All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alain Volmat <avolmat@me.com>,
	Patrice Chotard <patrice.chotard@foss.st.com>,
	Vinod Koul <vkoul@kernel.org>, Sasha Levin <sashal@kernel.org>,
	kishon@kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-phy@lists.infradead.org
Subject: [PATCH AUTOSEL 5.10 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits
Date: Wed, 10 May 2023 16:50:13 -0400	[thread overview]
Message-ID: <20230510205014.105043-1-sashal@kernel.org> (raw)

From: Alain Volmat <avolmat@me.com>

[ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ]

This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/st/phy-miphy28lp.c | 42 ++++++++--------------------------
 1 file changed, 10 insertions(+), 32 deletions(-)

diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 068160a34f5cc..e30305b77f0d1 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -9,6 +9,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy)
 
 static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy)
 {
-	unsigned long finish = jiffies + 5 * HZ;
 	u8 val;
 
 	/* Waiting for Compensation to complete */
-	do {
-		val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6);
-
-		if (time_after_eq(jiffies, finish))
-			return -EBUSY;
-		cpu_relax();
-	} while (!(val & COMP_DONE));
-
-	return 0;
+	return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6,
+					  val, val & COMP_DONE, 1, 5 * USEC_PER_SEC);
 }
 
 
@@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy)
 
 static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
 {
-	unsigned long finish = jiffies + 5 * HZ;
 	u8 mask = HFC_PLL | HFC_RDY;
 	u8 val;
 
@@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
 	if (miphy_phy->type == PHY_TYPE_SATA)
 		mask |= PHY_RDY;
 
-	do {
-		val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1);
-		if ((val & mask) != mask)
-			cpu_relax();
-		else
-			return 0;
-	} while (!time_after_eq(jiffies, finish));
-
-	return -EBUSY;
+	return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1,
+					  val, (val & mask) == mask, 1,
+					  5 * USEC_PER_SEC);
 }
 
 static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
 {
 	struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
-	unsigned long finish = jiffies + 5 * HZ;
 	u32 val;
 
 	if (!miphy_phy->osc_rdy)
@@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
 	if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
 		return -EINVAL;
 
-	do {
-		regmap_read(miphy_dev->regmap,
-				miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
-
-		if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
-			cpu_relax();
-		else
-			return 0;
-	} while (!time_after_eq(jiffies, finish));
-
-	return -EBUSY;
+	return regmap_read_poll_timeout(miphy_dev->regmap,
+					miphy_phy->syscfg_reg[SYSCFG_STATUS],
+					val, val & MIPHY_OSC_RDY, 1,
+					5 * USEC_PER_SEC);
 }
 
 static int miphy28lp_get_resource_byname(struct device_node *child,
-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alain Volmat <avolmat@me.com>,
	Patrice Chotard <patrice.chotard@foss.st.com>,
	Vinod Koul <vkoul@kernel.org>, Sasha Levin <sashal@kernel.org>,
	kishon@kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-phy@lists.infradead.org
Subject: [PATCH AUTOSEL 5.10 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits
Date: Wed, 10 May 2023 16:50:13 -0400	[thread overview]
Message-ID: <20230510205014.105043-1-sashal@kernel.org> (raw)

From: Alain Volmat <avolmat@me.com>

[ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ]

This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/st/phy-miphy28lp.c | 42 ++++++++--------------------------
 1 file changed, 10 insertions(+), 32 deletions(-)

diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 068160a34f5cc..e30305b77f0d1 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -9,6 +9,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy)
 
 static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy)
 {
-	unsigned long finish = jiffies + 5 * HZ;
 	u8 val;
 
 	/* Waiting for Compensation to complete */
-	do {
-		val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6);
-
-		if (time_after_eq(jiffies, finish))
-			return -EBUSY;
-		cpu_relax();
-	} while (!(val & COMP_DONE));
-
-	return 0;
+	return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6,
+					  val, val & COMP_DONE, 1, 5 * USEC_PER_SEC);
 }
 
 
@@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy)
 
 static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
 {
-	unsigned long finish = jiffies + 5 * HZ;
 	u8 mask = HFC_PLL | HFC_RDY;
 	u8 val;
 
@@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
 	if (miphy_phy->type == PHY_TYPE_SATA)
 		mask |= PHY_RDY;
 
-	do {
-		val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1);
-		if ((val & mask) != mask)
-			cpu_relax();
-		else
-			return 0;
-	} while (!time_after_eq(jiffies, finish));
-
-	return -EBUSY;
+	return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1,
+					  val, (val & mask) == mask, 1,
+					  5 * USEC_PER_SEC);
 }
 
 static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
 {
 	struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
-	unsigned long finish = jiffies + 5 * HZ;
 	u32 val;
 
 	if (!miphy_phy->osc_rdy)
@@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
 	if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
 		return -EINVAL;
 
-	do {
-		regmap_read(miphy_dev->regmap,
-				miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
-
-		if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
-			cpu_relax();
-		else
-			return 0;
-	} while (!time_after_eq(jiffies, finish));
-
-	return -EBUSY;
+	return regmap_read_poll_timeout(miphy_dev->regmap,
+					miphy_phy->syscfg_reg[SYSCFG_STATUS],
+					val, val & MIPHY_OSC_RDY, 1,
+					5 * USEC_PER_SEC);
 }
 
 static int miphy28lp_get_resource_byname(struct device_node *child,
-- 
2.39.2


             reply	other threads:[~2023-05-10 20:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-10 20:50 Sasha Levin [this message]
2023-05-10 20:50 ` [PATCH AUTOSEL 5.10 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits Sasha Levin
2023-05-10 20:50 ` [PATCH AUTOSEL 5.10 2/2] mfd: dln2: Fix memory leak in dln2_probe() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230510205014.105043-1-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=avolmat@me.com \
    --cc=kishon@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=patrice.chotard@foss.st.com \
    --cc=stable@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.