All of lore.kernel.org
 help / color / mirror / Atom feed
From: Walker Chen <walker.chen@starfivetech.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor.dooley@microchip.com>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Walker Chen <walker.chen@starfivetech.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org
Subject: [PATCH v1 3/3] riscv: dts: starfive: add tdm node and sound card
Date: Wed, 29 Mar 2023 23:33:20 +0800	[thread overview]
Message-ID: <20230329153320.31390-4-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230329153320.31390-1-walker.chen@starfivetech.com>

Add the tdm controller node and sound card for the StarFive JH7110 SoC.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 87 +++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 34 ++++++++
 2 files changed, 121 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..35137c2edf5d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -62,6 +62,10 @@
 	clock-frequency = <297000000>;
 };
 
+&wm8960_mclk {
+	clock-frequency = <24576000>;
+};
+
 &i2srx_bclk_ext {
 	clock-frequency = <12288000>;
 };
@@ -102,6 +106,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+
+		wlf,shared-lrclk;
+	};
 };
 
 &i2c2 {
@@ -214,6 +226,40 @@
 			slew-rate = <0>;
 		};
 	};
+
+	tdm0_pins: tdm0-pins {
+		tdm0-pins-tx {
+			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		tdm0-pins-rx {
+			pinmux = <GPIOMUX(61, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_RXD)>;
+			input-enable;
+		};
+
+		tdm0-pins-sync {
+			pinmux = <GPIOMUX(63, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_SYNC)>;
+			input-enable;
+		};
+
+		tdm0-pins-pcmclk {
+			pinmux = <GPIOMUX(38, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_CLK)>;
+			input-enable;
+		};
+	};
 };
 
 &uart0 {
@@ -221,3 +267,44 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&tdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tdm0_pins>;
+	status = "okay";
+};
+
+&sound0 {
+	simple-audio-card,dai-link@0 {
+		reg = <0>;
+		status = "okay";
+		format = "dsp_a";
+		bitclock-master = <&dailink_master>;
+		frame-master = <&dailink_master>;
+
+		widgets =
+				"Microphone", "Mic Jack",
+				"Line", "Line In",
+				"Line", "Line Out",
+				"Speaker", "Speaker",
+				"Headphone", "Headphone Jack";
+		routing =
+				"Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Speaker", "SPK_LP",
+				"Speaker", "SPK_LN",
+				"LINPUT1", "Mic Jack",
+				"LINPUT3", "Mic Jack",
+				"RINPUT1", "Mic Jack",
+				"RINPUT2", "Mic Jack";
+		cpu {
+			sound-dai = <&tdm>;
+		};
+
+		dailink_master:codec {
+			sound-dai = <&wm8960>;
+			clocks = <&wm8960_mclk>;
+			clock-names = "mclk";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index b503b6137743..a89158d1d7a6 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -210,6 +210,12 @@
 		#clock-cells = <0>;
 	};
 
+	wm8960_mclk: wm8960_mclk {
+		compatible = "fixed-clock";
+		clock-output-names = "wm8960_mclk";
+		#clock-cells = <0>;
+	};
+
 	i2srx_bclk_ext: i2srx-bclk-ext-clock {
 		compatible = "fixed-clock";
 		clock-output-names = "i2srx_bclk_ext";
@@ -375,6 +381,27 @@
 			status = "disabled";
 		};
 
