From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <michael@walle.cc>, <linux-mtd@lists.infradead.org>
Cc: Julien Su <juliensu@mxic.com.tw>,
Jaime Liao <jaimeliao@mxic.com.tw>,
Jaime Liao <jaimeliao.tw@gmail.com>,
Alvin Zhou <alvinzhou@mxic.com.tw>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Michal Simek <monstr@monstr.eu>,
<linux-arm-kernel@lists.infradead.org>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v5 2/8] mtd: spi-nor: Add a macro to define more banks
Date: Tue, 28 Mar 2023 17:40:59 +0200 [thread overview]
Message-ID: <20230328154105.448540-3-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20230328154105.448540-1-miquel.raynal@bootlin.com>
Most of the chips on the market only feature a single bank. However, new
chips may support more than a single bank, with the possibility to
parallelize some operations. Let's introduce an INFOB() macro which also
takes a n_bank parameter.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
---
drivers/mtd/spi-nor/core.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index db0e458810c7..bf2e64671856 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -555,6 +555,10 @@ struct flash_info {
SPI_NOR_ID((_jedec_id), (_ext_id)), \
SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+#define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks) \
+ SPI_NOR_ID((_jedec_id), (_ext_id)), \
+ SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), (_n_banks)),
+
#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors) \
SPI_NOR_ID6((_jedec_id), (_ext_id)), \
SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
--
2.34.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <michael@walle.cc>, <linux-mtd@lists.infradead.org>
Cc: Julien Su <juliensu@mxic.com.tw>,
Jaime Liao <jaimeliao@mxic.com.tw>,
Jaime Liao <jaimeliao.tw@gmail.com>,
Alvin Zhou <alvinzhou@mxic.com.tw>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Michal Simek <monstr@monstr.eu>,
<linux-arm-kernel@lists.infradead.org>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v5 2/8] mtd: spi-nor: Add a macro to define more banks
Date: Tue, 28 Mar 2023 17:40:59 +0200 [thread overview]
Message-ID: <20230328154105.448540-3-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20230328154105.448540-1-miquel.raynal@bootlin.com>
Most of the chips on the market only feature a single bank. However, new
chips may support more than a single bank, with the possibility to
parallelize some operations. Let's introduce an INFOB() macro which also
takes a n_bank parameter.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
---
drivers/mtd/spi-nor/core.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index db0e458810c7..bf2e64671856 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -555,6 +555,10 @@ struct flash_info {
SPI_NOR_ID((_jedec_id), (_ext_id)), \
SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+#define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks) \
+ SPI_NOR_ID((_jedec_id), (_ext_id)), \
+ SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), (_n_banks)),
+
#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors) \
SPI_NOR_ID6((_jedec_id), (_ext_id)), \
SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-28 15:42 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-28 15:40 [PATCH v5 0/8] mtd: spi-nor: read while write support Miquel Raynal
2023-03-28 15:40 ` Miquel Raynal
2023-03-28 15:40 ` [PATCH v5 1/8] mtd: spi-nor: Introduce the concept of bank Miquel Raynal
2023-03-28 15:40 ` Miquel Raynal
2023-03-28 15:40 ` Miquel Raynal [this message]
2023-03-28 15:40 ` [PATCH v5 2/8] mtd: spi-nor: Add a macro to define more banks Miquel Raynal
2023-03-28 15:41 ` [PATCH v5 3/8] mtd: spi-nor: Reorder the preparation vs. locking steps Miquel Raynal
2023-03-28 15:41 ` Miquel Raynal
2023-03-28 15:41 ` [PATCH v5 4/8] mtd: spi-nor: Separate preparation and locking Miquel Raynal
2023-03-28 15:41 ` Miquel Raynal
2023-03-28 15:41 ` [PATCH v5 5/8] mtd: spi-nor: Prepare the introduction of a new locking mechanism Miquel Raynal
2023-03-28 15:41 ` Miquel Raynal
2023-03-28 15:41 ` [PATCH v5 6/8] mtd: spi-nor: Add a RWW flag Miquel Raynal
2023-03-28 15:41 ` Miquel Raynal
2023-03-28 15:41 ` [PATCH v5 7/8] mtd: spi-nor: Enhance locking to support reads while writes Miquel Raynal
2023-03-28 15:41 ` Miquel Raynal
2023-03-28 15:41 ` [PATCH v5 8/8] mtd: spi-nor: macronix: Add support for mx25uw51245g with RWW Miquel Raynal
2023-03-28 15:41 ` Miquel Raynal
2023-03-28 16:31 ` Tudor Ambarus
2023-03-28 16:31 ` Tudor Ambarus
2023-03-28 16:45 ` Miquel Raynal
2023-03-28 16:45 ` Miquel Raynal
2023-03-29 5:48 ` liao jaime
2023-03-29 5:48 ` liao jaime
2023-03-29 11:12 ` Tudor Ambarus
2023-03-29 11:12 ` Tudor Ambarus
2023-03-29 11:54 ` Miquel Raynal
2023-03-29 11:54 ` Miquel Raynal
2023-03-31 19:37 ` Miquel Raynal
2023-03-31 19:37 ` Miquel Raynal
2023-04-03 8:08 ` Tudor Ambarus
2023-04-03 8:08 ` Tudor Ambarus
2023-03-29 10:49 ` Re (subset): [PATCH v5 0/8] mtd: spi-nor: read while write support Tudor Ambarus
2023-03-29 10:49 ` Tudor Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230328154105.448540-3-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=alvinzhou@mxic.com.tw \
--cc=jaimeliao.tw@gmail.com \
--cc=jaimeliao@mxic.com.tw \
--cc=juliensu@mxic.com.tw \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=monstr@monstr.eu \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=thomas.petazzoni@bootlin.com \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.