[PATCH 6/6] arm64: dts: meson-t7-a311d2-khadas-vim4: add initial device-tree

[Lucas Tanure <tanure@linux.com>]

The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC
family, on a board with the same form factor as the VIM3 models.

- 8GB LPDDR4X 2016MHz
- 32GB eMMC 5.1 storage
- 32MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
- HDMI 2.1 video
- HDMI Input
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot

Signed-off-by: Lucas Tanure <tanure@linux.com>
---
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../amlogic/meson-t7-a311d2-khadas-vim4.dts   | 112 ++++++++++
 arch/arm64/boot/dts/amlogic/meson-t7.dtsi     | 202 ++++++++++++++++++
 3 files changed, 315 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cd1c5b04890a..1c5846bd1ca0 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-t7-a311d2-khadas-vim4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
new file mode 100644
index 000000000000..46e175536edf
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Wesion, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-t7.dtsi"
+
+/ {
+	model = "Khadas VIM4";
+
+	aliases {
+		serial0 = &uart_A;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <689000>;
+		regulator-max-microvolt = <1049000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <689000>;
+		regulator-max-microvolt = <1049000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&clkc{
+	clocks = <&xtal>;
+	clock-names = "xtal";
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_a>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_a>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu_a>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu_a>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_b>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_b>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_b>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_b>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-t7.dtsi b/arch/arm64/boot/dts/amlogic/meson-t7.dtsi
new file mode 100644
index 000000000000..453b3d9cb9d8
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-t7.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/mesont7-clkc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "amlogic,t7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu100>;
+				};
+				core1 {
+					cpu = <&cpu101>;
+				};
+				core2 {
+					cpu = <&cpu102>;
+				};
+				core3 {
+					cpu = <&cpu103>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <632>;
+			dynamic-power-coefficient = <110>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101{
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <632>;
+			dynamic-power-coefficient = <110>;
+			#cooling-cells = <2>;
+		};
+
+		cpu102: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <632>;
+			dynamic-power-coefficient = <110>;
+			#cooling-cells = <2>;
+		};
+
+		cpu103: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <632>;
+			dynamic-power-coefficient = <110>;
+			#cooling-cells = <2>;
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <550>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <550>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <550>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <550>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 0xff08>,
+			     <GIC_PPI 14 0xff08>,
+			     <GIC_PPI 11 0xff08>,
+			     <GIC_PPI 10 0xff08>;
+	};
+
+	gic: interrupt-controller@fff01000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0xfff01000 0 0x1000>,
+		      <0x0 0xfff02000 0 0x0100>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		apb4: apb4@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			clkc: clock-controller {
+				compatible = "amlogic,t7-clkc";
+				#clock-cells = <1>;
+				reg = <0x0 0x0 0x0 0x49c>,
+				      <0x0 0x8000 0x0 0x320>,
+				      <0x0 0xe040 0x0 0xbc>;
+				reg-names = "basic",
+					    "pll",
+					    "cpu_clk";
+			};
+
+			ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg=<0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+		};
+
+		uart_A: serial@fe078000 {
+			compatible = "amlogic,meson-t7-uart";
+			reg = <0x0 0xfe078000 0x0 0x18>;
+			interrupts = <0 168 1>;
+			status = "disabled";
+			clocks = <&xtal>, <&clkc CLKID_UART_A>, <&xtal>;
+			clock-names = "xtal", "pclk", "baud";
+			fifo-size = < 64 >;
+			pinctrl-names = "default";
+		};
+	};
+};
+
--
2.41.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic