From: Walker Chen <walker.chen@starfivetech.com>
To: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor.dooley@microchip.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
Walker Chen <walker.chen@starfivetech.com>
Cc: <dmaengine@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
Subject: [PATCH v4 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA
Date: Mon, 6 Mar 2023 22:04:29 +0800 [thread overview]
Message-ID: <20230306140430.28951-3-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230306140430.28951-1-walker.chen@starfivetech.com>
Add dma reset operation in device probe and use different configuration
on CH_CFG registers according to match data. Update all uses of
of_device_is_compatible with of_device_get_match_data.
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
.../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 67 ++++++++++++++++---
drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 2 +
2 files changed, 61 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index bf85aa0979ec..d1148f6fbcf9 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -21,10 +21,12 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
+#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -46,6 +48,12 @@
DMA_SLAVE_BUSWIDTH_32_BYTES | \
DMA_SLAVE_BUSWIDTH_64_BYTES)
+struct axi_dma_chip_config {
+ int (*apb_setup)(struct platform_device *pdev, struct axi_dma_chip *chip);
+ int (*reset_init)(struct platform_device *pdev);
+ bool use_cfg2;
+};
+
static inline void
axi_dma_iowrite32(struct axi_dma_chip *chip, u32 reg, u32 val)
{
@@ -86,7 +94,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan,
cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS |
config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS);
- if (chan->chip->dw->hdata->reg_map_8_channels) {
+ if (chan->chip->dw->hdata->reg_map_8_channels &&
+ !chan->chip->dw->hdata->use_cfg2) {
cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS |
config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS |
config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS |
@@ -1142,7 +1151,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
axi_chan_disable(chan);
ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
- !(val & chan_active), 1000, 10000);
+ !(val & chan_active), 1000, DMAC_TIMEOUT_US);
if (ret == -ETIMEDOUT)
dev_warn(dchan2dev(dchan),
"%s failed to stop\n", axi_chan_name(chan));
@@ -1367,13 +1376,33 @@ static int parse_device_properties(struct axi_dma_chip *chip)
return 0;
}
+static int intel_apb_setup(struct platform_device *pdev, struct axi_dma_chip *chip)
+{
+ chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(chip->apb_regs))
+ return PTR_ERR(chip->apb_regs);
+ else
+ return 0;
+}
+
+static int jh7110_reset_init(struct platform_device *pdev)
+{
+ struct reset_control *resets;
+
+ resets = devm_reset_control_array_get_exclusive(&pdev->dev);
+ if (IS_ERR(resets))
+ return PTR_ERR(resets);
+
+ return reset_control_deassert(resets);
+}
+
static int dw_probe(struct platform_device *pdev)
{
- struct device_node *node = pdev->dev.of_node;
struct axi_dma_chip *chip;
struct resource *mem;
struct dw_axi_dma *dw;
struct dw_axi_dma_hcfg *hdata;
+ const struct axi_dma_chip_config *ccfg;
u32 i;
int ret;
@@ -1402,10 +1431,21 @@ static int dw_probe(struct platform_device *pdev)
if (IS_ERR(chip->regs))
return PTR_ERR(chip->regs);
- if (of_device_is_compatible(node, "intel,kmb-axi-dma")) {
- chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
- if (IS_ERR(chip->apb_regs))
- return PTR_ERR(chip->apb_regs);
+ ccfg = of_device_get_match_data(&pdev->dev);
+ if (ccfg) {
+ if (ccfg->apb_setup) {
+ ret = ccfg->apb_setup(pdev, chip);
+ if (ret)
+ return ret;
+ }
+
+ if (ccfg->reset_init) {
+ ret = ccfg->reset_init(pdev);
+ if (ret)
+ return ret;
+ }
+
+ chip->dw->hdata->use_cfg2 = ccfg->use_cfg2;
}
