All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@kernel.org>
To: nm@ti.com, vigneshr@ti.com
Cc: kristo@kernel.org, srk@ti.com, r-gunasekaran@ti.com,
	linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Roger Quadros <rogerq@kernel.org>
Subject: [PATCH v2 2/2] arm64: dts: ti: k3-am625-sk: Enable Type-C port for USB0
Date: Tue, 28 Mar 2023 15:43:15 +0300	[thread overview]
Message-ID: <20230328124315.123778-3-rogerq@kernel.org> (raw)
In-Reply-To: <20230328124315.123778-1-rogerq@kernel.org>

USB0 is a Type-C port with dual data role and power sink.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts      |  4 ++
 arch/arm64/boot/dts/ti/k3-am625-sk.dts        | 44 ++++++++++++++++++-
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |  4 --
 3 files changed, 47 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index b2ca19e3042e..a3c3609833fd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -225,3 +225,7 @@ ldo4_reg: ldo4 {
 		};
 	};
 };
+
+&usb0 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index cdc0858dd1b2..13fdaa9ce4e7 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -136,6 +136,35 @@ AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
 	};
 };
 
+&main_i2c0 {
+	typec_pd: tps6598x@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+		interrupt-parent = <&exp1>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "irq";
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usb_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs_ep>;
+					};
+				};
+			};
+		};
+	};
+};
+
 &main_i2c1 {
 	exp1: gpio@22 {
 		compatible = "ti,tca6424";
@@ -150,7 +179,7 @@ exp1: gpio@22 {
 				   "UART1_FET_BUF_EN", "WL_LT_EN",
 				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
 				   "CSI_GPIO2", "PRU_3V3_EN",
-				   "HDMI_INTn", "TEST_GPIO2",
+				   "HDMI_INTn", "PD_I2C_IRQ",
 				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
 				   "MCASP1_FET_SEL", "UART1_FET_SEL",
 				   "TSINT#", "IO_EXP_TEST_LED";
@@ -256,3 +285,16 @@ partition@3fc0000 {
 		};
 	};
 };
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-role-switch;
+
+	port@0 {
+		reg = <0>;
+		usb0_hs_ep: endpoint {
+		    remote-endpoint = <&usb_con_hs>;
+	       };
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 80e8b9b9a5f5..e3223088b90c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -264,10 +264,6 @@ &usbss1 {
 	ti,vbus-divider;
 };
 
-&usb0 {
-	dr_mode = "peripheral";
-};
-
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@kernel.org>
To: nm@ti.com, vigneshr@ti.com
Cc: kristo@kernel.org, srk@ti.com, r-gunasekaran@ti.com,
	linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Roger Quadros <rogerq@kernel.org>
Subject: [PATCH v2 2/2] arm64: dts: ti: k3-am625-sk: Enable Type-C port for USB0
Date: Tue, 28 Mar 2023 15:43:15 +0300	[thread overview]
Message-ID: <20230328124315.123778-3-rogerq@kernel.org> (raw)
In-Reply-To: <20230328124315.123778-1-rogerq@kernel.org>

USB0 is a Type-C port with dual data role and power sink.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts      |  4 ++
 arch/arm64/boot/dts/ti/k3-am625-sk.dts        | 44 ++++++++++++++++++-
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |  4 --
 3 files changed, 47 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index b2ca19e3042e..a3c3609833fd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -225,3 +225,7 @@ ldo4_reg: ldo4 {
 		};
 	};
 };
+
+&usb0 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index cdc0858dd1b2..13fdaa9ce4e7 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -136,6 +136,35 @@ AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
 	};
 };
 
+&main_i2c0 {
+	typec_pd: tps6598x@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+		interrupt-parent = <&exp1>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "irq";
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usb_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs_ep>;
+					};
+				};
+			};
+		};
+	};
+};
+
 &main_i2c1 {
 	exp1: gpio@22 {
 		compatible = "ti,tca6424";
@@ -150,7 +179,7 @@ exp1: gpio@22 {
 				   "UART1_FET_BUF_EN", "WL_LT_EN",
 				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
 				   "CSI_GPIO2", "PRU_3V3_EN",
-				   "HDMI_INTn", "TEST_GPIO2",
+				   "HDMI_INTn", "PD_I2C_IRQ",
 				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
 				   "MCASP1_FET_SEL", "UART1_FET_SEL",
 				   "TSINT#", "IO_EXP_TEST_LED";
@@ -256,3 +285,16 @@ partition@3fc0000 {
 		};
 	};
 };
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-role-switch;
+
+	port@0 {
+		reg = <0>;
+		usb0_hs_ep: endpoint {
+		    remote-endpoint = <&usb_con_hs>;
+	       };
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 80e8b9b9a5f5..e3223088b90c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -264,10 +264,6 @@ &usbss1 {
 	ti,vbus-divider;
 };
 
-&usb0 {
-	dr_mode = "peripheral";
-};
-
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-03-28 12:43 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-28 12:43 [PATCH v2 0/2] arm64: dts: ti: k3-am625-sk: Enable Type-C dual-role Roger Quadros
2023-03-28 12:43 ` Roger Quadros
2023-03-28 12:43 ` [PATCH v2 1/2] arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1 Roger Quadros
2023-03-28 12:43   ` Roger Quadros
2023-03-28 12:43 ` Roger Quadros [this message]
2023-03-28 12:43   ` [PATCH v2 2/2] arm64: dts: ti: k3-am625-sk: Enable Type-C port for USB0 Roger Quadros
2023-03-28 13:18   ` Nishanth Menon
2023-03-28 13:18     ` Nishanth Menon
2023-03-28 13:20     ` Roger Quadros
2023-03-28 13:20       ` Roger Quadros
2023-03-28 13:30       ` Nishanth Menon
2023-03-28 13:30         ` Nishanth Menon
2023-03-28 19:46         ` Roger Quadros
2023-03-28 19:46           ` Roger Quadros
2023-03-28 21:52           ` Nishanth Menon
2023-03-28 21:52             ` Nishanth Menon
2023-03-29  7:06             ` Roger Quadros
2023-03-29  7:06               ` Roger Quadros
2023-03-30  2:16 ` (subset) [PATCH v2 0/2] arm64: dts: ti: k3-am625-sk: Enable Type-C dual-role Nishanth Menon
2023-03-30  2:16   ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230328124315.123778-3-rogerq@kernel.org \
    --to=rogerq@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=r-gunasekaran@ti.com \
    --cc=srk@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.