From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: <linux-cxl@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<linux-acpi@vger.kernel.org>, <dan.j.williams@intel.com>,
<ira.weiny@intel.com>, <vishal.l.verma@intel.com>,
<alison.schofield@intel.com>, <rafael@kernel.org>,
<bhelgaas@google.com>, <robert.moore@intel.com>
Subject: Re: [PATCH 14/18] cxl: Wait Memory_Info_Valid before access memory related info
Date: Thu, 9 Feb 2023 15:29:12 +0000 [thread overview]
Message-ID: <20230209152912.00001100@Huawei.com> (raw)
In-Reply-To: <167571668726.587790.16814881883553586342.stgit@djiang5-mobl3.local>
On Mon, 06 Feb 2023 13:51:28 -0700
Dave Jiang <dave.jiang@intel.com> wrote:
> CXL rev3.0 8.1.3.8.2 Memory_Info_valid field
>
> The Memory_Info_Valid bit indicates that the CXL Range Size High and Size
> Low registers are valid. The bit must be set within 1 second of reset
> deassertion to the device. Check valid bit before we check the
> Memory_Active bit when waiting for cxl_await_media_ready() to ensure that
> the memory info is valid for consumption.
>
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fix?
> ---
> drivers/cxl/core/pci.c | 25 +++++++++++++++++++++++--
> drivers/cxl/port.c | 20 ++++++++++----------
> 2 files changed, 33 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
> index 54ac6f8825ff..79a1348e7b98 100644
> --- a/drivers/cxl/core/pci.c
> +++ b/drivers/cxl/core/pci.c
> @@ -111,11 +111,32 @@ int cxl_await_media_ready(struct cxl_dev_state *cxlds)
> int d = cxlds->cxl_dvsec;
> bool active = false;
> u64 md_status;
> + u32 temp;
> int rc, i;
>
> - for (i = media_ready_timeout; i; i--) {
> - u32 temp;
> + /* Check MEM INFO VALID bit first, give up after 1s */
> + i = 1;
> + do {
> + rc = pci_read_config_dword(pdev,
> + d + CXL_DVSEC_RANGE_SIZE_LOW(0),
> + &temp);
> + if (rc)
> + return rc;
>
> + active = FIELD_GET(CXL_DVSEC_MEM_INFO_VALID, temp);
> + if (active)
> + break;
> + msleep(1000);
> + } while (i--);
If HDM_Count > 1, there is a second range to check and I think we
need both to be valid here.
> +
> + if (!active) {
> + dev_err(&pdev->dev,
> + "timeout awaiting memory valid after 1 second.\n");
> + return -ETIMEDOUT;
> + }
> +
> + /* Check MEM ACTIVE bit, up to 60s timeout by default */
> + for (i = media_ready_timeout; i; i--) {
> rc = pci_read_config_dword(
> pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &temp);
> if (rc)
> diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
> index d72e38f9ae44..03380c18fc52 100644
> --- a/drivers/cxl/port.c
> +++ b/drivers/cxl/port.c
> @@ -99,6 +99,16 @@ static int cxl_port_probe(struct device *dev)
> if (rc)
> return rc;
>
> + rc = cxl_hdm_decode_init(cxlds, cxlhdm);
> + if (rc)
> + return rc;
> +
> + rc = cxl_await_media_ready(cxlds);
> + if (rc) {
> + dev_err(dev, "Media not active (%d)\n", rc);
> + return rc;
> + }
> +
> if (port->cdat.table) {
> rc = cdat_table_parse_dsmas(port->cdat.table,
> cxl_dsmas_parse_entry,
> @@ -117,16 +127,6 @@ static int cxl_port_probe(struct device *dev)
> if (rc)
> dev_dbg(dev, "Failed to do QoS calculations\n");
> }
> -
> - rc = cxl_hdm_decode_init(cxlds, cxlhdm);
> - if (rc)
> - return rc;
> -
> - rc = cxl_await_media_ready(cxlds);
> - if (rc) {
> - dev_err(dev, "Media not active (%d)\n", rc);
> - return rc;
> - }
> }
>
> rc = devm_cxl_enumerate_decoders(cxlhdm);
>
>
next prev parent reply other threads:[~2023-02-09 15:29 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 20:49 [PATCH 00/18] cxl: Add support for QTG ID retrieval for CXL subsystem Dave Jiang
