All of lore.kernel.org
 help / color / mirror / Atom feed
From: Devarsh Thakkar <devarsht@ti.com>
To: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <robh+dt@kernel.org>,
	<kristo@kernel.org>, <nm@ti.com>, <vigneshr@ti.com>
Cc: <hnagalla@ti.com>, <praneeth@ti.com>, <a-bhatia1@ti.com>,
	<j-luthra@ti.com>, <devarsht@ti.com>
Subject: [PATCH] arm64: dts: ti: k3-am62a7-sk: Enable full 4GB DDR
Date: Mon, 6 Feb 2023 17:22:40 +0530	[thread overview]
Message-ID: <20230206115240.6026-1-devarsht@ti.com> (raw)

AM62A7-SK board has 4GB LPDDR4 Micron MT53E2G32D4DE-046 AUT:B memory but
only 2GB was enabled early.

Enable full 4GB memory by updating the latter 2GB memory region
which gets mapped to 0x0880000000 i.e. DDR16SS0_SDRAM as referred in
Table 2-1. AM62A Common SoC Memory of AM62Ax TRM.

TRM : https://www.ti.com/lit/zip/spruj16

Logs:
Link : https://gist.github.com/devarsht/e85b6af89c01ddadb3a62f3e5f196af8

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 5c9012141ee2..f6a67f072dca 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -27,8 +27,9 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
 	};
 
 	reserved-memory {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Devarsh Thakkar <devarsht@ti.com>
To: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <robh+dt@kernel.org>,
	<kristo@kernel.org>, <nm@ti.com>, <vigneshr@ti.com>
Cc: <hnagalla@ti.com>, <praneeth@ti.com>, <a-bhatia1@ti.com>,
	<j-luthra@ti.com>, <devarsht@ti.com>
Subject: [PATCH] arm64: dts: ti: k3-am62a7-sk: Enable full 4GB DDR
Date: Mon, 6 Feb 2023 17:22:40 +0530	[thread overview]
Message-ID: <20230206115240.6026-1-devarsht@ti.com> (raw)

AM62A7-SK board has 4GB LPDDR4 Micron MT53E2G32D4DE-046 AUT:B memory but
only 2GB was enabled early.

Enable full 4GB memory by updating the latter 2GB memory region
which gets mapped to 0x0880000000 i.e. DDR16SS0_SDRAM as referred in
Table 2-1. AM62A Common SoC Memory of AM62Ax TRM.

TRM : https://www.ti.com/lit/zip/spruj16

Logs:
Link : https://gist.github.com/devarsht/e85b6af89c01ddadb3a62f3e5f196af8

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 5c9012141ee2..f6a67f072dca 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -27,8 +27,9 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
 	};
 
 	reserved-memory {
-- 
2.17.1


             reply	other threads:[~2023-02-06 11:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-06 11:52 Devarsh Thakkar [this message]
2023-02-06 11:52 ` [PATCH] arm64: dts: ti: k3-am62a7-sk: Enable full 4GB DDR Devarsh Thakkar
2023-02-09 15:46 ` Nishanth Menon
2023-02-09 15:46   ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230206115240.6026-1-devarsht@ti.com \
    --to=devarsht@ti.com \
    --cc=a-bhatia1@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hnagalla@ti.com \
    --cc=j-luthra@ti.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=praneeth@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.