All of lore.kernel.org
 help / color / mirror / Atom feed
From: Udit Kumar <u-kumar1@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<conor+dt@kernel.org>, <m-chawdhry@ti.com>, <n-francis@ti.com>
Cc: Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH v2 4/5] arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux
Date: Thu, 1 Jun 2023 15:07:43 +0530	[thread overview]
Message-ID: <20230601093744.1565802-5-u-kumar1@ti.com> (raw)
In-Reply-To: <20230601093744.1565802-1-u-kumar1@ti.com>

main_i2c0 pin mux was duplicated in som and common file.
So removing duplicated node from common file

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 02d2e4b36b18..e12d93f56c51 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -106,13 +106,6 @@ J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
 };
 
 &main_pmx0 {
-	main_i2c0_pins_default: main-i2c0-pins-default {
-		pinctrl-single,pins = <
-			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
-			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
-		>;
-	};
-
 	main_uart0_pins_default: main_uart0_pins_default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Udit Kumar <u-kumar1@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<conor+dt@kernel.org>, <m-chawdhry@ti.com>, <n-francis@ti.com>
Cc: Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH v2 4/5] arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux
Date: Thu, 1 Jun 2023 15:07:43 +0530	[thread overview]
Message-ID: <20230601093744.1565802-5-u-kumar1@ti.com> (raw)
In-Reply-To: <20230601093744.1565802-1-u-kumar1@ti.com>

main_i2c0 pin mux was duplicated in som and common file.
So removing duplicated node from common file

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 02d2e4b36b18..e12d93f56c51 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -106,13 +106,6 @@ J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
 };
 
 &main_pmx0 {
-	main_i2c0_pins_default: main-i2c0-pins-default {
-		pinctrl-single,pins = <
-			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
-			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
-		>;
-	};
-
 	main_uart0_pins_default: main_uart0_pins_default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
-- 
2.34.1


  parent reply	other threads:[~2023-06-01  9:39 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-01  9:37 [PATCH v2 0/5] arm64: dts: ti: k3-j7200: Add properties and sync with uboot Udit Kumar
2023-06-01  9:37 ` Udit Kumar
2023-06-01  9:37 ` [PATCH v2 1/5] arm64: dts: ti: k3-j7200: Add general purpose timers Udit Kumar
2023-06-01  9:37   ` Udit Kumar
2023-06-01  9:37 ` [PATCH v2 2/5] arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads Udit Kumar
2023-06-01  9:37   ` Udit Kumar
2023-06-02  7:11   ` Tony Lindgren
2023-06-02  7:11     ` Tony Lindgren
2023-06-01  9:37 ` [PATCH v2 3/5] arm64: dts: ti: k3-j7200-common-proc-board: main_pmx0 clean up Udit Kumar
2023-06-01  9:37   ` Udit Kumar
2023-06-01 10:45   ` Nishanth Menon
2023-06-01 10:45     ` Nishanth Menon
2023-06-04  4:46     ` Kumar, Udit
2023-06-04  4:46       ` Kumar, Udit
2023-06-01  9:37 ` Udit Kumar [this message]
2023-06-01  9:37   ` [PATCH v2 4/5] arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux Udit Kumar
2023-06-01  9:37 ` [PATCH v2 5/5] arm64: dts: ti: k3-j7200-common-proc-board: Add uart pin mux in wkup_pmx0 Udit Kumar
2023-06-01  9:37   ` Udit Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230601093744.1565802-5-u-kumar1@ti.com \
    --to=u-kumar1@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m-chawdhry@ti.com \
    --cc=n-francis@ti.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.