From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Arnd Bergmann <arnd@arndb.de>, Sasha Levin <sashal@kernel.org>,
bcousson@baylibre.com, tony@atomide.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com,
claudiu.beznea@microchip.com, shawnguo@kernel.org,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.10 08/14] ARM: dts: Fix erroneous ADS touchscreen polarities
Date: Fri, 16 Jun 2023 06:27:45 -0400 [thread overview]
Message-ID: <20230616102753.673975-8-sashal@kernel.org> (raw)
In-Reply-To: <20230616102753.673975-1-sashal@kernel.org>
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit 4a672d500bfd6bb87092c33d5a2572c3d0a1cf83 ]
Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so
that operating systems can rely on the flag being correctly set.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +-
arch/arm/boot/dts/at91sam9261ek.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 2 +-
arch/arm/boot/dts/imx7d-sdb.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +-
arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +-
arch/arm/boot/dts/omap3-pandora-common.dtsi | 2 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index aed81568a297d..d783d1f6950be 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@ touchscreen@1 {
interrupt-parent = <&gpio1>;
interrupts = <31 0>;
- pendown-gpio = <&gpio1 31 0>;
+ pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index beed819609e8d..8f3b483bb64dd 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@ tsc2046@2 {
compatible = "ti,ads7843";
interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
spi-max-frequency = <3000000>;
- pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <150>;
ti,x-max = /bits/ 16 <3830>;
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index d917dc4f2f227..6ad39dca70096 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -64,7 +64,7 @@ ads7846@0 {
interrupt-parent = <&gpio2>;
interrupts = <7 0>;
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio2 7 0>;
+ pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
vcc-supply = <®_3p3v>;
ti,x-min = /bits/ 16 <0>;
ti,x-max = /bits/ 16 <4095>;
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 6d562ebe90295..d3b49a5b30b72 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -198,7 +198,7 @@ tsc2046@0 {
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
- pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
touchscreen-max-pressure = <255>;
wakeup-source;
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index e61b8a2bfb7de..51baedf1603bd 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -227,7 +227,7 @@ ads7846@0 {
interrupt-parent = <&gpio2>;
interrupts = <25 0>; /* gpio_57 */
- pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6ca..a7f99ae0c1fe9 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@ ads7846@0 {
interrupt-parent = <&gpio1>;
interrupts = <27 0>; /* gpio_27 */
- pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 73d477898ec2a..06e7cf96c6639 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -311,7 +311,7 @@ tsc2046@0 {
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
vcc-supply = <®_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 1d6e88f99eb31..c3570acc35fad 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -149,7 +149,7 @@ ads7846@0 {
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7e30f9d45790e..d95a0e130058c 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -160,7 +160,7 @@ ads7846@0 {
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 37608af6c07f5..ca6d777ebf843 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -651,7 +651,7 @@ tsc2046@0 {
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */
- pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>;
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a580..e62ea8b6d53fd 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -354,7 +354,7 @@ ads7846@0 {
interrupt-parent = <&gpio1>;
interrupts = <15 0>; /* gpio1_wk15 */
- pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
--
2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
devicetree@vger.kernel.org, conor+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, Arnd Bergmann <arnd@arndb.de>,
tony@atomide.com, Linus Walleij <linus.walleij@linaro.org>,
robh+dt@kernel.org, alexandre.belloni@bootlin.com,
bcousson@baylibre.com, linux-omap@vger.kernel.org,
shawnguo@kernel.org, claudiu.beznea@microchip.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.10 08/14] ARM: dts: Fix erroneous ADS touchscreen polarities
Date: Fri, 16 Jun 2023 06:27:45 -0400 [thread overview]
Message-ID: <20230616102753.673975-8-sashal@kernel.org> (raw)
In-Reply-To: <20230616102753.673975-1-sashal@kernel.org>
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit 4a672d500bfd6bb87092c33d5a2572c3d0a1cf83 ]
Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so
that operating systems can rely on the flag being correctly set.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +-
arch/arm/boot/dts/at91sam9261ek.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 2 +-
arch/arm/boot/dts/imx7d-sdb.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +-
arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +-
arch/arm/boot/dts/omap3-pandora-common.dtsi | 2 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index aed81568a297d..d783d1f6950be 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@ touchscreen@1 {
interrupt-parent = <&gpio1>;
interrupts = <31 0>;
- pendown-gpio = <&gpio1 31 0>;
+ pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index beed819609e8d..8f3b483bb64dd 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@ tsc2046@2 {
compatible = "ti,ads7843";
interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
spi-max-frequency = <3000000>;
- pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <150>;
ti,x-max = /bits/ 16 <3830>;
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index d917dc4f2f227..6ad39dca70096 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -64,7 +64,7 @@ ads7846@0 {
interrupt-parent = <&gpio2>;
interrupts = <7 0>;
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio2 7 0>;
+ pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
vcc-supply = <®_3p3v>;
ti,x-min = /bits/ 16 <0>;
ti,x-max = /bits/ 16 <4095>;
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 6d562ebe90295..d3b49a5b30b72 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -198,7 +198,7 @@ tsc2046@0 {
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
- pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
touchscreen-max-pressure = <255>;
wakeup-source;
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index e61b8a2bfb7de..51baedf1603bd 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -227,7 +227,7 @@ ads7846@0 {
interrupt-parent = <&gpio2>;
interrupts = <25 0>; /* gpio_57 */
- pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6ca..a7f99ae0c1fe9 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@ ads7846@0 {
interrupt-parent = <&gpio1>;
interrupts = <27 0>; /* gpio_27 */
- pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 73d477898ec2a..06e7cf96c6639 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -311,7 +311,7 @@ tsc2046@0 {
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
vcc-supply = <®_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 1d6e88f99eb31..c3570acc35fad 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -149,7 +149,7 @@ ads7846@0 {
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7e30f9d45790e..d95a0e130058c 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -160,7 +160,7 @@ ads7846@0 {
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 37608af6c07f5..ca6d777ebf843 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -651,7 +651,7 @@ tsc2046@0 {
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */
- pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>;
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a580..e62ea8b6d53fd 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -354,7 +354,7 @@ ads7846@0 {
interrupt-parent = <&gpio1>;
interrupts = <15 0>; /* gpio1_wk15 */
- pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-06-16 10:34 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-16 10:27 [PATCH AUTOSEL 5.10 01/14] Input: soc_button_array - add invalid acpi_index DMI quirk handling Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 02/14] s390/cio: unregister device when the only path is gone Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 03/14] spi: lpspi: disable lpspi module irq in DMA mode Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 04/14] ASoC: simple-card: Add missing of_node_put() in case of error Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 05/14] soundwire: qcom: add proper error paths in qcom_swrm_startup() Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 06/14] ASoC: nau8824: Add quirk to active-high jack-detect Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 07/14] s390/purgatory: disable branch profiling Sasha Levin
2023-06-16 10:27 ` Sasha Levin
2023-06-16 10:27 ` Sasha Levin [this message]
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 08/14] ARM: dts: Fix erroneous ADS touchscreen polarities Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 09/14] drm/exynos: vidi: fix a wrong error return Sasha Levin
2023-06-16 10:27 ` Sasha Levin
2023-06-16 10:27 ` Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 10/14] drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl Sasha Levin
2023-06-16 10:27 ` Sasha Levin
2023-06-16 10:27 ` Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 11/14] drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl Sasha Levin
2023-06-16 10:27 ` Sasha Levin
2023-06-16 10:27 ` Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 12/14] Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled" Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 13/14] ext4: only check dquot_initialize_needed() when debugging Sasha Levin
2023-06-16 10:27 ` [PATCH AUTOSEL 5.10 14/14] vhost_vdpa: tell vqs about the negotiated Sasha Levin
2023-06-16 10:27 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230616102753.673975-8-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=bcousson@baylibre.com \
--cc=claudiu.beznea@microchip.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.