All of lore.kernel.org
 help / color / mirror / Atom feed
From: Walker Chen <walker.chen@starfivetech.com>
To: Conor Dooley <conor.dooley@microchip.com>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	"Hal Feng" <hal.feng@starfivetech.com>
Cc: <linux-riscv@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	Walker Chen <walker.chen@starfivetech.com>
Subject: [PATCH v1] riscv: dts: starfive: Add PMU controller node
Date: Mon, 17 Apr 2023 11:47:28 +0800	[thread overview]
Message-ID: <20230417034728.2670-1-walker.chen@starfivetech.com> (raw)

Add the pmu controller node for the StarFive JH7110 SoC. The PMU needs
to be used by other modules, e.g. VPU,ISP,etc.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
This patch is based on:
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/commit/?h=riscv-dt-for-v6.4&id=60bf0a39842eb042bbdc4539285c7e524011fc2d
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..30e1f34d5cf8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -496,5 +496,12 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		pwrc: power-controller@17030000 {
+			compatible = "starfive,jh7110-pmu";
+			reg = <0x0 0x17030000 0x0 0x10000>;
+			interrupts = <111>;
+			#power-domain-cells = <1>;
+		};
 	};
 };
-- 
2.17.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Walker Chen <walker.chen@starfivetech.com>
To: Conor Dooley <conor.dooley@microchip.com>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	"Hal Feng" <hal.feng@starfivetech.com>
Cc: <linux-riscv@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	Walker Chen <walker.chen@starfivetech.com>
Subject: [PATCH v1] riscv: dts: starfive: Add PMU controller node
Date: Mon, 17 Apr 2023 11:47:28 +0800	[thread overview]
Message-ID: <20230417034728.2670-1-walker.chen@starfivetech.com> (raw)

Add the pmu controller node for the StarFive JH7110 SoC. The PMU needs
to be used by other modules, e.g. VPU,ISP,etc.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
This patch is based on:
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/commit/?h=riscv-dt-for-v6.4&id=60bf0a39842eb042bbdc4539285c7e524011fc2d
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..30e1f34d5cf8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -496,5 +496,12 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		pwrc: power-controller@17030000 {
+			compatible = "starfive,jh7110-pmu";
+			reg = <0x0 0x17030000 0x0 0x10000>;
+			interrupts = <111>;
+			#power-domain-cells = <1>;
+		};
 	};
 };
-- 
2.17.1


             reply	other threads:[~2023-04-17  3:48 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-17  3:47 Walker Chen [this message]
2023-04-17  3:47 ` [PATCH v1] riscv: dts: starfive: Add PMU controller node Walker Chen
2023-05-07 22:02 ` Conor Dooley
2023-05-07 22:02   ` Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230417034728.2670-1-walker.chen@starfivetech.com \
    --to=walker.chen@starfivetech.com \
    --cc=conor.dooley@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=hal.feng@starfivetech.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.