All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Shannon Nelson <shannon.nelson@amd.com>
Cc: brett.creeley@amd.com, davem@davemloft.net,
	netdev@vger.kernel.org, kuba@kernel.org, drivers@pensando.io,
	jiri@resnulli.us
Subject: Re: [PATCH v9 net-next 03/14] pds_core: health timer and workqueue
Date: Sun, 9 Apr 2023 14:51:10 +0300	[thread overview]
Message-ID: <20230409115110.GB182481@unreal> (raw)
In-Reply-To: <20230406234143.11318-4-shannon.nelson@amd.com>

On Thu, Apr 06, 2023 at 04:41:32PM -0700, Shannon Nelson wrote:
> Add in the periodic health check and the related workqueue,
> as well as the handlers for when a FW reset is seen.
> 
> The firmware is polled every 5 seconds to be sure that it is
> still alive and that the FW generation didn't change.
> 
> The alive check looks to see that the PCI bus is still readable
> and the fw_status still has the RUNNING bit on.  If not alive,
> the driver stops activity and tears things down.  When the FW
> recovers and the alive check again succeeds, the driver sets
> back up for activity.
> 
> The generation check looks at the fw_generation to see if it
> has changed, which can happen if the FW crashed and recovered
> or was updated in between health checks.  If changed, the
> driver counts that as though the alive test failed and forces
> the fw_down/fw_up cycle.
> 
> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
> ---
>  drivers/net/ethernet/amd/pds_core/core.c | 61 ++++++++++++++++++++++++
>  drivers/net/ethernet/amd/pds_core/core.h |  8 ++++
>  drivers/net/ethernet/amd/pds_core/dev.c  |  3 ++
>  drivers/net/ethernet/amd/pds_core/main.c | 37 ++++++++++++++
>  4 files changed, 109 insertions(+)

<...>

>  
>  err_out_unmap_bars:
>  	mutex_unlock(&pdsc->config_lock);
> +	del_timer_sync(&pdsc->wdtimer);
> +	if (pdsc->wq) {
> +		flush_workqueue(pdsc->wq);
> +		destroy_workqueue(pdsc->wq);

There is no need to call to flush_workqueue() as destroy_workqueue()
will do it.

> +		pdsc->wq = NULL;
> +	}
>  	mutex_destroy(&pdsc->config_lock);
>  	mutex_destroy(&pdsc->devcmd_lock);
>  	pci_free_irq_vectors(pdsc->pdev);
> @@ -270,6 +300,13 @@ static void pdsc_remove(struct pci_dev *pdev)
>  	devl_unlock(dl);
>  
>  	if (!pdev->is_virtfn) {
> +		del_timer_sync(&pdsc->wdtimer);
> +		if (pdsc->wq) {
> +			flush_workqueue(pdsc->wq);
> +			destroy_workqueue(pdsc->wq);

Same

> +			pdsc->wq = NULL;

Not really needed, pdsc is released.

> +		}
> +
>  		mutex_lock(&pdsc->config_lock);
>  		set_bit(PDSC_S_STOPPING_DRIVER, &pdsc->state);
>  
> -- 
> 2.17.1
> 

  reply	other threads:[~2023-04-09 11:51 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-06 23:41 [PATCH v9 net-next 00/14] pds_core driver Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 01/14] pds_core: initial framework for pds_core PF driver Shannon Nelson
2023-04-09 11:26   ` Leon Romanovsky
2023-04-10 18:41     ` Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 02/14] pds_core: add devcmd device interfaces Shannon Nelson
2023-04-09 11:46   ` Leon Romanovsky
2023-04-10 19:05     ` Shannon Nelson
2023-04-13  8:33       ` Leon Romanovsky
2023-04-13 15:08         ` Jakub Kicinski
2023-04-14  0:00         ` Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 03/14] pds_core: health timer and workqueue Shannon Nelson
2023-04-09 11:51   ` Leon Romanovsky [this message]
2023-04-10 19:12     ` Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 04/14] pds_core: add devlink health facilities Shannon Nelson
2023-04-09 11:54   ` Leon Romanovsky
2023-04-10 19:18     ` Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 05/14] pds_core: set up device and adminq Shannon Nelson
2023-04-09 12:03   ` Leon Romanovsky
2023-04-10 19:27     ` Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 06/14] pds_core: Add adminq processing and commands Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 07/14] pds_core: add FW update feature to devlink Shannon Nelson
2023-04-10 15:44   ` Simon Horman
2023-04-10 22:59     ` Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 08/14] pds_core: set up the VIF definitions and defaults Shannon Nelson
2023-04-09 12:08   ` Leon Romanovsky
2023-04-10 19:36     ` Shannon Nelson
2023-04-13  8:36       ` Leon Romanovsky
2023-04-06 23:41 ` [PATCH v9 net-next 09/14] pds_core: add initial VF device handling Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 10/14] pds_core: add auxiliary_bus devices Shannon Nelson
2023-04-09 12:23   ` Leon Romanovsky
2023-04-10 20:02     ` Shannon Nelson
2023-04-13  8:43       ` Leon Romanovsky
2023-04-06 23:41 ` [PATCH v9 net-next 11/14] pds_core: devlink params for enabling VIF support Shannon Nelson
2023-04-06 23:41 ` [PATCH v9 net-next 12/14] pds_core: add the aux client API Shannon Nelson
2023-04-09 17:07   ` Leon Romanovsky
2023-04-10 20:50     ` Shannon Nelson
2023-04-13  8:45       ` Leon Romanovsky
2023-04-06 23:41 ` [PATCH v9 net-next 13/14] pds_core: publish events to the clients Shannon Nelson
2023-04-09 17:11   ` Leon Romanovsky
2023-04-10 21:01     ` Shannon Nelson
2023-04-13  8:55       ` Leon Romanovsky
2023-04-13 15:14         ` Jakub Kicinski
2023-04-13 16:44           ` Leon Romanovsky
2023-04-13 16:55             ` Jakub Kicinski
2023-04-13 17:07               ` Leon Romanovsky
2023-04-13 17:10                 ` Jakub Kicinski
2023-04-13 23:42                   ` Shannon Nelson
2023-04-14  8:51                     ` Leon Romanovsky
2023-04-06 23:41 ` [PATCH v9 net-next 14/14] pds_core: Kconfig and pds_core.rst Shannon Nelson
2023-04-09 17:17   ` Leon Romanovsky
2023-04-10 21:05     ` Shannon Nelson
2023-04-08  3:18 ` [PATCH v9 net-next 00/14] pds_core driver Jakub Kicinski
2023-04-10 20:00 ` Alex Williamson
2023-04-10 21:05   ` Shannon Nelson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230409115110.GB182481@unreal \
    --to=leon@kernel.org \
    --cc=brett.creeley@amd.com \
    --cc=davem@davemloft.net \
    --cc=drivers@pensando.io \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=shannon.nelson@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.