All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, alistair.francis@wdc.com,
	bmeng@tinylab.org, liweiwei@iscas.ac.cn,
	zhiwei_liu@linux.alibaba.com, palmer@rivosinc.com,
	richard.henderson@linaro.org,
	Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Subject: [PATCH v2 01/19] target/riscv: sync env->misa_ext* with cpu->cfg in realize()
Date: Mon, 27 Mar 2023 19:49:16 -0300	[thread overview]
Message-ID: <20230327224934.363314-2-dbarboza@ventanamicro.com> (raw)
In-Reply-To: <20230327224934.363314-1-dbarboza@ventanamicro.com>

When riscv_cpu_realize() starts we're guaranteed to have cpu->cfg.ext_N
properties updated. The same can't be said about env->misa_ext*, since
the user might enable/disable MISA extensions in the command line, and
env->misa_ext* won't caught these changes. The current solution is to
sync everything at the end of validate_set_extensions(), checking every
cpu->cfg.ext_N value to do a set_misa() in the end.

The last change we're making in the MISA cfg flags are in the G
extension logic, enabling IMAFG if cpu->cfg_ext.g is enabled. Otherwise
we're not making any changes in MISA bits ever since realize() starts.

There's no reason to postpone misa_ext updates until the end of the
validation. Let's do it earlier, during realize(), in a new helper
called riscv_cpu_sync_misa_cfg(). If cpu->cfg.ext_g is enabled, do it
again by updating env->misa_ext* directly.

This is a pre-requisite to allow riscv_cpu_validate_set_extensions() to
use riscv_has_ext() instead of cpu->cfg.ext_N to validate the MISA
extensions, which is our end goal here.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
 target/riscv/cpu.c | 94 +++++++++++++++++++++++++++-------------------
 1 file changed, 56 insertions(+), 38 deletions(-)

diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 1e97473af2..2711d80e16 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -804,12 +804,11 @@ static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
 
 /*
  * Check consistency between chosen extensions while setting
- * cpu->cfg accordingly, doing a set_misa() in the end.
+ * cpu->cfg accordingly.
  */
 static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
 {
     CPURISCVState *env = &cpu->env;
-    uint32_t ext = 0;
 
     /* Do some ISA extension error checking */
     if (cpu->cfg.ext_g && !(cpu->cfg.ext_i && cpu->cfg.ext_m &&
@@ -824,6 +823,9 @@ static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
         cpu->cfg.ext_d = true;
         cpu->cfg.ext_icsr = true;
         cpu->cfg.ext_ifencei = true;
+
+        env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
+        env->misa_ext_mask = env->misa_ext;
     }
 
     if (cpu->cfg.ext_i && cpu->cfg.ext_e) {
@@ -962,39 +964,8 @@ static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
         cpu->cfg.ext_zksh = true;
     }
 
-    if (cpu->cfg.ext_i) {
-        ext |= RVI;
-    }
-    if (cpu->cfg.ext_e) {
-        ext |= RVE;
-    }
-    if (cpu->cfg.ext_m) {
-        ext |= RVM;
-    }
-    if (cpu->cfg.ext_a) {
-        ext |= RVA;
-    }
-    if (cpu->cfg.ext_f) {
-        ext |= RVF;
-    }
-    if (cpu->cfg.ext_d) {
-        ext |= RVD;
-    }
-    if (cpu->cfg.ext_c) {
-        ext |= RVC;
-    }
-    if (cpu->cfg.ext_s) {
-        ext |= RVS;
-    }
-    if (cpu->cfg.ext_u) {
-        ext |= RVU;
-    }
-    if (cpu->cfg.ext_h) {
-        ext |= RVH;
-    }
     if (cpu->cfg.ext_v) {
         int vext_version = VEXT_VERSION_1_00_0;
-        ext |= RVV;
         if (!is_power_of_2(cpu->cfg.vlen)) {
             error_setg(errp,
                        "Vector extension VLEN must be power of 2");
@@ -1032,11 +1003,6 @@ static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
         }
         set_vext_version(env, vext_version);
     }
-    if (cpu->cfg.ext_j) {
-        ext |= RVJ;
-    }
-
-    set_misa(env, env->misa_mxl, ext);
 }
 
 #ifndef CONFIG_USER_ONLY
@@ -1121,6 +1087,50 @@ static void riscv_cpu_finalize_features(RISCVCPU *cpu, Error **errp)
 #endif
 }
 
