From: Josua Mayer <josua@solid-run.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Josua Mayer <josua@solid-run.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH 0/3] arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board
Date: Fri, 16 Jun 2023 14:06:07 +0300 [thread overview]
Message-ID: <20230616110610.32173-1-josua@solid-run.com> (raw)
Add support for the SolidRun LX2162A System on Module (SoM), and the
Clearfog evaluation board.
This patch-set introduces:
- dt node for lx2160a serdes block #2
- dtsi for lx2162a system on module
- dts for lx2162 clearfog
Firstly Please note that checkpatch was complaining about the EEPROMS:
- DT compatible string "st,24c02" appears un-documented
- DT compatible string "st,24c2048" appears un-documented
- DT compatible string "atmel,24c2048" appears un-documented
However to my eyes these *are* already documented in at24.yaml,
and are also used in existing device-tree.
Secondly the MAINTAINERS file has not been modified.
Is it required I add myself or *someone* for these new dts?
Josua Mayer (3):
arm64: dts: lx2160a: describe the SerDes block #2
dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board
arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board
.../devicetree/bindings/arm/fsl.yaml | 2 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 +
.../dts/freescale/fsl-lx2162a-clearfog.dts | 369 ++++++++++++++++++
.../dts/freescale/fsl-lx2162a-sr-som.dtsi | 78 ++++
5 files changed, 456 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
--
2.35.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Josua Mayer <josua@solid-run.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Josua Mayer <josua@solid-run.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH 0/3] arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board
Date: Fri, 16 Jun 2023 14:06:07 +0300 [thread overview]
Message-ID: <20230616110610.32173-1-josua@solid-run.com> (raw)
Add support for the SolidRun LX2162A System on Module (SoM), and the
Clearfog evaluation board.
This patch-set introduces:
- dt node for lx2160a serdes block #2
- dtsi for lx2162a system on module
- dts for lx2162 clearfog
Firstly Please note that checkpatch was complaining about the EEPROMS:
- DT compatible string "st,24c02" appears un-documented
- DT compatible string "st,24c2048" appears un-documented
- DT compatible string "atmel,24c2048" appears un-documented
However to my eyes these *are* already documented in at24.yaml,
and are also used in existing device-tree.
Secondly the MAINTAINERS file has not been modified.
Is it required I add myself or *someone* for these new dts?
Josua Mayer (3):
arm64: dts: lx2160a: describe the SerDes block #2
dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board
arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board
.../devicetree/bindings/arm/fsl.yaml | 2 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 +
.../dts/freescale/fsl-lx2162a-clearfog.dts | 369 ++++++++++++++++++
.../dts/freescale/fsl-lx2162a-sr-som.dtsi | 78 ++++
5 files changed, 456 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
--
2.35.3
next reply other threads:[~2023-06-16 11:07 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-16 11:06 Josua Mayer [this message]
2023-06-16 11:06 ` [PATCH 0/3] arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board Josua Mayer
2023-06-16 11:06 ` [PATCH 1/3] arm64: dts: lx2160a: describe the SerDes block #2 Josua Mayer
2023-06-16 11:06 ` Josua Mayer
2023-06-16 11:06 ` [PATCH 2/3] dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board Josua Mayer
2023-06-16 11:06 ` Josua Mayer
2023-06-16 11:36 ` Krzysztof Kozlowski
2023-06-16 11:36 ` Krzysztof Kozlowski
2023-06-16 13:32 ` Josua Mayer
2023-06-16 13:32 ` Josua Mayer
2023-06-16 16:57 ` Andreas Kemnade
2023-06-16 16:57 ` Andreas Kemnade
2023-06-17 13:34 ` Josua Mayer
2023-06-17 13:34 ` Josua Mayer
2023-06-16 16:59 ` Krzysztof Kozlowski
2023-06-16 16:59 ` Krzysztof Kozlowski
2023-06-17 14:09 ` Josua Mayer
2023-06-17 14:09 ` Josua Mayer
2023-06-16 11:06 ` [PATCH 3/3] arm64: dts: freescale: Add support for LX2162 " Josua Mayer
2023-06-16 11:06 ` Josua Mayer
2023-06-16 11:39 ` Krzysztof Kozlowski
2023-06-16 11:39 ` Krzysztof Kozlowski
2023-06-16 12:57 ` Josua Mayer
2023-06-16 12:57 ` Josua Mayer
2023-06-16 16:59 ` Krzysztof Kozlowski
2023-06-16 16:59 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230616110610.32173-1-josua@solid-run.com \
--to=josua@solid-run.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.