Re: [PATCH v3 2/2] vdpasim: support doorbell mapping

["Michael S. Tsirkin" <mst@redhat.com>]

On Sun, Jan 29, 2023 at 02:19:51PM +0800, Jason Wang wrote:
> On Sun, Jan 29, 2023 at 10:51 AM Longpeng(Mike) <longpeng2@huawei.com> wrote:
> >
> > From: Longpeng <longpeng2@huawei.com>
> >
> > Support doorbell mapping for vdpasim devices, then we can test the notify
> > passthrough feature even if there's no real hardware on hand.
> >
> > Allocates a dummy page which is used to emulate the notify page of the device,
> > all VQs share the same notify register  that initiated to 0xffff. A  periodic
> > work will check whether there're requests need to process ( the value of the
> > notify register is 0xffff or not ).
> > ---
> >  drivers/vdpa/vdpa_sim/vdpa_sim.c | 65 ++++++++++++++++++++++++++++++++
> >  drivers/vdpa/vdpa_sim/vdpa_sim.h |  3 ++
> >  2 files changed, 68 insertions(+)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> > index b071f0d842fb..4fcfeb6e2fb8 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> > @@ -39,6 +39,8 @@ MODULE_PARM_DESC(max_iotlb_entries,
> >  #define VDPASIM_QUEUE_ALIGN PAGE_SIZE
> >  #define VDPASIM_QUEUE_MAX 256
> >  #define VDPASIM_VENDOR_ID 0
> > +#define VDPASIM_VRING_POLL_PERIOD 100 /* ms */
> > +#define VDPASIM_NOTIFY_DEFVAL 0xffff
> >
> >  static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa)
> >  {
> > @@ -246,6 +248,28 @@ static const struct dma_map_ops vdpasim_dma_ops = {
> >  static const struct vdpa_config_ops vdpasim_config_ops;
> >  static const struct vdpa_config_ops vdpasim_batch_config_ops;
> >
> > +static void vdpasim_notify_work(struct work_struct *work)
> > +{
> > +       struct vdpasim *vdpasim;
> > +       u16 *val;
> > +
> > +       vdpasim = container_of(work, struct vdpasim, notify_work.work);
> > +
> > +       if (!(vdpasim->status & VIRTIO_CONFIG_S_DRIVER_OK))
> > +               goto out;
> > +
> > +       if (!vdpasim->running)
> > +               goto out;
> > +
> > +       val = (u16 *)vdpasim->notify;
> > +       if (xchg(val, VDPASIM_NOTIFY_DEFVAL) != VDPASIM_NOTIFY_DEFVAL)
> > +               schedule_work(&vdpasim->work);
> > +
> > +out:
> > +       schedule_delayed_work(&vdpasim->notify_work,
> > +                             msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD));
> > +}
> > +
> >  struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr,
> >                                const struct vdpa_dev_set_config *config)
> >  {
> > @@ -287,6 +311,13 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr,
> >         set_dma_ops(dev, &vdpasim_dma_ops);
> >         vdpasim->vdpa.mdev = dev_attr->mgmt_dev;
> >
> > +       INIT_DELAYED_WORK(&vdpasim->notify_work, vdpasim_notify_work);
> > +
> > +       vdpasim->notify = __get_free_page(GFP_KERNEL | __GFP_ZERO);
> > +       if (!vdpasim->notify)
> > +               goto err_iommu;
> 
> We can simply avoid the advertising notification area in this case.
> 
> > +       *(u16 *)vdpasim->notify = VDPASIM_NOTIFY_DEFVAL;
> 
> WRITE_ONCE()?

it is just initialization so it should not matter.

