[PATCH 0/2] Add i.MX8MM-EVKB Support

[PATCH 0/2] Add i.MX8MM-EVKB Support

[Marco Felsch]

Hi,

I picked the patch series from Johannes [1] and reworked it according
the comments and the discussion.

@Krzysztof
I dropped your ack for the bindings since I adapted the comment within
this oneliner. Please can you check the current state and provide your
(n)ack again?

[1] https://lore.kernel.org/all/20230130172553.2738182-1-johannes.schneider@leica-geosystems.com/

---
Johannes Schneider (2):
      dt-bindings: arm: fsl: Add i.MX8MM-EVKB
      arm64: dts: add NXP i.MX8MM-EVKB support

 Documentation/devicetree/bindings/arm/fsl.yaml |   1 +
 arch/arm64/boot/dts/freescale/Makefile         |   1 +
 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts  | 128 +++++++++++++++++++++++++
 3 files changed, 130 insertions(+)
---
base-commit: 457391b0380335d5e9a5babdec90ac53928b23b4
change-id: 20230503-b4-v6-3-topic-boards-imx8mm-evk-94e79a9062ab

Best regards,
-- 
Marco Felsch <m.felsch@pengutronix.de>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 0/2] Add i.MX8MM-EVKB Support

[Marco Felsch]

Hi,

I picked the patch series from Johannes [1] and reworked it according
the comments and the discussion.

@Krzysztof
I dropped your ack for the bindings since I adapted the comment within
this oneliner. Please can you check the current state and provide your
(n)ack again?

[1] https://lore.kernel.org/all/20230130172553.2738182-1-johannes.schneider@leica-geosystems.com/

---
Johannes Schneider (2):
      dt-bindings: arm: fsl: Add i.MX8MM-EVKB
      arm64: dts: add NXP i.MX8MM-EVKB support

 Documentation/devicetree/bindings/arm/fsl.yaml |   1 +
 arch/arm64/boot/dts/freescale/Makefile         |   1 +
 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts  | 128 +++++++++++++++++++++++++
 3 files changed, 130 insertions(+)
---
base-commit: 457391b0380335d5e9a5babdec90ac53928b23b4
change-id: 20230503-b4-v6-3-topic-boards-imx8mm-evk-94e79a9062ab

Best regards,
-- 
Marco Felsch <m.felsch@pengutronix.de>

[PATCH 1/2] dt-bindings: arm: fsl: Add i.MX8MM-EVKB

[Marco Felsch]

From: Johannes Schneider <johannes.schneider@leica-geosystems.com>

Add DT compatible for the imx8mm EVKB [1].

[1] https://www.nxp.com/design/development-boards/ \
	i-mx-evaluation-and-development-boards/ \
	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
[m.felsch@pengutronix.de: Adapt the commit message]
[m.felsch@pengutronix.de: Adapt the yaml comment]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 442ce8f4d675..446f71b7b798 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -887,6 +887,7 @@ properties:
               - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - fsl,imx8mm-evkb           # i.MX8MM EVKB Board
               - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit

-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] dt-bindings: arm: fsl: Add i.MX8MM-EVKB

[Marco Felsch]

From: Johannes Schneider <johannes.schneider@leica-geosystems.com>

Add DT compatible for the imx8mm EVKB [1].

[1] https://www.nxp.com/design/development-boards/ \
	i-mx-evaluation-and-development-boards/ \
	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
[m.felsch@pengutronix.de: Adapt the commit message]
[m.felsch@pengutronix.de: Adapt the yaml comment]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 442ce8f4d675..446f71b7b798 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -887,6 +887,7 @@ properties:
               - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - fsl,imx8mm-evkb           # i.MX8MM EVKB Board
               - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit

-- 
2.39.2

[PATCH 2/2] arm64: dts: add NXP i.MX8MM-EVKB support

[Marco Felsch]

From: Johannes Schneider <johannes.schneider@leica-geosystems.com>

Add the i.MX8MM-EVKB [1] devicetree support. The EVKB is basically the
same device except for the different used PMIC.

[1] https://www.nxp.com/design/development-boards/ \
        i-mx-evaluation-and-development-boards/ \
	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
[m.felsch@pengutronix.de: Adapt the commit message]
[m.felsch@pengutronix.de: Include Shawns feedback]
[m.felsch@pengutronix.de: Fix the regulator settings]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 128 ++++++++++++++++++++++++++
 2 files changed, 129 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 198fff3731ae..a054313761a4 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
new file mode 100644
index 000000000000..164df627a213
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVKB";
+	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
+};
+
+&i2c1 {
+	/delete-node/ pmic@4b;
+
+	pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* VDD_SOC with PCIe */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			/* VDD_GPU, VDD_VPU, VDD_DRAM */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_3V3 */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1V8, NVCC_1V8, NVCC_ENET */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_DRAM for LPDDR4 */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SNVS_1P8 */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_SNVS_0P8 */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_*_1V8 */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_0V9 */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SD2 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};

-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/2] arm64: dts: add NXP i.MX8MM-EVKB support

[Marco Felsch]

From: Johannes Schneider <johannes.schneider@leica-geosystems.com>

Add the i.MX8MM-EVKB [1] devicetree support. The EVKB is basically the
same device except for the different used PMIC.

