Re: [PATCH v1 1/3] dt-bindings: dma: snps,dw-axi-dmac: Update resets and add snps,num-hs-if

[Rob Herring <robh@kernel.org>]

On Mon, Feb 06, 2023 at 07:38:09PM +0800, Walker Chen wrote:
> Add two reset items and properties 'snps,num-hs-if'.
> The DMA controller needs to be reset before being used in JH7110 SoC.
> Another difference from the original version is that the hardware
> handshake number of DMA can be up to 56 while the number in original
> version is less than 16, and different registers are selected according
> to this.
> 
> Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
> ---
>  .../bindings/dma/snps,dw-axi-dmac.yaml          | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> index 67aa7bb6d36a..1a8d8c20e254 100644
> --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> @@ -9,6 +9,7 @@ title: Synopsys DesignWare AXI DMA Controller
>  maintainers:
>    - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
>    - Jee Heng Sia <jee.heng.sia@intel.com>
> +  - Walker Chen <walker.chen@starfivetech.com>
>  
>  description:
>    Synopsys DesignWare AXI DMA Controller DT Binding
> @@ -21,6 +22,7 @@ properties:
>      enum:
>        - snps,axi-dma-1.01a
>        - intel,kmb-axi-dma
> +      - starfive,axi-dma

This should be SoC specific.

>  
>    reg:
>      minItems: 1
> @@ -59,7 +61,12 @@ properties:
>      maximum: 8
>  
>    resets:
> -    maxItems: 1
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: axi-rst
> +      - const: ahb-rst

'-rst' is redundant.

>  
>    snps,dma-masters:
>      description: |
> @@ -74,6 +81,14 @@ properties:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1, 2, 3, 4, 5, 6]
>  
> +  snps,num-hs-if:
> +    description: |
> +      The number of hardware handshake. If it is more than 16,
> +      CHx_CFG2 is used to configure the DMA transfer instead of CHx_CFG.

Can't you infer this from the compatible string?

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 1
> +    maximum: 256
> +
>    snps,priority:
>      description: |
>        Channel priority specifier associated with the DMA channels.
> -- 
> 2.17.1
>