From: Frank Oltmanns <frank@oltmanns.dev>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: Frank Oltmanns <frank@oltmanns.dev>,
Abel Vesa <abelvesa@kernel.org>, Peng Fan <peng.fan@nxp.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>, Jacky Bai <ping.bai@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] clk: fractional-divider: Improve approximation when zero based
Date: Mon, 29 May 2023 15:34:33 +0200 [thread overview]
Message-ID: <20230529133433.56215-1-frank@oltmanns.dev> (raw)
Consider the CLK_FRAC_DIVIDER_ZERO_BASED flag when finding the best
approximation for m and n. By doing so, increase the range of valid
values for the numerator and denominator by 1.
Cc: A.s. Dong <aisheng.dong@nxp.com
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
---
I stumpled upon this, when familiarizing myself with clk drivers. Unfortunately,
I have no boards to test this patch. It seems the only user of this flag in
mainline is drivers/clk/imx/clk-composite-7ulp.c, therefore I'm cc-ing
get_maintainers.pl --git-blame -f drivers/clk/imx/clk-composite-7ulp.c
in the hopes of a wider audience.
Thank you for considering this contribution,
Frank
drivers/clk/clk-fractional-divider.c | 26 +++++++++++++++++++-------
1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c
index 479297763e70..7da21cd2bdb1 100644
--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -123,6 +123,7 @@ void clk_fractional_divider_general_approximation(struct clk_hw *hw,
unsigned long *m, unsigned long *n)
{
struct clk_fractional_divider *fd = to_clk_fd(hw);
+ unsigned long max_m, max_n;
/*
* Get rate closer to *parent_rate to guarantee there is no overflow
@@ -138,9 +139,15 @@ void clk_fractional_divider_general_approximation(struct clk_hw *hw,
rate <<= scale - fd->nwidth;
}
- rational_best_approximation(rate, *parent_rate,
- GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
- m, n);
+ if (fd->flags & CLK_FRAC_DIVIDER_ZERO_BASED) {
+ max_m = 1 << fd->mwidth;
+ max_n = 1 << fd->nwidth;
+ } else {
+ max_m = GENMASK(fd->mwidth - 1, 0);
+ max_n = GENMASK(fd->nwidth - 1, 0);
+ }
+
+ rational_best_approximation(rate, *parent_rate, max_m, max_n, m, n);
}
static long clk_fd_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -169,13 +176,18 @@ static int clk_fd_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct clk_fractional_divider *fd = to_clk_fd(hw);
unsigned long flags = 0;
- unsigned long m, n;
+ unsigned long m, n, max_m, max_n;
u32 mmask, nmask;
u32 val;
- rational_best_approximation(rate, parent_rate,
- GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
- &m, &n);
+ if (fd->flags & CLK_FRAC_DIVIDER_ZERO_BASED) {
+ max_m = 1 << fd->mwidth;
+ max_n = 1 << fd->nwidth;
+ } else {
+ max_m = GENMASK(fd->mwidth - 1, 0);
+ max_n = GENMASK(fd->nwidth - 1, 0);
+ }
+ rational_best_approximation(rate, parent_rate, max_m, max_n, &m, &n);
if (fd->flags & CLK_FRAC_DIVIDER_ZERO_BASED) {
m--;
--
2.40.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank Oltmanns <frank@oltmanns.dev>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: Frank Oltmanns <frank@oltmanns.dev>,
Abel Vesa <abelvesa@kernel.org>, Peng Fan <peng.fan@nxp.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>, Jacky Bai <ping.bai@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] clk: fractional-divider: Improve approximation when zero based
Date: Mon, 29 May 2023 15:34:33 +0200 [thread overview]
Message-ID: <20230529133433.56215-1-frank@oltmanns.dev> (raw)
Consider the CLK_FRAC_DIVIDER_ZERO_BASED flag when finding the best
approximation for m and n. By doing so, increase the range of valid
values for the numerator and denominator by 1.
Cc: A.s. Dong <aisheng.dong@nxp.com
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
---
I stumpled upon this, when familiarizing myself with clk drivers. Unfortunately,
I have no boards to test this patch. It seems the only user of this flag in
mainline is drivers/clk/imx/clk-composite-7ulp.c, therefore I'm cc-ing
get_maintainers.pl --git-blame -f drivers/clk/imx/clk-composite-7ulp.c
in the hopes of a wider audience.
Thank you for considering this contribution,
Frank
drivers/clk/clk-fractional-divider.c | 26 +++++++++++++++++++-------
1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c
index 479297763e70..7da21cd2bdb1 100644
--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -123,6 +123,7 @@ void clk_fractional_divider_general_approximation(struct clk_hw *hw,
unsigned long *m, unsigned long *n)
{
struct clk_fractional_divider *fd = to_clk_fd(hw);
+ unsigned long max_m, max_n;
/*
* Get rate closer to *parent_rate to guarantee there is no overflow
@@ -138,9 +139,15 @@ void clk_fractional_divider_general_approximation(struct clk_hw *hw,
rate <<= scale - fd->nwidth;
}
- rational_best_approximation(rate, *parent_rate,
- GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
- m, n);
+ if (fd->flags & CLK_FRAC_DIVIDER_ZERO_BASED) {
+ max_m = 1 << fd->mwidth;
+ max_n = 1 << fd->nwidth;
+ } else {
+ max_m = GENMASK(fd->mwidth - 1, 0);
+ max_n = GENMASK(fd->nwidth - 1, 0);
+ }
+
+ rational_best_approximation(rate, *parent_rate, max_m, max_n, m, n);
}
static long clk_fd_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -169,13 +176,18 @@ static int clk_fd_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct clk_fractional_divider *fd = to_clk_fd(hw);
unsigned long flags = 0;
- unsigned long m, n;
+ unsigned long m, n, max_m, max_n;
u32 mmask, nmask;
u32 val;
- rational_best_approximation(rate, parent_rate,
- GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
- &m, &n);
+ if (fd->flags & CLK_FRAC_DIVIDER_ZERO_BASED) {
+ max_m = 1 << fd->mwidth;
+ max_n = 1 << fd->nwidth;
+ } else {
+ max_m = GENMASK(fd->mwidth - 1, 0);
+ max_n = GENMASK(fd->nwidth - 1, 0);
+ }
+ rational_best_approximation(rate, parent_rate, max_m, max_n, &m, &n);
if (fd->flags & CLK_FRAC_DIVIDER_ZERO_BASED) {
m--;
--
2.40.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-05-29 13:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-29 13:34 Frank Oltmanns [this message]
2023-05-29 13:34 ` [PATCH] clk: fractional-divider: Improve approximation when zero based Frank Oltmanns
2023-06-12 21:39 ` Stephen Boyd
2023-06-12 21:39 ` Stephen Boyd
2023-06-13 8:40 ` Frank Oltmanns
2023-06-13 8:40 ` Frank Oltmanns
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230529133433.56215-1-frank@oltmanns.dev \
--to=frank@oltmanns.dev \
--cc=Anson.Huang@nxp.com \
--cc=abelvesa@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=peng.fan@nxp.com \
--cc=ping.bai@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.