[1] https://www.nxp.com/design/development-boards/ \
        i-mx-evaluation-and-development-boards/ \
	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
[m.felsch@pengutronix.de: Adapt the commit message]
[m.felsch@pengutronix.de: Include Shawns feedback]
[m.felsch@pengutronix.de: Fix the regulator settings]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 128 ++++++++++++++++++++++++++
 2 files changed, 129 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 198fff3731ae..a054313761a4 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
new file mode 100644
index 000000000000..164df627a213
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVKB";
+	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
+};
+
+&i2c1 {
+	/delete-node/ pmic@4b;
+
+	pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* VDD_SOC with PCIe */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			/* VDD_GPU, VDD_VPU, VDD_DRAM */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_3V3 */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1V8, NVCC_1V8, NVCC_ENET */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_DRAM for LPDDR4 */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SNVS_1P8 */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_SNVS_0P8 */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_*_1V8 */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_0V9 */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SD2 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};

-- 
2.39.2

Re: [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX8MM-EVKB

[Krzysztof Kozlowski]

On 03/05/2023 17:20, Marco Felsch wrote:
> From: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> 
> Add DT compatible for the imx8mm EVKB [1].
> 
> [1] https://www.nxp.com/design/development-boards/ \
> 	i-mx-evaluation-and-development-boards/ \
> 	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK
> 
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> [m.felsch@pengutronix.de: Adapt the commit message]
> [m.felsch@pengutronix.de: Adapt the yaml comment]

I don't see any differences. The comment is exactly the same as before.

This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions. However, there's no need to repost patches *only* to add the
tags. The upstream maintainer will do that for acks received on the
version they apply.

https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540

If a tag was not added on purpose, please state why and what changed.


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX8MM-EVKB

[Krzysztof Kozlowski]

On 03/05/2023 17:20, Marco Felsch wrote:
> From: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> 
> Add DT compatible for the imx8mm EVKB [1].
> 
> [1] https://www.nxp.com/design/development-boards/ \
> 	i-mx-evaluation-and-development-boards/ \
> 	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK
> 
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> [m.felsch@pengutronix.de: Adapt the commit message]
> [m.felsch@pengutronix.de: Adapt the yaml comment]

I don't see any differences. The comment is exactly the same as before.

This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions. However, there's no need to repost patches *only* to add the
tags. The upstream maintainer will do that for acks received on the
version they apply.

https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540

If a tag was not added on purpose, please state why and what changed.


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX8MM-EVKB

[Marco Felsch]

On 23-05-03, Krzysztof Kozlowski wrote:
> On 03/05/2023 17:20, Marco Felsch wrote:
> > From: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> > 
> > Add DT compatible for the imx8mm EVKB [1].
> > 
> > [1] https://www.nxp.com/design/development-boards/ \
> > 	i-mx-evaluation-and-development-boards/ \
> > 	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK
> > 
> > Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> > [m.felsch@pengutronix.de: Adapt the commit message]
> > [m.felsch@pengutronix.de: Adapt the yaml comment]
> 
> I don't see any differences. The comment is exactly the same as before.

I fogot to say that I used V8 as base which caused problems on Shawns
side and there was a difference.

> This is a friendly reminder during the review process.
> 
> It looks like you received a tag and forgot to add it.
> 
> If you do not know the process, here is a short explanation:
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions. However, there's no need to repost patches *only* to add the
> tags. The upstream maintainer will do that for acks received on the
> version they apply.
> 
> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
> 
> If a tag was not added on purpose, please state why and what changed.

As said above..

Regards,
  Marco

> 
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Best regards,
> Krzysztof
> 
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX8MM-EVKB

[Marco Felsch]

On 23-05-03, Krzysztof Kozlowski wrote:
> On 03/05/2023 17:20, Marco Felsch wrote:
> > From: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> > 
> > Add DT compatible for the imx8mm EVKB [1].
> > 
> > [1] https://www.nxp.com/design/development-boards/ \
> > 	i-mx-evaluation-and-development-boards/ \
> > 	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK
> > 
> > Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> > [m.felsch@pengutronix.de: Adapt the commit message]
> > [m.felsch@pengutronix.de: Adapt the yaml comment]
> 
> I don't see any differences. The comment is exactly the same as before.

I fogot to say that I used V8 as base which caused problems on Shawns
side and there was a difference.

> This is a friendly reminder during the review process.
> 
> It looks like you received a tag and forgot to add it.
> 
> If you do not know the process, here is a short explanation:
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions. However, there's no need to repost patches *only* to add the
> tags. The upstream maintainer will do that for acks received on the
> version they apply.
> 
> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
> 
> If a tag was not added on purpose, please state why and what changed.

As said above..

Regards,
  Marco

> 
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Best regards,
> Krzysztof
> 
> 
> 

Re: [PATCH 0/2] Add i.MX8MM-EVKB Support

[Shawn Guo]

On Wed, May 03, 2023 at 05:20:03PM +0200, Marco Felsch wrote:
> Hi,
> 
> I picked the patch series from Johannes [1] and reworked it according
> the comments and the discussion.
> 
> @Krzysztof
> I dropped your ack for the bindings since I adapted the comment within
> this oneliner. Please can you check the current state and provide your
> (n)ack again?
> 
> [1] https://lore.kernel.org/all/20230130172553.2738182-1-johannes.schneider@leica-geosystems.com/
> 
> ---
> Johannes Schneider (2):
>       dt-bindings: arm: fsl: Add i.MX8MM-EVKB
>       arm64: dts: add NXP i.MX8MM-EVKB support

Applied both, thanks!