chip->core_clk = devm_clk_get(chip->dev, "core-clk");
@@ -1557,9 +1597,20 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend, axi_dma_runtime_resume, NULL)
};
+static const struct axi_dma_chip_config intel_chip_config = {
+ .apb_setup = intel_apb_setup,
+ .use_cfg2 = false,
+};
+
+static const struct axi_dma_chip_config jh7110_chip_config = {
+ .reset_init = jh7110_reset_init,
+ .use_cfg2 = true,
+};
+
static const struct of_device_id dw_dma_of_id_table[] = {
{ .compatible = "snps,axi-dma-1.01a" },
- { .compatible = "intel,kmb-axi-dma" },
+ { .compatible = "intel,kmb-axi-dma", .data = &intel_chip_config },
+ { .compatible = "starfive,jh7110-axi-dma", .data = &jh7110_chip_config },
{}
};
MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index e9d5eb0fd594..b906d5884efe 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -21,6 +21,7 @@
#define DMAC_MAX_CHANNELS 16
#define DMAC_MAX_MASTERS 2
#define DMAC_MAX_BLK_SIZE 0x200000
+#define DMAC_TIMEOUT_US 200000
struct dw_axi_dma_hcfg {
u32 nr_channels;
@@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg {
/* Register map for DMAX_NUM_CHANNELS <= 8 */
bool reg_map_8_channels;
bool restrict_axi_burst_len;
+ bool use_cfg2;
};
struct axi_dma_chan {
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Walker Chen <walker.chen@starfivetech.com>
To: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor.dooley@microchip.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
Walker Chen <walker.chen@starfivetech.com>
Cc: <dmaengine@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
Subject: [PATCH v4 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA
Date: Mon, 6 Mar 2023 22:04:29 +0800 [thread overview]
Message-ID: <20230306140430.28951-3-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230306140430.28951-1-walker.chen@starfivetech.com>
Add dma reset operation in device probe and use different configuration
on CH_CFG registers according to match data. Update all uses of
of_device_is_compatible with of_device_get_match_data.
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
.../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 67 ++++++++++++++++---
drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 2 +
2 files changed, 61 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index bf85aa0979ec..d1148f6fbcf9 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -21,10 +21,12 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
+#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -46,6 +48,12 @@
DMA_SLAVE_BUSWIDTH_32_BYTES | \
DMA_SLAVE_BUSWIDTH_64_BYTES)
+struct axi_dma_chip_config {
+ int (*apb_setup)(struct platform_device *pdev, struct axi_dma_chip *chip);
+ int (*reset_init)(struct platform_device *pdev);
+ bool use_cfg2;
+};
+
static inline void
axi_dma_iowrite32(struct axi_dma_chip *chip, u32 reg, u32 val)
{
@@ -86,7 +94,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan,
cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS |
config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS);
- if (chan->chip->dw->hdata->reg_map_8_channels) {
+ if (chan->chip->dw->hdata->reg_map_8_channels &&
+ !chan->chip->dw->hdata->use_cfg2) {
cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS |
config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS |
config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS |
@@ -1142,7 +1151,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
axi_chan_disable(chan);
ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
- !(val & chan_active), 1000, 10000);
+ !(val & chan_active), 1000, DMAC_TIMEOUT_US);
if (ret == -ETIMEDOUT)
dev_warn(dchan2dev(dchan),
"%s failed to stop\n", axi_chan_name(chan));
@@ -1367,13 +1376,33 @@ static int parse_device_properties(struct axi_dma_chip *chip)
return 0;
}
+static int intel_apb_setup(struct platform_device *pdev, struct axi_dma_chip *chip)
