All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: marex@denx.de, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, conor+dt@kernel.org,
	Fabio Estevam <festevam@denx.de>
Subject: [PATCH v7 2/2] ARM: dts: imx6sx: Add LDB support
Date: Tue, 23 May 2023 20:52:32 -0300	[thread overview]
Message-ID: <20230523235232.7358-2-festevam@gmail.com> (raw)
In-Reply-To: <20230523235232.7358-1-festevam@gmail.com>

From: Fabio Estevam <festevam@denx.de>

i.MX6SX has an LVDS controller that is connected to the eLCDIF.

Add support for it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Dependency: This depends on bd60d98a11da ("dt-bindings: display: bridge: ldb: Adjust imx6sx entries"),
which is available on linux-next.

Changes since v6:
- Use simple-mfd.

 arch/arm/boot/dts/imx6sx.dtsi | 42 +++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 4233943a1cca..3a4308666552 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -841,10 +841,40 @@ iomuxc: pinctrl@20e0000 {
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@20e4000 {
+			gpr: syscon@20e4000 {
 				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
+					     "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x020e4000 0x4000>;
+
+				lvds_bridge: bridge@18 {
+					compatible = "fsl,imx6sx-ldb";
+					reg = <0x18 0x4>;
+					clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+					clock-names = "ldb";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif1: endpoint {
+								remote-endpoint = <&lcdif1_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+					};
+				};
 			};
 
 			sdma: dma-controller@20ec000 {
@@ -1278,6 +1308,14 @@ lcdif1: lcdif@2220000 {
 					clock-names = "pix", "axi", "disp_axi";
 					power-domains = <&pd_disp>;
 					status = "disabled";
+
+					ports {
+						port {
+							lcdif1_to_ldb: endpoint {
+								remote-endpoint = <&ldb_from_lcdif1>;
+							};
+						};
+					};
 				};
 
 				lcdif2: lcdif@2224000 {
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: marex@denx.de, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, conor+dt@kernel.org,
	Fabio Estevam <festevam@denx.de>
Subject: [PATCH v7 2/2] ARM: dts: imx6sx: Add LDB support
Date: Tue, 23 May 2023 20:52:32 -0300	[thread overview]
Message-ID: <20230523235232.7358-2-festevam@gmail.com> (raw)
In-Reply-To: <20230523235232.7358-1-festevam@gmail.com>

From: Fabio Estevam <festevam@denx.de>

i.MX6SX has an LVDS controller that is connected to the eLCDIF.

Add support for it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Dependency: This depends on bd60d98a11da ("dt-bindings: display: bridge: ldb: Adjust imx6sx entries"),
which is available on linux-next.

Changes since v6:
- Use simple-mfd.

 arch/arm/boot/dts/imx6sx.dtsi | 42 +++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 4233943a1cca..3a4308666552 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -841,10 +841,40 @@ iomuxc: pinctrl@20e0000 {
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@20e4000 {
+			gpr: syscon@20e4000 {
 				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
+					     "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x020e4000 0x4000>;
+
+				lvds_bridge: bridge@18 {
+					compatible = "fsl,imx6sx-ldb";
+					reg = <0x18 0x4>;
+					clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+					clock-names = "ldb";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif1: endpoint {
+								remote-endpoint = <&lcdif1_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+					};
+				};
 			};
 
 			sdma: dma-controller@20ec000 {
@@ -1278,6 +1308,14 @@ lcdif1: lcdif@2220000 {
 					clock-names = "pix", "axi", "disp_axi";
 					power-domains = <&pd_disp>;
 					status = "disabled";
+
+					ports {
+						port {
+							lcdif1_to_ldb: endpoint {
+								remote-endpoint = <&ldb_from_lcdif1>;
+							};
+						};
+					};
 				};
 
 				lcdif2: lcdif@2224000 {
-- 
2.34.1


  reply	other threads:[~2023-05-23 23:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-23 23:52 [PATCH v7 1/2] dt-bindings: display: bridge: ldb: Adjust imx6sx entries Fabio Estevam
2023-05-23 23:52 ` Fabio Estevam
2023-05-23 23:52 ` Fabio Estevam [this message]
2023-05-23 23:52   ` [PATCH v7 2/2] ARM: dts: imx6sx: Add LDB support Fabio Estevam
2023-05-27 12:55   ` Shawn Guo
2023-05-27 12:55     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230523235232.7358-2-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@denx.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marex@denx.de \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.