Re: [RESEND PATCH v4] remoteproc: imx_dsp_rproc: add module parameter to ignore ready flag from remote processor

[Mathieu Poirier <mathieu.poirier@linaro.org>]

On Tue, Feb 14, 2023 at 06:37:44PM +0200, Iuliana Prodan (OSS) wrote:
> From: Iuliana Prodan <iuliana.prodan@nxp.com>
> 
> There are cases when we want to test a simple "hello world"
> application on the DSP and we don't have IPC between the cores.
> Therefore, do not wait for a confirmation from the remote processor
> at start.
> 
> Added "ignore_dsp_ready" flag while inserting the module to ignore
> remote processor reply after start.
> By default, this is off - do not ignore reply from rproc.
> 
> Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>

This patch is on my review list, as indicated in February 8th's patchset review
order email.  That said, I haven't seen Daniel's RB on the mailing list.

> ---
> Changes since v3
> - do not instantiate static var to 0, this is done by default
> - do not initialize mailbox if not IPC between the core
> 
> Changes since v2
> - s/ignoreready/ignore_dsp_ready
> 
> Changes since v1
> - change BIT(31) to BIT(1) for REMOTE_SKIP_WAIT
> 
> ---
>  drivers/remoteproc/imx_dsp_rproc.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
> index 95da1cbefacf..fb69f4e8ee96 100644
> --- a/drivers/remoteproc/imx_dsp_rproc.c
> +++ b/drivers/remoteproc/imx_dsp_rproc.c
> @@ -26,9 +26,18 @@
>  #include "remoteproc_elf_helpers.h"
>  #include "remoteproc_internal.h"
>  
> +/*
> + * Module parameters
> + */
> +static unsigned int imx_dsp_rproc_ignore_ready;
> +module_param_named(ignore_dsp_ready, imx_dsp_rproc_ignore_ready, int, 0644);
> +MODULE_PARM_DESC(ignore_dsp_ready,
> +		 "Ignore remote proc reply after start, default is 0 (off).");
> +
>  #define DSP_RPROC_CLK_MAX			5
>  
>  #define REMOTE_IS_READY				BIT(0)
> +#define REMOTE_SKIP_WAIT			BIT(1)
>  #define REMOTE_READY_WAIT_MAX_RETRIES		500
>  
>  /* att flags */
> @@ -282,6 +291,10 @@ static int imx_dsp_rproc_ready(struct rproc *rproc)
>  	struct imx_dsp_rproc *priv = rproc->priv;
>  	int i;
>  
> +	/* No IPC between the cores */
> +	if (priv->flags & REMOTE_SKIP_WAIT)
> +		return 0;
> +
>  	if (!priv->rxdb_ch)
>  		return 0;
>  
> @@ -503,6 +516,13 @@ static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
>  	struct mbox_client *cl;
>  	int ret;
>  
> +	/*
> +	 * If there is no IPC between the cores,
> +	 * then no need to initialize mailbox.
> +	 */
> +	if (priv->flags & REMOTE_SKIP_WAIT)
> +		return 0;
> +
>  	if (!of_get_property(dev->of_node, "mbox-names", NULL))
>  		return 0;
>  
> @@ -562,6 +582,10 @@ static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
>  
>  static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
>  {
> +	/* No IPC between the cores */
> +	if (priv->flags & REMOTE_SKIP_WAIT)
> +		return;
> +
>  	mbox_free_channel(priv->tx_ch);
>  	mbox_free_channel(priv->rx_ch);
>  	mbox_free_channel(priv->rxdb_ch);
> @@ -903,6 +927,9 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
>  	priv->rproc = rproc;
>  	priv->dsp_dcfg = dsp_dcfg;
>  
> +	if (imx_dsp_rproc_ignore_ready)
> +		priv->flags |= REMOTE_SKIP_WAIT;
> +
>  	dev_set_drvdata(dev, rproc);
>  
>  	INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
> -- 
> 2.17.1
>