From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Rob Herring <robh@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH] dt-bindings: remoteproc: Drop unneeded quotes
Date: Wed, 29 Mar 2023 11:21:06 -0600 [thread overview]
Message-ID: <20230329172106.GA3374270@p14s> (raw)
In-Reply-To: <20230327170114.4102315-1-robh@kernel.org>
On Mon, Mar 27, 2023 at 12:01:13PM -0500, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 4 ++--
> .../bindings/remoteproc/fsl,imx-rproc.yaml | 4 ++--
> .../bindings/remoteproc/ingenic,vpu.yaml | 4 ++--
> .../bindings/remoteproc/qcom,glink-edge.yaml | 2 +-
> .../bindings/remoteproc/qcom,smd-edge.yaml | 2 +-
> .../bindings/remoteproc/renesas,rcar-rproc.yaml | 4 ++--
> .../bindings/remoteproc/st,stm32-rproc.yaml | 14 +++++++-------
> 7 files changed, 17 insertions(+), 17 deletions(-)
>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 11cb42a3fdd1..3100cb870170 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Amlogic Meson AO ARC Remote Processor
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> index ae2eab4452dd..0c3910f152d1 100644
> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: NXP i.MX Co-Processor
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> index 85b1e43cab08..8b55dbd909b0 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Ingenic Video Processing Unit
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> index 15e6851e1ff8..7b43ad3daa56 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> @@ -15,7 +15,7 @@ description:
>
> properties:
> $nodename:
> - const: "glink-edge"
> + const: glink-edge
>
> apr:
> $ref: /schemas/soc/qcom/qcom,apr.yaml#
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> index 7ec8a6b6682c..02c85b420c1a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> @@ -21,7 +21,7 @@ description:
>
> properties:
> $nodename:
> - const: "smd-edge"
> + const: smd-edge
>
> apr:
> $ref: /schemas/soc/qcom/qcom,apr.yaml#
> diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> index 7e0275d31a3c..4bea679a0f61 100644
> --- a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Renesas R-Car remote processor controller
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> index 66b1e3efdaa3..37c0d7b4ceef 100644
> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: STMicroelectronics STM32 remote processor controller
>
> @@ -29,7 +29,7 @@ properties:
>
> st,syscfg-holdboot:
> description: remote processor reset hold boot
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: Phandle of syscon block
> @@ -39,7 +39,7 @@ properties:
> st,syscfg-tz:
> description:
> Reference to the system configuration which holds the RCC trust zone mode
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: Phandle of syscon block
> @@ -95,7 +95,7 @@ properties:
> (see ../reserved-memory/reserved-memory.txt)
>
> st,syscfg-pdds:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the system configuration which holds the remote
> items:
> @@ -105,7 +105,7 @@ properties:
> - description: The field mask of the PDDS selection
>
> st,syscfg-m4-state:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the tamp register which exposes the Cortex-M4 state.
> items:
> @@ -115,7 +115,7 @@ properties:
> - description: The field mask of the Cortex-M4 state
>
> st,syscfg-rsc-tbl:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the tamp register which references the Cortex-M4
> resource table address.
> --
> 2.39.2
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Rob Herring <robh@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH] dt-bindings: remoteproc: Drop unneeded quotes
Date: Wed, 29 Mar 2023 11:21:06 -0600 [thread overview]
Message-ID: <20230329172106.GA3374270@p14s> (raw)
In-Reply-To: <20230327170114.4102315-1-robh@kernel.org>
On Mon, Mar 27, 2023 at 12:01:13PM -0500, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 4 ++--
> .../bindings/remoteproc/fsl,imx-rproc.yaml | 4 ++--
> .../bindings/remoteproc/ingenic,vpu.yaml | 4 ++--
> .../bindings/remoteproc/qcom,glink-edge.yaml | 2 +-
> .../bindings/remoteproc/qcom,smd-edge.yaml | 2 +-
> .../bindings/remoteproc/renesas,rcar-rproc.yaml | 4 ++--
> .../bindings/remoteproc/st,stm32-rproc.yaml | 14 +++++++-------
> 7 files changed, 17 insertions(+), 17 deletions(-)
>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 11cb42a3fdd1..3100cb870170 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Amlogic Meson AO ARC Remote Processor
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> index ae2eab4452dd..0c3910f152d1 100644
> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: NXP i.MX Co-Processor
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> index 85b1e43cab08..8b55dbd909b0 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Ingenic Video Processing Unit
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> index 15e6851e1ff8..7b43ad3daa56 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> @@ -15,7 +15,7 @@ description:
>
> properties:
> $nodename:
> - const: "glink-edge"
> + const: glink-edge
>
> apr:
> $ref: /schemas/soc/qcom/qcom,apr.yaml#
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> index 7ec8a6b6682c..02c85b420c1a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> @@ -21,7 +21,7 @@ description:
>
> properties:
> $nodename:
> - const: "smd-edge"
> + const: smd-edge
>
> apr:
> $ref: /schemas/soc/qcom/qcom,apr.yaml#
> diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> index 7e0275d31a3c..4bea679a0f61 100644
> --- a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Renesas R-Car remote processor controller
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> index 66b1e3efdaa3..37c0d7b4ceef 100644
> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: STMicroelectronics STM32 remote processor controller
>
> @@ -29,7 +29,7 @@ properties:
>
> st,syscfg-holdboot:
> description: remote processor reset hold boot
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: Phandle of syscon block
> @@ -39,7 +39,7 @@ properties:
> st,syscfg-tz:
> description:
> Reference to the system configuration which holds the RCC trust zone mode
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: Phandle of syscon block
> @@ -95,7 +95,7 @@ properties:
> (see ../reserved-memory/reserved-memory.txt)
>
> st,syscfg-pdds:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the system configuration which holds the remote
> items:
> @@ -105,7 +105,7 @@ properties:
> - description: The field mask of the PDDS selection
>
> st,syscfg-m4-state:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the tamp register which exposes the Cortex-M4 state.