2023-02-06 20:49 ` [PATCH 01/18] cxl: Export QTG ids from CFMWS to sysfs Dave Jiang
2023-02-09 11:15 ` Jonathan Cameron
2023-02-09 17:28 ` Dave Jiang
2023-02-06 20:49 ` [PATCH 02/18] ACPICA: Export acpi_ut_verify_cdat_checksum() Dave Jiang
2023-02-07 14:19 ` Rafael J. Wysocki
2023-02-07 15:47 ` Dave Jiang
2023-02-09 11:30 ` Jonathan Cameron
2023-02-06 20:49 ` [PATCH 03/18] cxl: Add checksum verification to CDAT from CXL Dave Jiang
2023-02-09 11:34 ` Jonathan Cameron
2023-02-09 17:31 ` Dave Jiang
2023-02-06 20:49 ` [PATCH 04/18] cxl: Add common helpers for cdat parsing Dave Jiang
2023-02-09 11:58 ` Jonathan Cameron
2023-02-09 22:57 ` Dave Jiang
2023-02-11 10:18 ` Lukas Wunner
2023-02-14 13:17 ` Jonathan Cameron
2023-02-14 20:36 ` Dave Jiang
2023-02-06 20:50 ` [PATCH 05/18] ACPICA: Fix 'struct acpi_cdat_dsmas' spelling mistake Dave Jiang
2023-02-06 22:00 ` Lukas Wunner
2023-02-06 20:50 ` [PATCH 06/18] cxl: Add callback to parse the DSMAS subtables from CDAT Dave Jiang
2023-02-09 13:29 ` Jonathan Cameron
2023-02-13 22:55 ` Dave Jiang
2023-02-06 20:50 ` [PATCH 07/18] cxl: Add callback to parse the DSLBIS subtable " Dave Jiang
2023-02-09 13:50 ` Jonathan Cameron
2023-02-14 0:24 ` Dave Jiang
2023-02-06 20:50 ` [PATCH 08/18] cxl: Add support for _DSM Function for retrieving QTG ID Dave Jiang
2023-02-09 14:02 ` Jonathan Cameron
2023-02-14 21:07 ` Dave Jiang
2023-02-06 20:50 ` [PATCH 09/18] cxl: Add helper function to retrieve ACPI handle of CXL root device Dave Jiang
2023-02-09 14:10 ` Jonathan Cameron
2023-02-14 21:29 ` Dave Jiang
2023-02-06 20:50 ` [PATCH 10/18] PCI: Export pcie_get_speed() using the code from sysfs PCI link speed show function Dave Jiang
2023-02-06 22:27 ` Lukas Wunner
2023-02-07 20:29 ` Dave Jiang
2023-02-06 20:51 ` [PATCH 11/18] PCI: Export pcie_get_width() using the code from sysfs PCI link width " Dave Jiang
2023-02-06 22:43 ` Bjorn Helgaas
2023-02-07 20:35 ` Dave Jiang
2023-02-06 20:51 ` [PATCH 12/18] cxl: Add helpers to calculate pci latency for the CXL device Dave Jiang
2023-02-06 22:39 ` Bjorn Helgaas
2023-02-07 20:51 ` Dave Jiang
2023-02-08 22:15 ` Bjorn Helgaas
2023-02-08 23:56 ` Dave Jiang
2023-02-09 15:10 ` Jonathan Cameron
2023-02-14 22:22 ` Dave Jiang
2023-02-15 12:13 ` Jonathan Cameron
2023-02-22 17:54 ` Dave Jiang
2023-02-09 15:16 ` Jonathan Cameron
2023-02-06 20:51 ` [PATCH 13/18] cxl: Add latency and bandwidth calculations for the CXL path Dave Jiang
2023-02-09 15:24 ` Jonathan Cameron
2023-02-14 23:03 ` Dave Jiang
2023-02-15 13:17 ` Jonathan Cameron
2023-02-15 16:38 ` Dave Jiang
2023-02-06 20:51 ` [PATCH 14/18] cxl: Wait Memory_Info_Valid before access memory related info Dave Jiang
2023-02-09 15:29 ` Jonathan Cameron [this message]
2023-02-06 20:51 ` [PATCH 15/18] cxl: Move identify and partition query from pci probe to port probe Dave Jiang
2023-02-09 15:29 ` Jonathan Cameron
2023-02-06 20:51 ` [PATCH 16/18] cxl: Move reading of CDAT data from device to after media is ready Dave Jiang
2023-02-06 22:17 ` Lukas Wunner
2023-02-07 20:55 ` Dave Jiang
2023-02-09 15:31 ` Jonathan Cameron
2023-02-06 20:51 ` [PATCH 17/18] cxl: Attach QTG IDs to the DPA ranges for the device Dave Jiang
2023-02-09 15:34 ` Jonathan Cameron
2023-02-06 20:52 ` [PATCH 18/18] cxl: Export sysfs attributes for device QTG IDs Dave Jiang
2023-02-09 15:41 ` Jonathan Cameron
2023-03-23 23:20 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230209152912.00001100@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=robert.moore@intel.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.