All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Jon Hunter <jonathanh@nvidia.com>,
	linux-tegra@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] arm64: tegra: Add Jetson Orin NX support
Date: Wed, 29 Mar 2023 17:07:09 +0200	[thread overview]
Message-ID: <20230329150710.773441-4-thierry.reding@gmail.com> (raw)
In-Reply-To: <20230329150710.773441-1-thierry.reding@gmail.com>

From: Thierry Reding <treding@nvidia.com>

This adds a device tree for the Jetson Orin NX module, which is Jetson
AGX Orin's little sibling with 6 or 8 ARM Cortex-A78AE cores, an Ampere
GPU (1024 GPU and 32 tensor cores) and a number of accelerators for
machine learning, image processing and more.

The Jetson Orin NX comes with either 8 or 16 GiB of 128-bit LPDDR5 and
supports NVME for mass storage.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v2:
- add SPI flash and SD card to make UEFI happy

 .../boot/dts/nvidia/tegra234-p3767-0000.dtsi  | 193 ++++++++++++++++++
 1 file changed, 193 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
new file mode 100644
index 000000000000..82674256d720
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Orin NX";
+	compatible = "nvidia,p3767-0000", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <136000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		/* UEFI needs this but it's not there on all boards */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+			disable-wp;
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <33000000>;
+		regulator-max-microvolt = <33000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
+			status = "okay";
+
+			trips {
+				critical {
+					temperature = <104500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				hot {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				board_trip_passive: passive {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				board_trip_active2: active-2 {
+					temperature = <80000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				board_trip_active1: active-1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				board_trip_active0: active-0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				passive {
+					cooling-device = <&fan 3 3>;
+					trip = <&board_trip_passive>;
+				};
+
+				active2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&board_trip_active2>;
+				};
+
+				active1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&board_trip_active1>;
+				};
+
+				active0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&board_trip_active0>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			status = "okay";
+		};
+
+		cv0-thermal {
+			status = "okay";
+		};
+
+		cv1-thermal {
+			status = "okay";
+		};
+
+		cv2-thermal {
+			status = "okay";
+		};
+
+		soc0-thermal {
+			status = "okay";
+		};
+
+		soc1-thermal {
+			status = "okay";
+		};
+
+		soc2-thermal {
+			status = "okay";
+		};
+
+		tj-thermal {
+			status = "okay";
+		};
+	};
+};
-- 
2.40.0


WARNING: multiple messages have this Message-ID (diff)
From: Thierry Reding <thierry.reding@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Jon Hunter <jonathanh@nvidia.com>,
	linux-tegra@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] arm64: tegra: Add Jetson Orin NX support
Date: Wed, 29 Mar 2023 17:07:09 +0200	[thread overview]
Message-ID: <20230329150710.773441-4-thierry.reding@gmail.com> (raw)
In-Reply-To: <20230329150710.773441-1-thierry.reding@gmail.com>

From: Thierry Reding <treding@nvidia.com>

This adds a device tree for the Jetson Orin NX module, which is Jetson
AGX Orin's little sibling with 6 or 8 ARM Cortex-A78AE cores, an Ampere
GPU (1024 GPU and 32 tensor cores) and a number of accelerators for
machine learning, image processing and more.

The Jetson Orin NX comes with either 8 or 16 GiB of 128-bit LPDDR5 and
supports NVME for mass storage.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v2:
- add SPI flash and SD card to make UEFI happy

 .../boot/dts/nvidia/tegra234-p3767-0000.dtsi  | 193 ++++++++++++++++++
 1 file changed, 193 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
new file mode 100644
index 000000000000..82674256d720
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Orin NX";
+	compatible = "nvidia,p3767-0000", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <136000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		/* UEFI needs this but it's not there on all boards */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+			disable-wp;
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <33000000>;
+		regulator-max-microvolt = <33000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
+			status = "okay";
+
+			trips {
+				critical {
+					temperature = <104500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				hot {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				board_trip_passive: passive {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				board_trip_active2: active-2 {
+					temperature = <80000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				board_trip_active1: active-1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				board_trip_active0: active-0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				passive {
+					cooling-device = <&fan 3 3>;
+					trip = <&board_trip_passive>;
+				};
+
+				active2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&board_trip_active2>;
+				};
+
+				active1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&board_trip_active1>;
+				};
+
+				active0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&board_trip_active0>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			status = "okay";
+		};
+
+		cv0-thermal {
+			status = "okay";
+		};
+
+		cv1-thermal {
+			status = "okay";
+		};
+
+		cv2-thermal {
+			status = "okay";
+		};
+
+		soc0-thermal {
+			status = "okay";
+		};
+
+		soc1-thermal {
+			status = "okay";
+		};
+
+		soc2-thermal {
+			status = "okay";
+		};
+
+		tj-thermal {
+			status = "okay";
+		};
+	};
+};
-- 
2.40.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-03-29 15:07 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-29 15:07 [PATCH v2 0/4] arm64: tegra: Add Jetson Orin NX support Thierry Reding
2023-03-29 15:07 ` Thierry Reding
2023-03-29 15:07 ` [PATCH v2 1/4] dt-bindings: tegra: Document Jetson Orin NX Thierry Reding
2023-03-29 15:07   ` Thierry Reding
2023-03-29 15:07 ` [PATCH v2 2/4] dt-bindings: tegra: Document P3768+P3767 reference platform Thierry Reding
2023-03-29 15:07   ` Thierry Reding
2023-03-30  7:43   ` Krzysztof Kozlowski
2023-03-30  7:43     ` Krzysztof Kozlowski
2023-03-29 15:07 ` Thierry Reding [this message]
2023-03-29 15:07   ` [PATCH v2 3/4] arm64: tegra: Add Jetson Orin NX support Thierry Reding
2023-03-29 15:07 ` [PATCH v2 4/4] arm64: tegra: Add support for P3768+P3767 Thierry Reding
2023-03-29 15:07   ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230329150710.773441-4-thierry.reding@gmail.com \
    --to=thierry.reding@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.