All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address
Date: Thu, 15 Jun 2023 16:53:12 -0500	[thread overview]
Message-ID: <20230615215314.5402-3-aford173@gmail.com> (raw)
In-Reply-To: <20230615215314.5402-1-aford173@gmail.com>

The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index bc531175ff76..d5c6fc68d656 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -141,11 +141,11 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	camera@3c {
+	camera@10 {
 		compatible = "ovti,ov5640";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
+		reg = <0x10>;
 		clocks = <&clk IMX8MM_CLK_CLKO1>;
 		clock-names = "xclk";
 		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address
Date: Thu, 15 Jun 2023 16:53:12 -0500	[thread overview]
Message-ID: <20230615215314.5402-3-aford173@gmail.com> (raw)
In-Reply-To: <20230615215314.5402-1-aford173@gmail.com>

The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index bc531175ff76..d5c6fc68d656 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -141,11 +141,11 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	camera@3c {
+	camera@10 {
 		compatible = "ovti,ov5640";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
+		reg = <0x10>;
 		clocks = <&clk IMX8MM_CLK_CLKO1>;
 		clock-names = "xclk";
 		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
-- 
2.39.2


  parent reply	other threads:[~2023-06-15 21:54 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-15 21:53 [PATCH V3 0/3] arm64: dts: imx8mn/imx8mm-beacon: Add HDMI Adam Ford
2023-06-15 21:53 ` Adam Ford
2023-06-15 21:53 ` [PATCH 1/3] arm64: dts: imx8mn-beacon: Add HDMI video with sound Adam Ford
2023-06-15 21:53   ` Adam Ford
2023-06-15 21:53 ` Adam Ford [this message]
2023-06-15 21:53   ` [PATCH 2/3] arm64: dts: imx8mm-beacon: Change camera I2C address Adam Ford
2023-06-15 21:53 ` [PATCH 3/3] arm64: dts: imx8mm-beacon: Add HDMI video with sound Adam Ford
2023-06-15 21:53   ` Adam Ford
2023-06-22 16:09 ` [PATCH V3 0/3] arm64: dts: imx8mn/imx8mm-beacon: Add HDMI Adam Ford
2023-06-22 16:09   ` Adam Ford
2023-07-18  1:27 ` Shawn Guo
2023-07-18  1:27   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230615215314.5402-3-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=aford@beaconembedded.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.