From: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Michal Simek <michal.simek@xilinx.com>,
Peter Rosin <peda@axentia.se>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
asahi@lists.linux.dev, linux-arm-msm@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH] dt-bindings: i2c: Drop unneeded quotes
Date: Wed, 22 Mar 2023 12:35:29 -0500 [thread overview]
Message-ID: <20230322173530.3971676-1-robh@kernel.org> (raw)
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/apple,i2c.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml | 2 +-
Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 2 +-
.../devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 4 ++--
8 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 199a354ccb97..26bed558c6b8 100644
--- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson I2C Controller
diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
index 4ac61fec90e2..243da7003cec 100644
--- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/apple,i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Apple/PASemi I2C controller
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index ea2303c0e143..6adedd3ec399 100644
--- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -75,7 +75,7 @@ required:
- clocks
allOf:
- - $ref: "i2c-controller.yaml"
+ - $ref: i2c-controller.yaml
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index 2e95cda7262a..7a675aa08c44 100644
--- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence I2C controller
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
index 6e0a5686af04..f34cc7ad5a00 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
@@ -45,7 +45,7 @@ properties:
i2c-parent:
description: phandle of the I2C bus that this multiplexer's master-side port is connected to
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
mux-gpios:
description: list of GPIOs used to control the muxer
@@ -55,7 +55,7 @@ properties:
idle-state:
description: Value to set the muxer to when idle. When no value is given, it defaults to the
last value used.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
allOf:
- $ref: i2c-mux.yaml
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 0e88c85985b5..9f66a3bb1f80 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Geni based QUP I2C Controller
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index bf396e9466aa..94b75d9f66cd 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -90,7 +90,7 @@ properties:
st,syscfg-fmp:
description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
Plus speed is selected by slave.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to syscfg
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 1b598638d457..658ae92fa86d 100644
--- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx IIC controller
--
2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Michal Simek <michal.simek@xilinx.com>,
Peter Rosin <peda@axentia.se>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
asahi@lists.linux.dev, linux-arm-msm@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH] dt-bindings: i2c: Drop unneeded quotes
Date: Wed, 22 Mar 2023 12:35:29 -0500 [thread overview]
Message-ID: <20230322173530.3971676-1-robh@kernel.org> (raw)
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/apple,i2c.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml | 2 +-
Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 2 +-
.../devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 4 ++--
8 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 199a354ccb97..26bed558c6b8 100644
--- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson I2C Controller
diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
index 4ac61fec90e2..243da7003cec 100644
--- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/apple,i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Apple/PASemi I2C controller
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index ea2303c0e143..6adedd3ec399 100644
--- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -75,7 +75,7 @@ required:
- clocks
allOf:
- - $ref: "i2c-controller.yaml"
+ - $ref: i2c-controller.yaml
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index 2e95cda7262a..7a675aa08c44 100644
--- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence I2C controller
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
index 6e0a5686af04..f34cc7ad5a00 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
@@ -45,7 +45,7 @@ properties:
i2c-parent:
description: phandle of the I2C bus that this multiplexer's master-side port is connected to
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
mux-gpios:
description: list of GPIOs used to control the muxer
@@ -55,7 +55,7 @@ properties:
idle-state:
description: Value to set the muxer to when idle. When no value is given, it defaults to the
last value used.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
allOf:
- $ref: i2c-mux.yaml
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 0e88c85985b5..9f66a3bb1f80 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Geni based QUP I2C Controller
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index bf396e9466aa..94b75d9f66cd 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -90,7 +90,7 @@ properties:
st,syscfg-fmp:
description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
Plus speed is selected by slave.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to syscfg
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 1b598638d457..658ae92fa86d 100644
--- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx IIC controller
--
2.39.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Michal Simek <michal.simek@xilinx.com>,
Peter Rosin <peda@axentia.se>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
asahi@lists.linux.dev, linux-arm-msm@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH] dt-bindings: i2c: Drop unneeded quotes
Date: Wed, 22 Mar 2023 12:35:29 -0500 [thread overview]
Message-ID: <20230322173530.3971676-1-robh@kernel.org> (raw)
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/apple,i2c.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml | 2 +-
Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 4 ++--
Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 2 +-
.../devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 4 ++--
8 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 199a354ccb97..26bed558c6b8 100644
--- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson I2C Controller
diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
index 4ac61fec90e2..243da7003cec 100644
--- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/apple,i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Apple/PASemi I2C controller
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index ea2303c0e143..6adedd3ec399 100644
--- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -75,7 +75,7 @@ required:
- clocks
allOf:
- - $ref: "i2c-controller.yaml"
+ - $ref: i2c-controller.yaml
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index 2e95cda7262a..7a675aa08c44 100644
--- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence I2C controller
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
index 6e0a5686af04..f34cc7ad5a00 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
@@ -45,7 +45,7 @@ properties:
i2c-parent:
description: phandle of the I2C bus that this multiplexer's master-side port is connected to
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
mux-gpios:
description: list of GPIOs used to control the muxer
@@ -55,7 +55,7 @@ properties:
idle-state:
description: Value to set the muxer to when idle. When no value is given, it defaults to the
last value used.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
allOf:
- $ref: i2c-mux.yaml
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 0e88c85985b5..9f66a3bb1f80 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Geni based QUP I2C Controller
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index bf396e9466aa..94b75d9f66cd 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -90,7 +90,7 @@ properties:
st,syscfg-fmp:
description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
Plus speed is selected by slave.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to syscfg
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 1b598638d457..658ae92fa86d 100644
--- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx IIC controller
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-03-22 17:35 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-22 17:35 Rob Herring [this message]
2023-03-22 17:35 ` [PATCH] dt-bindings: i2c: Drop unneeded quotes Rob Herring
2023-03-22 17:35 ` Rob Herring
2023-03-23 7:32 ` Krzysztof Kozlowski
2023-03-23 7:32 ` Krzysztof Kozlowski
2023-03-23 7:32 ` Krzysztof Kozlowski
2023-03-23 9:11 ` Neil Armstrong
2023-03-23 9:11 ` Neil Armstrong
2023-03-23 9:11 ` Neil Armstrong
2023-03-23 9:51 ` Nicolas Ferre
2023-03-23 9:51 ` Nicolas Ferre
2023-03-23 9:51 ` Nicolas Ferre
2023-03-23 13:41 ` [Linux-stm32] " Alain Volmat
2023-03-23 13:41 ` Alain Volmat
2023-03-23 13:41 ` Alain Volmat
2023-03-29 19:29 ` Wolfram Sang
2023-03-29 19:29 ` Wolfram Sang
2023-03-29 19:29 ` Wolfram Sang
-- strict thread matches above, loose matches on Subject: below --
2023-03-28 10:27 Hector Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230322173530.3971676-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=alyssa@rosenzweig.io \
--cc=andersson@kernel.org \
--cc=asahi@lists.linux.dev \
--cc=claudiu.beznea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marcan@marcan.st \
--cc=martin.blumenstingl@googlemail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=michal.simek@xilinx.com \
--cc=neil.armstrong@linaro.org \
--cc=nicolas.ferre@microchip.com \
--cc=peda@axentia.se \
--cc=sven@svenpeter.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.