From: Shawn Guo <shawnguo@kernel.org>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
Fabio Estevam <festevam@gmail.com>
Subject: Re: [PATCH v1 00/15] Maintenance updates for Protonic Holland boards
Date: Sun, 4 Jun 2023 21:08:03 +0800 [thread overview]
Message-ID: <20230604130803.GO4199@dragon> (raw)
In-Reply-To: <20230530120345.2874900-1-o.rempel@pengutronix.de>
On Tue, May 30, 2023 at 02:03:30PM +0200, Oleksij Rempel wrote:
> This patchset consists of several updates that address issues on
> Protonic Holland's supported i.MX6-based devices, with a particular
> focus on the USB subsystem configuration, thermal zones, and the naming
> of GPIO keys. Some of these changes include the activation of USB over-
> current detection on certain ports, the disabling of unused USB PHY
> nodes, fixing USB-related warnings, adding trip points to thermal zones
> on several devices, and renaming the 'power' key to meet the necessary
> conventions.
>
> David Jander (1):
> ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
>
> Oleksij Rempel (11):
> ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
> ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG
> node
> ARM: dts: imx6dl: Add trip points to thermal zones on several devices
> ARM: dts: imx6dl: vicut1: Address USB related warnings
> ARM: dts: imx6dl: alti6p: fix different USB related warnings
> ARM: dts: imx6dl: prtmvt: fix different USB related warnings
> ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG
> port
> ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG
> port
> ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG
> port
> ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related
> warnings
> ARM: dts: imx6qdl: vicut1: rename power to power-button
>
> Robin van der Gracht (3):
> ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
> ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
> ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and
> MDC
Applied all, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
Fabio Estevam <festevam@gmail.com>
Subject: Re: [PATCH v1 00/15] Maintenance updates for Protonic Holland boards
Date: Sun, 4 Jun 2023 21:08:03 +0800 [thread overview]
Message-ID: <20230604130803.GO4199@dragon> (raw)
In-Reply-To: <20230530120345.2874900-1-o.rempel@pengutronix.de>
On Tue, May 30, 2023 at 02:03:30PM +0200, Oleksij Rempel wrote:
> This patchset consists of several updates that address issues on
> Protonic Holland's supported i.MX6-based devices, with a particular
> focus on the USB subsystem configuration, thermal zones, and the naming
> of GPIO keys. Some of these changes include the activation of USB over-
> current detection on certain ports, the disabling of unused USB PHY
> nodes, fixing USB-related warnings, adding trip points to thermal zones
> on several devices, and renaming the 'power' key to meet the necessary
> conventions.
>
> David Jander (1):
> ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
>
> Oleksij Rempel (11):
> ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
> ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG
> node
> ARM: dts: imx6dl: Add trip points to thermal zones on several devices
> ARM: dts: imx6dl: vicut1: Address USB related warnings
> ARM: dts: imx6dl: alti6p: fix different USB related warnings
> ARM: dts: imx6dl: prtmvt: fix different USB related warnings
> ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG
> port
> ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG
> port
> ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG
> port
> ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related
> warnings
> ARM: dts: imx6qdl: vicut1: rename power to power-button
>
> Robin van der Gracht (3):
> ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
> ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
> ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and
> MDC
Applied all, thanks!
next prev parent reply other threads:[~2023-06-04 13:08 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 12:03 [PATCH v1 00/15] Maintenance updates for Protonic Holland boards Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 01/15] ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 02/15] ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 03/15] ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 04/15] ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 05/15] ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 06/15] ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 07/15] ARM: dts: imx6dl: Add trip points to thermal zones on several devices Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 08/15] ARM: dts: imx6dl: vicut1: Address USB related warnings Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 09/15] ARM: dts: imx6dl: alti6p: fix different " Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 10/15] ARM: dts: imx6dl: prtmvt: " Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 11/15] ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 12/15] ARM: dts: imx6ul: prti6g: fix USB over-current " Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 13/15] ARM: dts: imx6dl: plybas: " Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 14/15] ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 15/15] ARM: dts: imx6qdl: vicut1: rename power to power-button Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-06-04 13:08 ` Shawn Guo [this message]
2023-06-04 13:08 ` [PATCH v1 00/15] Maintenance updates for Protonic Holland boards Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230604130803.GO4199@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.