> > +
> >         vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL);
> >         if (!vdpasim->config)
> >                 goto err_iommu;
> > @@ -498,16 +529,21 @@ static u8 vdpasim_get_status(struct vdpa_device *vdpa)
> >  static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status)
> >  {
> >         struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
> > +       bool started = vdpasim->status & VIRTIO_CONFIG_S_DRIVER_OK;
> 
> Do we need to do the check under the vdpasim->lock?
> 
> >
> >         spin_lock(&vdpasim->lock);
> >         vdpasim->status = status;
> >         spin_unlock(&vdpasim->lock);
> > +       if (!started && (status & VIRTIO_CONFIG_S_DRIVER_OK))
> > +               schedule_delayed_work(&vdpasim->notify_work,
> > +                                     msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD));
> >  }
> >
> >  static int vdpasim_reset(struct vdpa_device *vdpa)
> >  {
> >         struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
> >
> > +       cancel_delayed_work_sync(&vdpasim->notify_work);
> 
> Do we need to do this after setting running to zero? Otherwise it's racy.
> 
> Thanks
> 
> >         spin_lock(&vdpasim->lock);
> >         vdpasim->status = 0;
> >         vdpasim_do_reset(vdpasim);
> > @@ -672,11 +708,34 @@ static int vdpasim_dma_unmap(struct vdpa_device *vdpa, unsigned int asid,
> >         return 0;
> >  }
> >
> > +static pgprot_t vdpasim_get_vq_notification_pgprot(struct vdpa_device *vdpa,
> > +                                                  u16 qid, pgprot_t prot)
> > +{
> > +       /*
> > +        * We use normal RAM pages to emulate the vq notification area, so
> > +        * just keep the pgprot as it mmaped.
> > +        */
> > +       return prot;
> > +}
> > +
> > +static struct vdpa_notification_area
> > +vdpasim_get_vq_notification(struct vdpa_device *vdpa, u16 qid)
> > +{
> > +       struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
> > +       struct vdpa_notification_area notify;
> > +
> > +       notify.addr = virt_to_phys((void *)vdpasim->notify);
> > +       notify.size = PAGE_SIZE;
> > +
> > +       return notify;
> > +}
> > +
> >  static void vdpasim_free(struct vdpa_device *vdpa)
> >  {
> >         struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
> >         int i;
> >
> > +       cancel_delayed_work_sync(&vdpasim->notify_work);
> >         cancel_work_sync(&vdpasim->work);
> >
> >         for (i = 0; i < vdpasim->dev_attr.nvqs; i++) {
> > @@ -693,6 +752,8 @@ static void vdpasim_free(struct vdpa_device *vdpa)
> >         vhost_iotlb_free(vdpasim->iommu);
> >         kfree(vdpasim->vqs);
> >         kfree(vdpasim->config);
> > +       if (vdpasim->notify)
> > +               free_page(vdpasim->notify);
> >  }
> >
> >  static const struct vdpa_config_ops vdpasim_config_ops = {
> > @@ -704,6 +765,8 @@ static const struct vdpa_config_ops vdpasim_config_ops = {
> >         .get_vq_ready           = vdpasim_get_vq_ready,
> >         .set_vq_state           = vdpasim_set_vq_state,
> >         .get_vq_state           = vdpasim_get_vq_state,
> > +       .get_vq_notification    = vdpasim_get_vq_notification,
> > +       .get_vq_notification_pgprot = vdpasim_get_vq_notification_pgprot,
> >         .get_vq_align           = vdpasim_get_vq_align,
> >         .get_vq_group           = vdpasim_get_vq_group,
> >         .get_device_features    = vdpasim_get_device_features,
> > @@ -737,6 +800,8 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
> >         .get_vq_ready           = vdpasim_get_vq_ready,
> >         .set_vq_state           = vdpasim_set_vq_state,
> >         .get_vq_state           = vdpasim_get_vq_state,
> > +       .get_vq_notification    = vdpasim_get_vq_notification,
> > +       .get_vq_notification_pgprot = vdpasim_get_vq_notification_pgprot,
> >         .get_vq_align           = vdpasim_get_vq_align,
> >         .get_vq_group           = vdpasim_get_vq_group,
> >         .get_device_features    = vdpasim_get_device_features,
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h
> > index 0e78737dcc16..0769ccbd3911 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.h
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h
> > @@ -69,6 +69,9 @@ struct vdpasim {
> >         bool running;
> >         /* spinlock to synchronize iommu table */
> >         spinlock_t iommu_lock;
> > +       /* dummy notify page */
> > +       unsigned long notify;
> > +       struct delayed_work notify_work;
> >  };
> >
> >  struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr,
> > --
> > 2.23.0
> >

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization