[PATCH v3 5/5] dt-bindings: iio: ad7192: Allow selection of clock modes

[fl.scratchpad@gmail.com]

From: Fabrizio Lamarque <fl.scratchpad@gmail.com>

AD7192 supports external clock sources, generated by a digital clock
source or a crystal oscillator, or internally generated clock option
without external components.

Describe choice between internal and external clock, crystal or external
oscillator, and internal clock output enable.

Signed-off-by: Fabrizio Lamarque <fl.scratchpad@gmail.com>
---
 .../bindings/iio/adc/adi,ad7192.yaml          | 27 ++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 16def2985ab4..f7ecfd65ad80 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -32,7 +32,8 @@ properties:
 
   clocks:
     maxItems: 1
-    description: phandle to the master clock (mclk)
+    description: |
+      Master clock (mclk). If not set, internal clock is used.
 
   clock-names:
     items:
@@ -50,6 +51,17 @@ properties:
   vref-supply:
     description: VRef voltage supply
 
+  adi,clock-xtal:
+    description: |
+      Select whether an external crystal oscillator or an external
+      clock is applied as master (mclk) clock.
+    type: boolean
+
+  adi,int-clock-output-enable:
+    description: |
+      When internal clock is selected, this bit enables clock out pin.
+    type: boolean
+
   adi,rejection-60-Hz-enable:
     description: |
       This bit enables a notch at 60 Hz when the first notch of the sinc
@@ -84,11 +96,12 @@ properties:
     description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
     type: boolean
 
+dependencies:
+  adi,clock-xtal: ['clocks', 'clock-names']
+
 required:
   - compatible
   - reg
-  - clocks
-  - clock-names
   - interrupts
   - dvdd-supply
   - avdd-supply
@@ -98,6 +111,13 @@ required:
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      required:
+        - clocks
+        - clock-names
+    then:
+      properties:
+        adi,int-clock-output-enable: false
 
 unevaluatedProperties: false
 
@@ -115,6 +135,7 @@ examples:
             spi-cpha;
             clocks = <&ad7192_mclk>;
             clock-names = "mclk";
+            adi,clock-xtal;
             interrupts = <25 0x2>;
             interrupt-parent = <&gpio>;
             dvdd-supply = <&dvdd>;
-- 
2.34.1