All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>,
	open list <linux-kernel@vger.kernel.org>,
	imx@lists.linux.dev
Subject: Re: [PATCH 2/2] arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
Date: Tue, 14 Mar 2023 08:53:45 +0800	[thread overview]
Message-ID: <20230314005345.GU143566@dragon> (raw)
In-Reply-To: <20230213222229.686072-2-Frank.Li@nxp.com>

On Mon, Feb 13, 2023 at 05:22:28PM -0500, Frank Li wrote:
> Enable USB3 controller, phy and typec related nodes.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 87 +++++++++++++++++++
>  1 file changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index afa883389456..64f20ff44ba7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  
>  #include "imx8qxp.dtsi"
> +#include <dt-bindings/usb/pd.h>
>  
>  / {
>  	model = "Freescale i.MX8QXP MEK";
> @@ -28,6 +29,21 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
>  		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  	};
> +
> +	gpio-sbu-mux {
> +		compatible = "gpio-sbu-mux";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec_mux>;
> +		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_LOW>;
> +		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
> +		orientation-switch;
> +
> +		port {
> +			usb3_data_ss: endpoint {
> +				remote-endpoint = <&typec_con_ss>;
> +			};
> +		};
> +	};
>  };
>  
>  &dsp {
> @@ -127,6 +143,44 @@ light-sensor@44 {
>  			};
>  		};
>  	};
> +
> +	ptn5110: tcpc@50 {
> +		compatible = "nxp,ptn5110";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec>;
> +		reg = <0x50>;
> +

Unneeded newline.

> +		interrupt-parent = <&lsio_gpio1>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +		status = "okay";

Unneeded "okay" status.

> +
> +		port {
> +			typec_dr_sw: endpoint {
> +				remote-endpoint = <&usb3_drd_sw>;
> +			};
> +		};
> +
> +		usb_con1: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			power-role = "source";
> +			data-role = "dual";
> +			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@1 {
> +					reg = <1>;
> +						typec_con_ss: endpoint {

Broken indent alignment.

Shawn

> +							remote-endpoint = <&usb3_data_ss>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +
>  };
>  
>  &lpuart0 {
> @@ -204,6 +258,27 @@ &usdhc2 {
>  	status = "okay";
>  };
>  
> +&usb3_phy {
> +	status = "okay";
> +};
> +
> +&usbotg3 {
> +	status = "okay";
> +};
> +
> +&usbotg3_cdns3 {
> +	dr_mode = "otg";
> +	usb-role-switch;
> +	status = "okay";
> +
> +	port {
> +		usb3_drd_sw: endpoint {
> +			remote-endpoint = <&typec_dr_sw>;
> +		};
> +	};
> +};
> +
> +
>  &vpu {
>  	compatible = "nxp,imx8qxp-vpu";
>  	status = "okay";
> @@ -267,6 +342,18 @@ IMX8QXP_UART0_TX_ADMA_UART0_TX				0x06000020
>  		>;
>  	};
>  
> +	pinctrl_typec: typecgrp {
> +		fsl,pins = <
> +			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
> +		>;
> +	};
> +
> +	pinctrl_typec_mux: typecmuxgrp {
> +		fsl,pins = <
> +			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
> +		>;
> +	};
> +
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
>  			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
> -- 
> 2.34.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>,
	open list <linux-kernel@vger.kernel.org>,
	imx@lists.linux.dev
Subject: Re: [PATCH 2/2] arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
Date: Tue, 14 Mar 2023 08:53:45 +0800	[thread overview]
Message-ID: <20230314005345.GU143566@dragon> (raw)
In-Reply-To: <20230213222229.686072-2-Frank.Li@nxp.com>

On Mon, Feb 13, 2023 at 05:22:28PM -0500, Frank Li wrote:
> Enable USB3 controller, phy and typec related nodes.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 87 +++++++++++++++++++
>  1 file changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index afa883389456..64f20ff44ba7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  
>  #include "imx8qxp.dtsi"
> +#include <dt-bindings/usb/pd.h>
>  
>  / {
>  	model = "Freescale i.MX8QXP MEK";
> @@ -28,6 +29,21 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
>  		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  	};
> +
> +	gpio-sbu-mux {
> +		compatible = "gpio-sbu-mux";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec_mux>;
> +		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_LOW>;
> +		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
> +		orientation-switch;
> +
> +		port {
> +			usb3_data_ss: endpoint {
> +				remote-endpoint = <&typec_con_ss>;
> +			};
> +		};
> +	};
>  };
>  
>  &dsp {
> @@ -127,6 +143,44 @@ light-sensor@44 {
>  			};
>  		};
>  	};
> +
> +	ptn5110: tcpc@50 {
> +		compatible = "nxp,ptn5110";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec>;
> +		reg = <0x50>;
> +

Unneeded newline.

> +		interrupt-parent = <&lsio_gpio1>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +		status = "okay";

Unneeded "okay" status.

> +
> +		port {
> +			typec_dr_sw: endpoint {
> +				remote-endpoint = <&usb3_drd_sw>;
> +			};
> +		};
> +
> +		usb_con1: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			power-role = "source";
> +			data-role = "dual";
> +			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@1 {
> +					reg = <1>;
> +						typec_con_ss: endpoint {

Broken indent alignment.

Shawn

> +							remote-endpoint = <&usb3_data_ss>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +
>  };
>  
>  &lpuart0 {
> @@ -204,6 +258,27 @@ &usdhc2 {
>  	status = "okay";
>  };
>  
> +&usb3_phy {
> +	status = "okay";
> +};
> +
> +&usbotg3 {
> +	status = "okay";
> +};
> +
> +&usbotg3_cdns3 {
> +	dr_mode = "otg";
> +	usb-role-switch;
> +	status = "okay";
> +
> +	port {
> +		usb3_drd_sw: endpoint {
> +			remote-endpoint = <&typec_dr_sw>;
> +		};
> +	};
> +};
> +
> +
>  &vpu {
>  	compatible = "nxp,imx8qxp-vpu";
>  	status = "okay";
> @@ -267,6 +342,18 @@ IMX8QXP_UART0_TX_ADMA_UART0_TX				0x06000020
>  		>;
>  	};
>  
> +	pinctrl_typec: typecgrp {
> +		fsl,pins = <
> +			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
> +		>;
> +	};
> +
> +	pinctrl_typec_mux: typecmuxgrp {
> +		fsl,pins = <
> +			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
> +		>;
> +	};
> +
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
>  			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
> -- 
> 2.34.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-03-14  0:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-13 22:22 [PATCH 1/2] arm64: dts: imx8qxp: add cadence usb3 support Frank Li
2023-02-13 22:22 ` Frank Li
2023-02-13 22:22 ` [PATCH 2/2] arm64: dts: freescale: imx8qxp-mek: enable cadence usb3 Frank Li
2023-02-13 22:22   ` Frank Li
2023-03-14  0:53   ` Shawn Guo [this message]
2023-03-14  0:53     ` Shawn Guo
2023-03-14  0:50 ` [PATCH 1/2] arm64: dts: imx8qxp: add cadence usb3 support Shawn Guo
2023-03-14  0:50   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230314005345.GU143566@dragon \
    --to=shawnguo@kernel.org \
    --cc=Frank.Li@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.