[PATCH 4/9] MIPS: DTS: CI20: Do not force-enable CIM and WiFi regulators

[Paul Cercueil <paul@crapouillou.net>]

These regulators should be enabled by their respective drivers.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 662796acda41..7f6e7a4e3915 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -272,19 +272,16 @@ wifi_io: LDO6 {
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 				inl-supply = <&vcc_33v>;
-				regulator-always-on;
 			};
 			cim_io_28: LDO7 {
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				inl-supply = <&vcc_33v>;
-				regulator-always-on;
 			};
 			cim_io_15: LDO8 {
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
 				inl-supply = <&vcc_33v>;
-				regulator-always-on;
 			};
 			vrtc_18: LDO_REG9 {
 				/* Despite the datasheet stating 3.3V
-- 
2.39.2