+		tdm: tdm@10090000 {
+			compatible = "starfive,jh7110-tdm";
+			reg = <0x0 0x10090000 0x0 0x1000>;
+			clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+				 <&syscrg JH7110_SYSCLK_TDM_APB>,
+				 <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+				 <&syscrg JH7110_SYSCLK_TDM_TDM>,
+				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+				 <&tdm_ext>;
+			clock-names = "tdm_ahb", "tdm_apb",
+				      "tdm_internal", "tdm",
+				      "mclk_inner", "tdm_ext";
+			resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+				 <&syscrg JH7110_SYSRST_TDM_APB>,
+				 <&syscrg JH7110_SYSRST_TDM_CORE>;
+			dmas = <&dma 20>, <&dma 21>;
+			dma-names = "rx","tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
 		stgcrg: clock-controller@10230000 {
 			compatible = "starfive,jh7110-stgcrg";
 			reg = <0x0 0x10230000 0x0 0x10000>;
@@ -601,5 +628,12 @@
 			#reset-cells = <1>;
 			power-domains = <&pwrc JH7110_PD_VOUT>;
 		};
+
+		sound0: snd-card0 {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "Starfive-TDM-Sound-Card";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Walker Chen <walker.chen@starfivetech.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor.dooley@microchip.com>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Walker Chen <walker.chen@starfivetech.com>
Cc: <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
Subject: [PATCH v1 3/3] riscv: dts: starfive: add tdm node and sound card
Date: Wed, 29 Mar 2023 23:33:20 +0800	[thread overview]
Message-ID: <20230329153320.31390-4-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230329153320.31390-1-walker.chen@starfivetech.com>

Add the tdm controller node and sound card for the StarFive JH7110 SoC.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 87 +++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 34 ++++++++
 2 files changed, 121 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..35137c2edf5d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -62,6 +62,10 @@
 	clock-frequency = <297000000>;
 };
 
+&wm8960_mclk {
+	clock-frequency = <24576000>;
+};
+
 &i2srx_bclk_ext {
 	clock-frequency = <12288000>;
 };
@@ -102,6 +106,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+
+		wlf,shared-lrclk;
+	};
 };
 
 &i2c2 {
@@ -214,6 +226,40 @@
 			slew-rate = <0>;
 		};
 	};
+
+	tdm0_pins: tdm0-pins {
+		tdm0-pins-tx {
+			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		tdm0-pins-rx {
+			pinmux = <GPIOMUX(61, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_RXD)>;
+			input-enable;
+		};
+
+		tdm0-pins-sync {
+			pinmux = <GPIOMUX(63, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_SYNC)>;
+			input-enable;
+		};
+
+		tdm0-pins-pcmclk {
+			pinmux = <GPIOMUX(38, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_CLK)>;
+			input-enable;
+		};
+	};
 };
 
 &uart0 {
@@ -221,3 +267,44 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&tdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tdm0_pins>;
+	status = "okay";
+};
+
+&sound0 {
+	simple-audio-card,dai-link@0 {
+		reg = <0>;
+		status = "okay";
+		format = "dsp_a";
+		bitclock-master = <&dailink_master>;
+		frame-master = <&dailink_master>;
+
+		widgets =
+				"Microphone", "Mic Jack",
+				"Line", "Line In",
+				"Line", "Line Out",
+				"Speaker", "Speaker",
+				"Headphone", "Headphone Jack";
+		routing =
+				"Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Speaker", "SPK_LP",
+				"Speaker", "SPK_LN",
+				"LINPUT1", "Mic Jack",
+				"LINPUT3", "Mic Jack",
+				"RINPUT1", "Mic Jack",
+				"RINPUT2", "Mic Jack";
+		cpu {
+			sound-dai = <&tdm>;
+		};
+
+		dailink_master:codec {
+			sound-dai = <&wm8960>;
+			clocks = <&wm8960_mclk>;
+			clock-names = "mclk";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index b503b6137743..a89158d1d7a6 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -210,6 +210,12 @@
 		#clock-cells = <0>;
 	};
 
+	wm8960_mclk: wm8960_mclk {
+		compatible = "fixed-clock";
+		clock-output-names = "wm8960_mclk";
+		#clock-cells = <0>;
+	};
+
 	i2srx_bclk_ext: i2srx-bclk-ext-clock {
 		compatible = "fixed-clock";
 		clock-output-names = "i2srx_bclk_ext";
@@ -375,6 +381,27 @@
 			status = "disabled";
 		};
 
+		tdm: tdm@10090000 {
+			compatible = "starfive,jh7110-tdm";
+			reg = <0x0 0x10090000 0x0 0x1000>;
+			clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+				 <&syscrg JH7110_SYSCLK_TDM_APB>,
+				 <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+				 <&syscrg JH7110_SYSCLK_TDM_TDM>,
+				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+				 <&tdm_ext>;
+			clock-names = "tdm_ahb", "tdm_apb",
+				      "tdm_internal", "tdm",
+				      "mclk_inner", "tdm_ext";
+			resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+				 <&syscrg JH7110_SYSRST_TDM_APB>,
+				 <&syscrg JH7110_SYSRST_TDM_CORE>;
+			dmas = <&dma 20>, <&dma 21>;
+			dma-names = "rx","tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
 		stgcrg: clock-controller@10230000 {
 			compatible = "starfive,jh7110-stgcrg";
 			reg = <0x0 0x10230000 0x0 0x10000>;
@@ -601,5 +628,12 @@
 			#reset-cells = <1>;
 			power-domains = <&pwrc JH7110_PD_VOUT>;
 		};
+
+		sound0: snd-card0 {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "Starfive-TDM-Sound-Card";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };
-- 
2.17.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Walker Chen <walker.chen@starfivetech.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor.dooley@microchip.com>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Walker Chen <walker.chen@starfivetech.com>
Cc: <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
Subject: [PATCH v1 3/3] riscv: dts: starfive: add tdm node and sound card
Date: Wed, 29 Mar 2023 23:33:20 +0800	[thread overview]
Message-ID: <20230329153320.31390-4-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230329153320.31390-1-walker.chen@starfivetech.com>

Add the tdm controller node and sound card for the StarFive JH7110 SoC.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 87 +++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 34 ++++++++
 2 files changed, 121 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..35137c2edf5d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -62,6 +62,10 @@
 	clock-frequency = <297000000>;
 };
 
+&wm8960_mclk {
+	clock-frequency = <24576000>;
+};
+
 &i2srx_bclk_ext {
 	clock-frequency = <12288000>;
 };
@@ -102,6 +106,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+
+		wlf,shared-lrclk;
+	};
 };
 
 &i2c2 {
@@ -214,6 +226,40 @@
 			slew-rate = <0>;
 		};
 	};
+
+	tdm0_pins: tdm0-pins {
+		tdm0-pins-tx {
+			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		tdm0-pins-rx {
+			pinmux = <GPIOMUX(61, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_RXD)>;
+			input-enable;
+		};
+
+		tdm0-pins-sync {
+			pinmux = <GPIOMUX(63, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_SYNC)>;
+			input-enable;
+		};
+
+		tdm0-pins-pcmclk {
+			pinmux = <GPIOMUX(38, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_CLK)>;
+			input-enable;
+		};
+	};
 };
 
 &uart0 {
@@ -221,3 +267,44 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&tdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tdm0_pins>;
+	status = "okay";
+};
+
+&sound0 {
+	simple-audio-card,dai-link@0 {
+		reg = <0>;
+		status = "okay";
+		format = "dsp_a";
+		bitclock-master = <&dailink_master>;
+		frame-master = <&dailink_master>;
+
+		widgets =
+				"Microphone", "Mic Jack",
+				"Line", "Line In",
+				"Line", "Line Out",
+				"Speaker", "Speaker",
+				"Headphone", "Headphone Jack";
+		routing =
+				"Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Speaker", "SPK_LP",
+				"Speaker", "SPK_LN",
+				"LINPUT1", "Mic Jack",
+				"LINPUT3", "Mic Jack",
+				"RINPUT1", "Mic Jack",
+				"RINPUT2", "Mic Jack";
+		cpu {
+			sound-dai = <&tdm>;
+		};
+
+		dailink_master:codec {
+			sound-dai = <&wm8960>;
+			clocks = <&wm8960_mclk>;
+			clock-names = "mclk";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index b503b6137743..a89158d1d7a6 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -210,6 +210,12 @@
 		#clock-cells = <0>;
 	};
 
