All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>, Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	devicetree@vger.kernel.org, kernel@dh-electronics.com
Subject: [PATCH] arm64: dts: imx8mp: Update GPIO M to CLKOUT1 on DH electronics i.MX8M Plus DHCOM and PDK2
Date: Fri, 17 Feb 2023 20:25:45 +0100	[thread overview]
Message-ID: <20230217192545.61714-1-marex@denx.de> (raw)

The GPIO M SoM pin is connected to CLKOUT1, while CLKOUT2 is used as a supply
for TC9595 bridge chip clock. Update the comment. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 2 +-
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index fdf18b7f208d5..b657ac6adddbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -173,7 +173,7 @@ &iomuxc {
 	/*
 	 * GPIO_A,B,C,D are connected to buttons.
 	 * GPIO_E,F,H,I are connected to LEDs.
-	 * GPIO_M is connected to CLKOUT2.
+	 * GPIO_M is connected to CLKOUT1.
 	 */
 	pinctrl-0 = <&pinctrl_hog_base
 		     &pinctrl_dhcom_g &pinctrl_dhcom_j
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 9cdd4234c4cae..cc8e086ff7b63 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -547,7 +547,7 @@ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
 		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
 		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
 		     &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-		     /* GPIO_M is connected to CLKOUT2 */
+		     /* GPIO_M is connected to CLKOUT1 */
 		     &pinctrl_dhcom_int>;
 	pinctrl-names = "default";
 
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>, Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	devicetree@vger.kernel.org, kernel@dh-electronics.com
Subject: [PATCH] arm64: dts: imx8mp: Update GPIO M to CLKOUT1 on DH electronics i.MX8M Plus DHCOM and PDK2
Date: Fri, 17 Feb 2023 20:25:45 +0100	[thread overview]
Message-ID: <20230217192545.61714-1-marex@denx.de> (raw)

The GPIO M SoM pin is connected to CLKOUT1, while CLKOUT2 is used as a supply
for TC9595 bridge chip clock. Update the comment. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 2 +-
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index fdf18b7f208d5..b657ac6adddbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -173,7 +173,7 @@ &iomuxc {
 	/*
 	 * GPIO_A,B,C,D are connected to buttons.
 	 * GPIO_E,F,H,I are connected to LEDs.
-	 * GPIO_M is connected to CLKOUT2.
+	 * GPIO_M is connected to CLKOUT1.
 	 */
 	pinctrl-0 = <&pinctrl_hog_base
 		     &pinctrl_dhcom_g &pinctrl_dhcom_j
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 9cdd4234c4cae..cc8e086ff7b63 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -547,7 +547,7 @@ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
 		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
 		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
 		     &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-		     /* GPIO_M is connected to CLKOUT2 */
+		     /* GPIO_M is connected to CLKOUT1 */
 		     &pinctrl_dhcom_int>;
 	pinctrl-names = "default";
 
-- 
2.39.1


             reply	other threads:[~2023-02-17 19:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-17 19:25 Marek Vasut [this message]
2023-02-17 19:25 ` [PATCH] arm64: dts: imx8mp: Update GPIO M to CLKOUT1 on DH electronics i.MX8M Plus DHCOM and PDK2 Marek Vasut
2023-03-14  1:43 ` Shawn Guo
2023-03-14  1:43   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230217192545.61714-1-marex@denx.de \
    --to=marex@denx.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@dh-electronics.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.