> items:
> @@ -115,7 +115,7 @@ properties:
> - description: The field mask of the Cortex-M4 state
>
> st,syscfg-rsc-tbl:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the tamp register which references the Cortex-M4
> resource table address.
> --
> 2.39.2
>
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Rob Herring <robh@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH] dt-bindings: remoteproc: Drop unneeded quotes
Date: Wed, 29 Mar 2023 11:21:06 -0600 [thread overview]
Message-ID: <20230329172106.GA3374270@p14s> (raw)
In-Reply-To: <20230327170114.4102315-1-robh@kernel.org>
On Mon, Mar 27, 2023 at 12:01:13PM -0500, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 4 ++--
> .../bindings/remoteproc/fsl,imx-rproc.yaml | 4 ++--
> .../bindings/remoteproc/ingenic,vpu.yaml | 4 ++--
> .../bindings/remoteproc/qcom,glink-edge.yaml | 2 +-
> .../bindings/remoteproc/qcom,smd-edge.yaml | 2 +-
> .../bindings/remoteproc/renesas,rcar-rproc.yaml | 4 ++--
> .../bindings/remoteproc/st,stm32-rproc.yaml | 14 +++++++-------
> 7 files changed, 17 insertions(+), 17 deletions(-)
>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 11cb42a3fdd1..3100cb870170 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Amlogic Meson AO ARC Remote Processor
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> index ae2eab4452dd..0c3910f152d1 100644
> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: NXP i.MX Co-Processor
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> index 85b1e43cab08..8b55dbd909b0 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Ingenic Video Processing Unit
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> index 15e6851e1ff8..7b43ad3daa56 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> @@ -15,7 +15,7 @@ description:
>
> properties:
> $nodename:
> - const: "glink-edge"
> + const: glink-edge
>
> apr:
> $ref: /schemas/soc/qcom/qcom,apr.yaml#
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> index 7ec8a6b6682c..02c85b420c1a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> @@ -21,7 +21,7 @@ description:
>
> properties:
> $nodename:
> - const: "smd-edge"
> + const: smd-edge
>
> apr:
> $ref: /schemas/soc/qcom/qcom,apr.yaml#
> diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> index 7e0275d31a3c..4bea679a0f61 100644
> --- a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Renesas R-Car remote processor controller
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> index 66b1e3efdaa3..37c0d7b4ceef 100644
> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: STMicroelectronics STM32 remote processor controller
>
> @@ -29,7 +29,7 @@ properties:
>
> st,syscfg-holdboot:
> description: remote processor reset hold boot
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: Phandle of syscon block
> @@ -39,7 +39,7 @@ properties:
> st,syscfg-tz:
> description:
> Reference to the system configuration which holds the RCC trust zone mode
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: Phandle of syscon block
> @@ -95,7 +95,7 @@ properties:
> (see ../reserved-memory/reserved-memory.txt)
>
> st,syscfg-pdds:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the system configuration which holds the remote
> items:
> @@ -105,7 +105,7 @@ properties:
> - description: The field mask of the PDDS selection
>
> st,syscfg-m4-state:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the tamp register which exposes the Cortex-M4 state.
> items:
> @@ -115,7 +115,7 @@ properties:
> - description: The field mask of the Cortex-M4 state
>
> st,syscfg-rsc-tbl:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> Reference to the tamp register which references the Cortex-M4
> resource table address.
> --
> 2.39.2
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-29 17:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-27 17:01 [PATCH] dt-bindings: remoteproc: Drop unneeded quotes Rob Herring
2023-03-27 17:01 ` Rob Herring
2023-03-27 17:01 ` Rob Herring
2023-03-28 6:44 ` Krzysztof Kozlowski
2023-03-28 6:44 ` Krzysztof Kozlowski
2023-03-28 6:44 ` Krzysztof Kozlowski
2023-03-29 17:21 ` Mathieu Poirier [this message]
2023-03-29 17:21 ` Mathieu Poirier
2023-03-29 17:21 ` Mathieu Poirier
2023-04-18 16:09 ` Bjorn Andersson
2023-04-18 16:09 ` Bjorn Andersson
2023-04-18 16:09 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230329172106.GA3374270@p14s \
--to=mathieu.poirier@linaro.org \
--cc=agross@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=jbrunet@baylibre.com \
--cc=kernel@pengutronix.de \
--cc=khilman@baylibre.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.