+	wm8960_mclk: wm8960_mclk {
+		compatible = "fixed-clock";
+		clock-output-names = "wm8960_mclk";
+		#clock-cells = <0>;
+	};
+
 	i2srx_bclk_ext: i2srx-bclk-ext-clock {
 		compatible = "fixed-clock";
 		clock-output-names = "i2srx_bclk_ext";
@@ -375,6 +381,27 @@
 			status = "disabled";
 		};
 
+		tdm: tdm@10090000 {
+			compatible = "starfive,jh7110-tdm";
+			reg = <0x0 0x10090000 0x0 0x1000>;
+			clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+				 <&syscrg JH7110_SYSCLK_TDM_APB>,
+				 <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+				 <&syscrg JH7110_SYSCLK_TDM_TDM>,
+				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+				 <&tdm_ext>;
+			clock-names = "tdm_ahb", "tdm_apb",
+				      "tdm_internal", "tdm",
+				      "mclk_inner", "tdm_ext";
+			resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+				 <&syscrg JH7110_SYSRST_TDM_APB>,
+				 <&syscrg JH7110_SYSRST_TDM_CORE>;
+			dmas = <&dma 20>, <&dma 21>;
+			dma-names = "rx","tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
 		stgcrg: clock-controller@10230000 {
 			compatible = "starfive,jh7110-stgcrg";
 			reg = <0x0 0x10230000 0x0 0x10000>;
@@ -601,5 +628,12 @@
 			#reset-cells = <1>;
 			power-domains = <&pwrc JH7110_PD_VOUT>;
 		};
+
+		sound0: snd-card0 {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "Starfive-TDM-Sound-Card";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };
-- 
2.17.1


  parent reply	other threads:[~2023-03-29 16:14 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-29 15:33 [PATCH v1 0/3] Add TDM audio on StarFive JH7110 Walker Chen
2023-03-29 15:33 ` Walker Chen
2023-03-29 15:33 ` Walker Chen
2023-03-29 15:33 ` [PATCH v1 1/3] dt-bindings: sound: Add TDM for " Walker Chen
2023-03-29 15:33   ` Walker Chen
2023-03-29 15:33   ` Walker Chen
2023-03-30  7:39   ` Krzysztof Kozlowski
2023-03-30  7:39     ` Krzysztof Kozlowski
2023-04-03 12:17     ` Walker Chen
2023-04-03 12:17       ` Walker Chen
2023-04-03 12:17       ` Walker Chen
2023-03-29 15:33 ` [PATCH v1 2/3] ASoC: starfive: Add JH7110 TDM driver Walker Chen
2023-03-29 15:33   ` Walker Chen
2023-03-29 15:33   ` Walker Chen
2023-03-29 15:33 ` Walker Chen [this message]
2023-03-29 15:33   ` [PATCH v1 3/3] riscv: dts: starfive: add tdm node and sound card Walker Chen
2023-03-29 15:33   ` Walker Chen
2023-03-30  7:43   ` Krzysztof Kozlowski
2023-03-30  7:43     ` Krzysztof Kozlowski
2023-03-30  7:58     ` Conor Dooley
2023-03-30  7:58       ` Conor Dooley
2023-03-30 15:16       ` Walker Chen
2023-03-30 15:16         ` Walker Chen
2023-03-30 15:16         ` Walker Chen
2023-03-30 15:31         ` Conor Dooley
2023-03-30 15:31           ` Conor Dooley
2023-03-30 15:31           ` Conor Dooley
2023-03-30  7:58     ` Conor Dooley via Alsa-devel
2023-04-03 12:58     ` Walker Chen
2023-04-03 12:58       ` Walker Chen
2023-04-03 12:58       ` Walker Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230329153320.31390-4-walker.chen@starfivetech.com \
    --to=walker.chen@starfivetech.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=conor.dooley@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.