+{
+ chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(chip->apb_regs))
+ return PTR_ERR(chip->apb_regs);
+ else
+ return 0;
+}
+
+static int jh7110_reset_init(struct platform_device *pdev)
+{
+ struct reset_control *resets;
+
+ resets = devm_reset_control_array_get_exclusive(&pdev->dev);
+ if (IS_ERR(resets))
+ return PTR_ERR(resets);
+
+ return reset_control_deassert(resets);
+}
+
static int dw_probe(struct platform_device *pdev)
{
- struct device_node *node = pdev->dev.of_node;
struct axi_dma_chip *chip;
struct resource *mem;
struct dw_axi_dma *dw;
struct dw_axi_dma_hcfg *hdata;
+ const struct axi_dma_chip_config *ccfg;
u32 i;
int ret;
@@ -1402,10 +1431,21 @@ static int dw_probe(struct platform_device *pdev)
if (IS_ERR(chip->regs))
return PTR_ERR(chip->regs);
- if (of_device_is_compatible(node, "intel,kmb-axi-dma")) {
- chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
- if (IS_ERR(chip->apb_regs))
- return PTR_ERR(chip->apb_regs);
+ ccfg = of_device_get_match_data(&pdev->dev);
+ if (ccfg) {
+ if (ccfg->apb_setup) {
+ ret = ccfg->apb_setup(pdev, chip);
+ if (ret)
+ return ret;
+ }
+
+ if (ccfg->reset_init) {
+ ret = ccfg->reset_init(pdev);
+ if (ret)
+ return ret;
+ }
+
+ chip->dw->hdata->use_cfg2 = ccfg->use_cfg2;
}
chip->core_clk = devm_clk_get(chip->dev, "core-clk");
@@ -1557,9 +1597,20 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend, axi_dma_runtime_resume, NULL)
};
+static const struct axi_dma_chip_config intel_chip_config = {
+ .apb_setup = intel_apb_setup,
+ .use_cfg2 = false,
+};
+
+static const struct axi_dma_chip_config jh7110_chip_config = {
+ .reset_init = jh7110_reset_init,
+ .use_cfg2 = true,
+};
+
static const struct of_device_id dw_dma_of_id_table[] = {
{ .compatible = "snps,axi-dma-1.01a" },
- { .compatible = "intel,kmb-axi-dma" },
+ { .compatible = "intel,kmb-axi-dma", .data = &intel_chip_config },
+ { .compatible = "starfive,jh7110-axi-dma", .data = &jh7110_chip_config },
{}
};
MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index e9d5eb0fd594..b906d5884efe 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -21,6 +21,7 @@
#define DMAC_MAX_CHANNELS 16
#define DMAC_MAX_MASTERS 2
#define DMAC_MAX_BLK_SIZE 0x200000
+#define DMAC_TIMEOUT_US 200000
struct dw_axi_dma_hcfg {
u32 nr_channels;
@@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg {
/* Register map for DMAX_NUM_CHANNELS <= 8 */
bool reg_map_8_channels;
bool restrict_axi_burst_len;
+ bool use_cfg2;
};
struct axi_dma_chan {
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2023-03-06 14:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-06 14:04 [PATCH v4 0/3] Add DMA driver for StarFive JH7110 SoC Walker Chen
2023-03-06 14:04 ` Walker Chen
2023-03-06 14:04 ` [PATCH v4 1/3] dt-bindings: dma: snps,dw-axi-dmac: constrain resets items for JH7110 dma Walker Chen
2023-03-06 14:04 ` Walker Chen
2023-03-07 9:03 ` Krzysztof Kozlowski
2023-03-07 9:03 ` Krzysztof Kozlowski
2023-03-07 10:30 ` Walker Chen
2023-03-07 10:30 ` Walker Chen
2023-03-07 15:51 ` Krzysztof Kozlowski
2023-03-07 15:51 ` Krzysztof Kozlowski
2023-03-08 1:08 ` Walker Chen
2023-03-08 1:08 ` Walker Chen
2023-03-06 14:04 ` Walker Chen [this message]
2023-03-06 14:04 ` [PATCH v4 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA Walker Chen
2023-03-06 14:39 ` Emil Renner Berthing
2023-03-06 14:39 ` Emil Renner Berthing
2023-03-07 1:38 ` Walker Chen
2023-03-07 1:38 ` Walker Chen
2023-03-06 14:04 ` [PATCH v4 3/3] riscv: dts: starfive: add dma controller node Walker Chen
2023-03-06 14:04 ` Walker Chen
2023-03-06 14:51 ` Emil Renner Berthing
2023-03-06 14:51 ` Emil Renner Berthing
2023-03-07 1:40 ` Walker Chen
2023-03-07 1:40 ` Walker Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230306140430.28951-3-walker.chen@starfivetech.com \
--to=walker.chen@starfivetech.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.