+static void riscv_cpu_sync_misa_cfg(CPURISCVState *env)
+{
+    uint32_t ext = 0;
+
+    if (riscv_cpu_cfg(env)->ext_i) {
+        ext |= RVI;
+    }
+    if (riscv_cpu_cfg(env)->ext_e) {
+        ext |= RVE;
+    }
+    if (riscv_cpu_cfg(env)->ext_m) {
+        ext |= RVM;
+    }
+    if (riscv_cpu_cfg(env)->ext_a) {
+        ext |= RVA;
+    }
+    if (riscv_cpu_cfg(env)->ext_f) {
+        ext |= RVF;
+    }
+    if (riscv_cpu_cfg(env)->ext_d) {
+        ext |= RVD;
+    }
+    if (riscv_cpu_cfg(env)->ext_c) {
+        ext |= RVC;
+    }
+    if (riscv_cpu_cfg(env)->ext_s) {
+        ext |= RVS;
+    }
+    if (riscv_cpu_cfg(env)->ext_u) {
+        ext |= RVU;
+    }
+    if (riscv_cpu_cfg(env)->ext_h) {
+        ext |= RVH;
+    }
+    if (riscv_cpu_cfg(env)->ext_v) {
+        ext |= RVV;
+    }
+    if (riscv_cpu_cfg(env)->ext_j) {
+        ext |= RVJ;
+    }
+
+    env->misa_ext = env->misa_ext_mask = ext;
+}
+
 static void riscv_cpu_realize(DeviceState *dev, Error **errp)
 {
     CPUState *cs = CPU(dev);
@@ -1156,6 +1166,14 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
         set_priv_version(env, priv_version);
     }
 
+    /*
+     * We can't be sure of whether we set defaults during cpu_init()
+     * or whether the user enabled/disabled some bits via cpu->cfg
+     * flags. Sync env->misa_ext with cpu->cfg now to allow us to
+     * use just env->misa_ext later.
+     */
+    riscv_cpu_sync_misa_cfg(env);
+
     /* Force disable extensions if priv spec version does not match */
     for (i = 0; i < ARRAY_SIZE(isa_edata_arr); i++) {
         if (isa_ext_is_enabled(cpu, &isa_edata_arr[i]) &&
-- 
2.39.2



  reply	other threads:[~2023-03-27 22:49 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-27 22:49 [PATCH v2 00/19] remove MISA ext_N flags from cpu->cfg Daniel Henrique Barboza
2023-03-27 22:49 ` Daniel Henrique Barboza [this message]
2023-03-27 22:49 ` [PATCH v2 02/19] target/riscv: remove MISA properties from isa_edata_arr[] Daniel Henrique Barboza
2023-03-29  8:32   ` liweiwei
2023-03-29 15:17     ` Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 03/19] target/riscv: introduce riscv_cpu_add_misa_properties() Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 04/19] target/riscv: remove cpu->cfg.ext_a Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 05/19] target/riscv: remove cpu->cfg.ext_c Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 06/19] target/riscv: remove cpu->cfg.ext_d Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 07/19] target/riscv: remove cpu->cfg.ext_f Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 08/19] target/riscv: remove cpu->cfg.ext_i Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 09/19] target/riscv: remove cpu->cfg.ext_e Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 10/19] target/riscv: remove cpu->cfg.ext_m Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 11/19] target/riscv: remove cpu->cfg.ext_s Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 12/19] target/riscv: remove cpu->cfg.ext_u Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 13/19] target/riscv: remove cpu->cfg.ext_h Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 14/19] target/riscv: remove cpu->cfg.ext_j Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 15/19] target/riscv: remove cpu->cfg.ext_v Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 16/19] target/riscv: remove riscv_cpu_sync_misa_cfg() Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 17/19] target/riscv: remove cfg.ext_g setup from rv64_thead_c906_cpu_init() Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 18/19] target/riscv: add RVG and remove cpu->cfg.ext_g Daniel Henrique Barboza
2023-03-27 22:49 ` [PATCH v2 19/19] target/riscv/cpu.c: redesign register_cpu_props() Daniel Henrique Barboza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230327224934.363314-2-dbarboza@ventanamicro.com \
    --to=dbarboza@ventanamicro.com \
    --cc=alistair.francis@wdc.com \
    --cc=bmeng@tinylab.org \
    --cc=liweiwei@iscas.ac.cn \
    --cc=palmer@rivosinc.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=zhiwei_liu@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.