Re: [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format

[Rob Herring <robh@kernel.org>]

On Tue, Jun 13, 2023 at 04:34:44PM +0800, Xu Yang wrote:
> Convert the binding to DT schema format. Besides, this also add clocks,
> '#phy-cells', phy-3p0-supply and power-domains properties which are not
> contained in txt file due to txt file lack updates.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> 
> ---
> Changes in v2:
>  - change filename to fsl,mxs-usbphy.yaml
>  - add other optional properties
>  - narrow fsl,anatop to imx6
>  - use additionalProperties
> Changes in v3:
>  - fix indentation
>  - add clocks property to example
> Changes in v4:
>  - remove [fsl,imx7ulp-usbphy, fsl,imx6ul-usbphy]
>  - limit item of reg and interrupts to 1
>  - sort enum items
>  - modify commit message
> ---
>  .../bindings/phy/fsl,mxs-usbphy.yaml          | 125 ++++++++++++++++++
>  .../devicetree/bindings/phy/mxs-usb-phy.txt   |  33 -----
>  2 files changed, 125 insertions(+), 33 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt

This should be applied by the PHY maintainers, but they weren't Cc'ed.

> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> new file mode 100644
> index 000000000000..cc9f2bc7e6fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale MXS USB Phy Device
> +
> +maintainers:
> +  - Xu Yang <xu.yang_2@nxp.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - fsl,imx23-usbphy
> +          - fsl,imx7ulp-usbphy
> +          - fsl,vf610-usbphy
> +      - items:
> +          - enum:
> +              - fsl,imx28-usbphy
> +              - fsl,imx6ul-usbphy
> +              - fsl,imx6sl-usbphy
> +              - fsl,imx6sx-usbphy
> +              - fsl,imx6q-usbphy
> +          - const: fsl,imx23-usbphy
> +      - items:
> +          - const: fsl,imx6sll-usbphy
> +          - const: fsl,imx6ul-usbphy
> +          - const: fsl,imx23-usbphy
> +      - items:
> +          - const: fsl,imx8dxl-usbphy
> +          - const: fsl,imx7ulp-usbphy
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  '#phy-cells':
> +    const: 0
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  fsl,anatop:
> +    description:
> +      phandle for anatop register, it is only for imx6 SoC series.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +  phy-3p0-supply:
> +    description:
> +      One of USB PHY's power supply. Can be used to keep a good signal
> +      quality.
> +
> +  fsl,tx-cal-45-dn-ohms:
> +    description:
> +      Resistance (in ohms) of switchable high-speed trimming resistor
> +      connected in parallel with the 45 ohm resistor that terminates
> +      the DN output signal.
> +    minimum: 35
> +    maximum: 54
> +    default: 45
> +
> +  fsl,tx-cal-45-dp-ohms:
> +    description:
> +      Resistance (in ohms) of switchable high-speed trimming resistor
> +      connected in parallel with the 45 ohm resistor that terminates
> +      the DP output signal.
> +    minimum: 35
> +    maximum: 54
> +    default: 45
> +
> +  fsl,tx-d-cal:
> +    description:
> +      Current trimming value (as a percentage) of the 17.78 mA TX
> +      reference current.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 79
> +    maximum: 119
> +    default: 100
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          oneOf:
> +            - enum:
> +                - fsl,imx6q-usbphy
> +                - fsl,imx6sl-usbphy
> +                - fsl,imx6sx-usbphy
> +                - fsl,imx6sll-usbphy
> +                - fsl,vf610-usbphy
> +            - items:
> +                - const: fsl,imx6ul-usbphy
> +                - const: fsl,imx23-usbphy
> +    then:
> +      required:
> +        - fsl,anatop
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/imx6qdl-clock.h>
> +
> +    usbphy1: usb-phy@20c9000 {
> +        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> +        reg = <0x020c9000 0x1000>;
> +        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
> +        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +        fsl,anatop = <&anatop>;
> +    };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> deleted file mode 100644
> index 70c813b0755f..000000000000
> --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -* Freescale MXS USB Phy Device
> -
> -Required properties:
> -- compatible: should contain:
> -	* "fsl,imx23-usbphy" for imx23 and imx28
> -	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
> -	* "fsl,imx6sl-usbphy" for imx6sl
> -	* "fsl,vf610-usbphy" for Vybrid vf610
> -	* "fsl,imx6sx-usbphy" for imx6sx
> -	* "fsl,imx7ulp-usbphy" for imx7ulp
> -	* "fsl,imx8dxl-usbphy" for imx8dxl
> -  "fsl,imx23-usbphy" is still a fallback for other strings
> -- reg: Should contain registers location and length
> -- interrupts: Should contain phy interrupt
> -- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
> -
> -Optional properties:
> -- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> -  high-speed trimming resistor connected in parallel with the 45 ohm resistor
> -  that terminates the DN output signal. Default: 45
> -- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> -  high-speed trimming resistor connected in parallel with the 45 ohm resistor
> -  that terminates the DP output signal. Default: 45
> -- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
> -  the 17.78mA TX reference current. Default: 100
> -
> -Example:
> -usbphy1: usb-phy@20c9000 {
> -	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> -	reg = <0x020c9000 0x1000>;
> -	interrupts = <0 44 0x04>;
> -	fsl,anatop = <&anatop>;
> -};
> -- 
> 2.34.1
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy