From: Bang Li <libang.linuxer@gmail.com>
To: miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
Bang Li <libang.linuxer@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH v2] mtdblock: tolerate corrected bit-flips
Date: Wed, 29 Mar 2023 00:30:12 +0800 [thread overview]
Message-ID: <20230328163012.4264-1-libang.linuxer@gmail.com> (raw)
mtd_read() may return -EUCLEAN in case of corrected bit-flips.This
particular condition should not be treated like an error.
Signed-off-by: Bang Li <libang.linuxer@gmail.com>
Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
Cc: <stable@vger.kernel.org> # v3.7
---
Changes since v1:
- Resend this patch with Cc and Fixes tags
---
drivers/mtd/mtdblock.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 1e94e7d10b8b..a0a1194dc1d9 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -153,7 +153,7 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos,
mtdblk->cache_state = STATE_EMPTY;
ret = mtd_read(mtd, sect_start, sect_size,
&retlen, mtdblk->cache_data);
- if (ret)
+ if (ret && !mtd_is_bitflip(ret))
return ret;
if (retlen != sect_size)
return -EIO;
@@ -188,8 +188,12 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
pr_debug("mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
mtd->name, pos, len);
- if (!sect_size)
- return mtd_read(mtd, pos, len, &retlen, buf);
+ if (!sect_size) {
+ ret = mtd_read(mtd, pos, len, &retlen, buf);
+ if (ret && !mtd_is_bitflip(ret))
+ return ret;
+ return 0;
+ }
while (len > 0) {
unsigned long sect_start = (pos/sect_size)*sect_size;
@@ -209,7 +213,7 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
memcpy (buf, mtdblk->cache_data + offset, size);
} else {
ret = mtd_read(mtd, pos, size, &retlen, buf);
- if (ret)
+ if (ret && !mtd_is_bitflip(ret))
return ret;
if (retlen != size)
return -EIO;
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Bang Li <libang.linuxer@gmail.com>
To: miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
Bang Li <libang.linuxer@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH v2] mtdblock: tolerate corrected bit-flips
Date: Wed, 29 Mar 2023 00:30:12 +0800 [thread overview]
Message-ID: <20230328163012.4264-1-libang.linuxer@gmail.com> (raw)
mtd_read() may return -EUCLEAN in case of corrected bit-flips.This
particular condition should not be treated like an error.
Signed-off-by: Bang Li <libang.linuxer@gmail.com>
Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
Cc: <stable@vger.kernel.org> # v3.7
---
Changes since v1:
- Resend this patch with Cc and Fixes tags
---
drivers/mtd/mtdblock.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 1e94e7d10b8b..a0a1194dc1d9 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -153,7 +153,7 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos,
mtdblk->cache_state = STATE_EMPTY;
ret = mtd_read(mtd, sect_start, sect_size,
&retlen, mtdblk->cache_data);
- if (ret)
+ if (ret && !mtd_is_bitflip(ret))
return ret;
if (retlen != sect_size)
return -EIO;
@@ -188,8 +188,12 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
pr_debug("mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
mtd->name, pos, len);
- if (!sect_size)
- return mtd_read(mtd, pos, len, &retlen, buf);
+ if (!sect_size) {
+ ret = mtd_read(mtd, pos, len, &retlen, buf);
+ if (ret && !mtd_is_bitflip(ret))
+ return ret;
+ return 0;
+ }
while (len > 0) {
unsigned long sect_start = (pos/sect_size)*sect_size;
@@ -209,7 +213,7 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
memcpy (buf, mtdblk->cache_data + offset, size);
} else {
ret = mtd_read(mtd, pos, size, &retlen, buf);
- if (ret)
+ if (ret && !mtd_is_bitflip(ret))
return ret;
if (retlen != size)
return -EIO;
--
2.25.1
next reply other threads:[~2023-03-28 16:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-28 16:30 Bang Li [this message]
2023-03-28 16:30 ` [PATCH v2] mtdblock: tolerate corrected bit-flips Bang Li
2023-03-28 16:51 ` Richard Weinberger
2023-03-28 16:51 ` Richard Weinberger
2023-04-03 15:59 ` Miquel Raynal
2023-04-03 15:59 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230328163012.4264-1-libang.linuxer@gmail.com \
--to=libang.linuxer@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=stable@vger.kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.