | 123 +++
.../pinctrl/starfive,jh7110-sys-pinctrl.yaml | 141 +++
MAINTAINERS | 8 +-
drivers/pinctrl/starfive/Kconfig | 33 +
drivers/pinctrl/starfive/Makefile | 4 +
.../starfive/pinctrl-starfive-jh7110-aon.c | 177 ++++
.../starfive/pinctrl-starfive-jh7110-sys.c | 449 ++++++++
.../starfive/pinctrl-starfive-jh7110.c | 982 ++++++++++++++++++
.../starfive/pinctrl-starfive-jh7110.h | 70 ++
.../pinctrl/starfive,jh7110-pinctrl.h | 137 +++
10 files changed, 2121 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110-aon.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110-sys.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110.h
create mode 100644 include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
--
2.38.1
WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-gpio@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Andreas Schwab <schwab@suse.de>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
Jianlong Huang <jianlong.huang@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 0/4] Basic pinctrl support for StarFive JH7110 RISC-V SoC
Date: Fri, 3 Feb 2023 22:17:57 +0800 [thread overview]
Message-ID: <20230203141801.59083-1-hal.feng@starfivetech.com> (raw)
This patch series adds basic pinctrl support for StarFive JH7110 SoC.
Changes since v3:
- Rebased on Linus's "devel" branch of linux-pinctrl repo, which was based on
on tag v6.2-rc1.
- Dropped patch 1.
Patch 2 & 3:
- Added a reference for '-pins$' patternProperties.
- Put "additionalProperties: false" before properties section. (by Rob)
- Improved the description.
- Changed the node name in examples from "gpio" to "pinctrl".
Patch 4:
- Added some missing headers. (by Andreas)
v3: https://lore.kernel.org/all/20221220005529.34744-1-hal.feng@starfivetech.com/
Changes since v2:
- Rebased on tag v6.1.
Patch 1:
- Renamed pinctrl-starfive-jh7110.h to
starfive,jh7110-pinctrl.h. (by Krzysztof)
- Separated the register values in the binding header and stored them in
a new file arch/riscv/boot/dts/starfive/jh7110-pinfunc.h. (by Krzysztof)
- Split patch 1 into sys part and aon part. Merged them into patch 2
and patch 3 respectively.
Patch 2 & 3:
- Dropped "reg-names" and the description of "interrupts". Dropped quotes
behind "$ref" and kept consisitent quotes. (by Krzysztof)
- Moved gpio properties behind interrupt properties.
- Moved "required" behind "patternProperties". (by Krzysztof)
- Rewrote the examples of bindings. (by Krzysztof and Emil)
- Added Co-developed-by tag for Emil.
- Dropped unused "clocks" property in patch 3.
Patch 4 & 5:
- Renamed "pinctrl-starfive.*" to "pinctrl-starfive-jh7110.*" and replaced
all "starfive_" prefix with "jh7110_" in these files. (by Emil)
- Dropped macro GPIO_NUM_PER_WORD. (by Emil)
- Dropped unused flag member in starfive_pinctrl_soc_info structure. (by Emil)
- Renamed "pinctrl-jh7110-sys.c" to "pinctrl-starfive-jh7110-sys.c".
Renamed "pinctrl-jh7110-aon.c" to "pinctrl-starfive-jh7110-aon.c". (by Emil)
- Added individual Kconfig options for sys and aon pinctrl drivers. (by Emil)
- Made the sys and aon pinctrl drivers be modules. (by Emil)
- Added "JH7110_" prefix for macro SYS_GPO_PDA_0_74_CFG,
SYS_GPO_PDA_89_94_CFG and AON_GPO_PDA_0_5_CFG. (by Emil)
- Dropped jh7110_sys_pinctrl_probe() and jh7110_aon_pinctrl_probe().
Got the match data in the common jh7110_pinctrl_probe() and used it
to probe. (by Emil)
- Dropped the of_match_ptr macro(). (by Emil)
- Set the MODULE_LICENSE as "GPL" according to commit bf7fbeeae6db.
v2: https://lore.kernel.org/all/20221118011108.70715-1-hal.feng@starfivetech.com/
Changes since v1:
- Rebased on tag v6.1-rc5.
- Dropped patch 22 and 23 since they were merged in v6.1-rc1.
- Removed some unused macros and register values which do not belong to
bindings. Simplified pinctrl definitions in patch 24. (by Krzysztof)
- Split the bindings into sys pinctrl bindings and aon pinctrl bindings,
and split patch 25 into two patches.
- Made the bindings follow generic pinctrl bindings. (by Krzysztof)
- Fixed some wrong indentation in bindings, and checked it with
`make dt_binding_check`.
- Split the patch 26 into two patches which added sys and aon pinctrl
driver respectively.
- Restructured the pinctrl drivers so made them follow generic pinctrl
bindings. Rewrote `dt_node_to_map` and extracted the public code to make
it clearer.
v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/
Jianlong Huang (4):
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
pinctrl: starfive: Add StarFive JH7110 sys controller driver
pinctrl: starfive: Add StarFive JH7110 aon controller driver
.../pinctrl/starfive,jh7110-aon-pinctrl.yaml | 123 +++
.../pinctrl/starfive,jh7110-sys-pinctrl.yaml | 141 +++
MAINTAINERS | 8 +-
drivers/pinctrl/starfive/Kconfig | 33 +
drivers/pinctrl/starfive/Makefile | 4 +
.../starfive/pinctrl-starfive-jh7110-aon.c | 177 ++++
.../starfive/pinctrl-starfive-jh7110-sys.c | 449 ++++++++
.../starfive/pinctrl-starfive-jh7110.c | 982 ++++++++++++++++++
.../starfive/pinctrl-starfive-jh7110.h | 70 ++
.../pinctrl/starfive,jh7110-pinctrl.h | 137 +++
10 files changed, 2121 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110-aon.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110-sys.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh7110.h
create mode 100644 include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2023-02-03 14:19 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-03 14:17 Hal Feng [this message]
2023-02-03 14:17 ` [PATCH v4 0/4] Basic pinctrl support for StarFive JH7110 RISC-V SoC Hal Feng
2023-02-03 14:17 ` [PATCH v4 1/4] dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl Hal Feng
2023-02-03 14:17 ` Hal Feng
2023-02-06 16:07 ` Rob Herring
2023-02-06 16:07 ` Rob Herring
2023-02-06 16:10 ` Rob Herring
2023-02-06 16:10 ` Rob Herring
2023-02-06 16:30 ` Hal Feng
2023-02-06 16:30 ` Hal Feng
2023-02-03 14:17 ` [PATCH v4 2/4] dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl Hal Feng
2023-02-03 14:17 ` Hal Feng
2023-02-06 16:11 ` Rob Herring
2023-02-06 16:11 ` Rob Herring
2023-02-06 16:35 ` Hal Feng
2023-02-06 16:35 ` Hal Feng
2023-02-03 14:18 ` [PATCH v4 3/4] pinctrl: starfive: Add StarFive JH7110 sys controller driver Hal Feng
2023-02-03 14:18 ` Hal Feng
2023-02-03 14:18 ` [PATCH v4 4/4] pinctrl: starfive: Add StarFive JH7110 aon " Hal Feng
2023-02-03 14:18 ` Hal Feng
2023-02-08 2:31 ` [PATCH v4 0/4] Basic pinctrl support for StarFive JH7110 RISC-V SoC Hal Feng
2023-02-08 2:31 ` Hal Feng
2023-02-09 10:34 ` Linus Walleij
2023-02-09 10:34 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203141801.59083-1-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=jianlong.huang@starfivetech.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=schwab@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.