From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Kurt Kanzenbach <kurt@linutronix.de>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH net-next v5 1/1] net: dsa: hellcreek: Get rid of custom led_init_default_state_get()
Date: Fri, 10 Mar 2023 18:38:55 +0200 [thread overview]
Message-ID: <20230310163855.21757-1-andriy.shevchenko@linux.intel.com> (raw)
LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
---
v5: resent after v6.3-rc1 with proper net-next prefix
drivers/net/dsa/hirschmann/hellcreek_ptp.c | 45 ++++++++++++----------
1 file changed, 24 insertions(+), 21 deletions(-)
diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
index b28baab6d56a..793b2c296314 100644
--- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c
+++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
@@ -297,7 +297,8 @@ static enum led_brightness hellcreek_led_is_gm_get(struct led_classdev *ldev)
static int hellcreek_led_setup(struct hellcreek *hellcreek)
{
struct device_node *leds, *led = NULL;
- const char *label, *state;
+ enum led_default_state state;
+ const char *label;
int ret = -EINVAL;
of_node_get(hellcreek->dev->of_node);
@@ -318,16 +319,17 @@ static int hellcreek_led_setup(struct hellcreek *hellcreek)
ret = of_property_read_string(led, "label", &label);
hellcreek->led_sync_good.name = ret ? "sync_good" : label;
- ret = of_property_read_string(led, "default-state", &state);
- if (!ret) {
- if (!strcmp(state, "on"))
- hellcreek->led_sync_good.brightness = 1;
- else if (!strcmp(state, "off"))
- hellcreek->led_sync_good.brightness = 0;
- else if (!strcmp(state, "keep"))
- hellcreek->led_sync_good.brightness =
- hellcreek_get_brightness(hellcreek,
- STATUS_OUT_SYNC_GOOD);
+ state = led_init_default_state_get(of_fwnode_handle(led));
+ switch (state) {
+ case LEDS_DEFSTATE_ON:
+ hellcreek->led_sync_good.brightness = 1;
+ break;
+ case LEDS_DEFSTATE_KEEP:
+ hellcreek->led_sync_good.brightness =
+ hellcreek_get_brightness(hellcreek, STATUS_OUT_SYNC_GOOD);
+ break;
+ default:
+ hellcreek->led_sync_good.brightness = 0;
}
hellcreek->led_sync_good.max_brightness = 1;
@@ -344,16 +346,17 @@ static int hellcreek_led_setup(struct hellcreek *hellcreek)
ret = of_property_read_string(led, "label", &label);
hellcreek->led_is_gm.name = ret ? "is_gm" : label;
- ret = of_property_read_string(led, "default-state", &state);
- if (!ret) {
- if (!strcmp(state, "on"))
- hellcreek->led_is_gm.brightness = 1;
- else if (!strcmp(state, "off"))
- hellcreek->led_is_gm.brightness = 0;
- else if (!strcmp(state, "keep"))
- hellcreek->led_is_gm.brightness =
- hellcreek_get_brightness(hellcreek,
- STATUS_OUT_IS_GM);
+ state = led_init_default_state_get(of_fwnode_handle(led));
+ switch (state) {
+ case LEDS_DEFSTATE_ON:
+ hellcreek->led_is_gm.brightness = 1;
+ break;
+ case LEDS_DEFSTATE_KEEP:
+ hellcreek->led_is_gm.brightness =
+ hellcreek_get_brightness(hellcreek, STATUS_OUT_IS_GM);
+ break;
+ default:
+ hellcreek->led_is_gm.brightness = 0;
}
hellcreek->led_is_gm.max_brightness = 1;
--
2.39.1
next reply other threads:[~2023-03-10 16:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-10 16:38 Andy Shevchenko [this message]
2023-03-10 18:18 ` [PATCH net-next v5 1/1] net: dsa: hellcreek: Get rid of custom led_init_default_state_get() Simon Horman
2023-03-10 18:44 ` Andy Shevchenko
2023-03-10 20:06 ` Andy Shevchenko
2023-03-10 20:16 ` Simon Horman
2023-03-10 20:23 ` Andy Shevchenko
2023-03-10 20:17 ` Simon Horman
2023-03-11 2:41 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230310163855.21757-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=kurt@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.